Is there any one able to read between the lines I need someone can seeing problem not reading surly there are too much faced the same problem and there a tons of trying.
Actually problem is that.. My JAMin is G3 chipset.. But.. truth to tell; I hardspl it with G4 flash to see what will happening..! Now;
IPL: 1.00
SPL: 2.G4.4PDA
( bootloader ) since 2 years ago and no more than and tons of trying and when I run a hardspl for G3 as usual 1- invalid tools / 2- when trying the original ROM it stopped at 80% and check the NBF / 3- when I run downgrade.bat I see the ( cmd ) dialog and it says would you like to try copy again when intlizing my dead JAMin I never gave up yet and useless no matter what I do. NOW; I am digging my JAMin grave..!
my JAMin is detect as G4 chipset.. but it is G3
correct me if im wrong.. you flashed your G3 device with something thats meant for a G4 device?
well if thats the case this is a problem for you since you flashed a wrong thingy in your device. its bricked somehow... and you need some JTAG PINS for you to be able to revive your phone...
im sure there are lots of topics that are made and youre not alone who has this problem... good thing there is a SEARCH button up there better check that out... coz i havent bricked my prophet yet
yea I did it you .....
try 2 do the same its easy just run hard spl G4 that's it man lol
Marek... can you help me please or someone in somewhere online
your in a tight situation dude... you bricked your device by flashing a G4 software on your device G3. remember that G3/G4 is a chipset and it will only run if you flash a correct software that is if your device is G3 you should have flashed a software for G3 devices only...
i cant help you with this coz reviving a dead device like in your situation is somehow difficult for me... what i would advice you to do is to bring this device to a qualified HTC technician that knows what to do...
thats why in this forum ROM developers always say "take note if your device is G3 or G4 or else you would brick your device"
do take it to a technician he knows what to do...
best of luck
Related
I have read the related topic about Prophet that it has G3 and G4 model. However, can someone tell me the difference of G3 and G4? Thanks!
Please read at XDA Wiki. There got information that you need. Thanks
The different betwen G3 and G4 is the used Disk On Chip IC. They have different Adressing Modes and use different True FFS Driver Settings. If you brick your Phone, the IPL doesnt found the right entry point to Jump in the SPL to Boot the Bootloader Mode or the OS. If i get a bricket or damage board i can search for JTAG Points to reflash a damage Device.
Hi Guys,
i pointed out that if you have G4 you wont be able to bring it back to the original stand-so you will loose your warranty in any case if you update your G4 model with new ipl/spl cause so far i know there is no way to downgrade it again.You wont be able to install original Software until your device is CID locked and there is no solution for cid unlocking for G4 so far.
charliess said:
i pointed out that if you have G4 you wont be able to bring it back to the original stand-so you will loose your warranty in any case if you update your G4 model with new ipl/spl cause so far i know there is no way to downgrade it again.
Click to expand...
Click to collapse
Why to upgrade IPL/SPL ???
charliess said:
You wont be able to install original Software until your device is CID locked and there is no solution for cid unlocking for G4 so far.
Click to expand...
Click to collapse
There is no free CID unlock, it's different
And you be able to install original software but not able to install official Operating System from other country , really different.
you can flash any Rom you want without any CID unlocked, just you can't downgarde the SPL, so just remove the SPL from any rom, so you are the Newbie here, there was a lot of threads bout this, sorry
IPL SPL, the software that runs the hardware, it is like bios of the motherboard or firmware of any hardware, it is important to update them
paradis_pal said:
you can flash any Rom you want without any CID unlocked, just you can't downgarde the SPL, so just remove the SPL from any rom, so you are the Newbie here, there was a lot of threads bout this, sorry
IPL SPL, the software that runs the hardware, it is like bios of the motherboard or firmware of any hardware, it is important to update them
Click to expand...
Click to collapse
ähm sorry...but in any case -then tell me please how to get back the warranty it is not possible or?if you update ipl/spl what happens normally just by updating your os with the files you can download from here-gullums etc. then there is no way back to install the original updates from o2.Sure you can CID unlock for money- who wants that?i want it for free but there is no solution.So i started this thread juust to warn noObs not to update cause there is no way back without paying.got it? also i flashed my phone without ipl/spl i ve never said it doesnt work but i guess doing that wont give back warranty cause they also check ipl and spl and see that the device has been upgraded with some other versions->warranty gone.So instead of telling me what to post and saying that im the "dumb" you should bring solutions or simply not comment this thread-cause nobody could helped me with my problem i got no answers,so now to answer this thread is anything but not useful-sry guys my opinion
please check this http://forum.xda-developers.com/showthread.php?t=300356
if you missunderstand someting please ask me
paradis_pal said:
please check this http://forum.xda-developers.com/showthread.php?t=300356
if you missunderstand someting please ask me
Click to expand...
Click to collapse
thank you for this thread but i already know it,even it is possible to install the different os versions without CID lock by following steps in this thread you wont be able to use the updates provided on the O2 site and IPL / SPL is still different to the originial ones-i wanted to sell my phone i have 1 year warranty left but i guess it doenst matter-who would buy a prophet with warranty if O2 would say it as none,cause it has being modified and who would buy a prophet if you are not able to install original software without spending money for this or something like that.but thx for your help
online warranty, will check the SPL? is that what you mean?
you may wait for my solution to write SPL using pdocwrite,
IPL can be downgrade without any problem, only spl has the problem, and if you write the SPL using pdocwrite, and install all using nb2nbf it will be again your old phone
SPL has nothing to do with OS, if you just install os.nb and extention.nb, no one can check it online,
I think, you may download your o2 orginial rom, and extract the nb files, make new one without only SPL it will work and maybe the supports guys will not notice, it will be your phone again
untell I write how to write the SPL using pdocwrite, if you restore your old SPL even the HTC support can't notice you istalled other roms
I had 2 modified prophet back to warranty and they don't check the IPL/SPL stuff.... lol do you think they care about that ? And spend a tech to check dead devices for boot loaders ? no way
Maybe HTC do, but then they don't care anymore.
You just have to put your old rom back.... if you had back it up or are able to find a download that suits.
@paradis_pal: if I understood correctly, your solution will downgrade the IPL/SPL but with a higher version number to fake the protection, so it will still appear as modified
no, using pdocwrite will flash 2.20 again
and you misunderstood me, I was writing what charliess was thinking, I think no one will check the SPL as you wrote, if you read my first post in this thread you wouldn't misunderstood me
Hi,
Im have a G4 mda vario!
ipl 2.21.0001
spl 2.21.0001
original software t-mobile.
Im trying to figure out the best way to upgrade to wm6. Some topics say to unlock CID but with a G4 you must pay for it. Other topic say use hard spl or soft spl is this also for CID unlocking?? I dont know annymore so can someone help me?? The steps I need to make to install wm6 on my device.
And for the best wm6 rom on htc wizard aka mda vario.
Thnx!
Kevin
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
if you want to save yourself an absolute tonne of mucking about and trying to figure everything out, i recommend you splash the cash and pay the £20 on http://www.imei-check.co.uk/
i have a g4 and used these guys, worked with absolute no issues, and im on the xmr5 rom ( or whatever its called )
funy said:
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
Click to expand...
Click to collapse
the above recomendation are good , in fact that's what i have done to update my G4. I would only add to that rembember to save your current rom and extended rom before update. so you may downgrade if you have any problem with wm6.
I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Will no-one help??
RUU_Prophet_220734_2207114_024721_NVID.exe try to find this file
Tried this, but the flashing failed.
noonas said:
I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Click to expand...
Click to collapse
Probably you shouldn't have given it to your friend....There must be a fix somewhere.
I'd be asking your friend to find it. Good luck.
try this
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It may not help with mixing the G3 and G4 up.....
I am afraid the phone is bricked, as i seem to remember from the time i had my Prophet, flashing with the wrong G type firmware cause an irrevirsible brickage as they are completley different chips on the actual device... someone had a "gold card" method they were researching but i dont think it really got anywhere!
mm the prohet is bricked im afraid. I have read many posts in the past in the prohet mobile 6 section, if you go through the posts and spend some time you will see the advice given to those unfortunate souls who did the same thing.....
Give them all a go, you have nothing to loose!
no problem
don't wory my frind i fixe my device and you can just try a rom with no VondorID they have 3 i fond in the forum the first don't work for me but the 2 work very well !!
don't wory don't wory don't wory
Hi All,
I am new to prophet. I wanted to flash one of the new 6.5 Rom on my phone. Its an Imate Jamin phone. But I am confused as to whether is my phone a G3 Phone or G4 phone. How do you differenciate / understand what phone you have?
Also what is the difference between G3 and G4?
Thanks
Regards,
Kailash
all in one
you can read here so that your questions can be answered..
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
goodluck
Thanks a lot for the information link that you provided me. This has helped me a lot.
I am also facing another issue. When I try to run the Hard SPL on my PC to install it on the phone --> it will go all the way till the time the phone screen turns into 3 colors and the moment it does that there is an error in the RUU stating this MFC application has performed an illegal operations. Windows will now close this operation and I get a msg box saying send information or don't
Please help.
Kailash
1. what Operating system are you using? XP or Vista?
2. While in bootloader mode <3 color screen> does it show USB on the lower left corner of your phone screen? and does it show RUU on upper right corner of the same screen?
3. If there are errors still and theres a code given like Error code 345 < example only > define it here.. file attached
4.Btw, did you hardSpl'ed your device without knowing if its G3 or G4???? (
5. if youre using Vista as OS on your PC and got about with g3 and g4 prob read this...
http://forum.xda-developers.com/showthread.php?t=485293
PS. i will be off to Thailand tomorrow but i will have a lappy with me.. hope i can still connect to this forum.. will try my best...
Hi Marek
Thanks a lot for the link that you provided. I have windows 7 as by OS and that could be the reason for the error.
Will try it and let you know. Thanks anyways for the help.
Another think. I used my other Windows XP machine for updating the rom but after installation of the rom - computer screens shows finish but on handset restart it still has window 5. What could be the reason for this. Can you help.
Thanks
Regards
Kailash
hello
have you tried hardspl?? provide me the ipl and spl youre getting the moment you boot up your device...
heres how you can get your IPL/SPL
soft reset your device... and while its booting up look at the upper right corner of your screen there you will see your ipl and spl ... iuf you have SPL like
2.g3.4pda < for g3 models > 2.g4.4pda <for g4 models ... hope im right for g4 coz i have g3>. if you dont have this spl you need to hardspl your device first before trying to flash a new rom for example WM6.1 or more...
heres a link if you dont have hardspl on your device
http://forum.xda-developers.com/showthread.php?t=350033
follow closely and MAKE SURE YOU HAVE THE RIGHT MODEL ON YOUR DEVICE... ex. make sure if your G3 or G4 btw read the link its provides the proper way...
from thailand
marek