Hi Guys,
i pointed out that if you have G4 you wont be able to bring it back to the original stand-so you will loose your warranty in any case if you update your G4 model with new ipl/spl cause so far i know there is no way to downgrade it again.You wont be able to install original Software until your device is CID locked and there is no solution for cid unlocking for G4 so far.
charliess said:
i pointed out that if you have G4 you wont be able to bring it back to the original stand-so you will loose your warranty in any case if you update your G4 model with new ipl/spl cause so far i know there is no way to downgrade it again.
Click to expand...
Click to collapse
Why to upgrade IPL/SPL ???
charliess said:
You wont be able to install original Software until your device is CID locked and there is no solution for cid unlocking for G4 so far.
Click to expand...
Click to collapse
There is no free CID unlock, it's different
And you be able to install original software but not able to install official Operating System from other country , really different.
you can flash any Rom you want without any CID unlocked, just you can't downgarde the SPL, so just remove the SPL from any rom, so you are the Newbie here, there was a lot of threads bout this, sorry
IPL SPL, the software that runs the hardware, it is like bios of the motherboard or firmware of any hardware, it is important to update them
paradis_pal said:
you can flash any Rom you want without any CID unlocked, just you can't downgarde the SPL, so just remove the SPL from any rom, so you are the Newbie here, there was a lot of threads bout this, sorry
IPL SPL, the software that runs the hardware, it is like bios of the motherboard or firmware of any hardware, it is important to update them
Click to expand...
Click to collapse
ähm sorry...but in any case -then tell me please how to get back the warranty it is not possible or?if you update ipl/spl what happens normally just by updating your os with the files you can download from here-gullums etc. then there is no way back to install the original updates from o2.Sure you can CID unlock for money- who wants that?i want it for free but there is no solution.So i started this thread juust to warn noObs not to update cause there is no way back without paying.got it? also i flashed my phone without ipl/spl i ve never said it doesnt work but i guess doing that wont give back warranty cause they also check ipl and spl and see that the device has been upgraded with some other versions->warranty gone.So instead of telling me what to post and saying that im the "dumb" you should bring solutions or simply not comment this thread-cause nobody could helped me with my problem i got no answers,so now to answer this thread is anything but not useful-sry guys my opinion
please check this http://forum.xda-developers.com/showthread.php?t=300356
if you missunderstand someting please ask me
paradis_pal said:
please check this http://forum.xda-developers.com/showthread.php?t=300356
if you missunderstand someting please ask me
Click to expand...
Click to collapse
thank you for this thread but i already know it,even it is possible to install the different os versions without CID lock by following steps in this thread you wont be able to use the updates provided on the O2 site and IPL / SPL is still different to the originial ones-i wanted to sell my phone i have 1 year warranty left but i guess it doenst matter-who would buy a prophet with warranty if O2 would say it as none,cause it has being modified and who would buy a prophet if you are not able to install original software without spending money for this or something like that.but thx for your help
online warranty, will check the SPL? is that what you mean?
you may wait for my solution to write SPL using pdocwrite,
IPL can be downgrade without any problem, only spl has the problem, and if you write the SPL using pdocwrite, and install all using nb2nbf it will be again your old phone
SPL has nothing to do with OS, if you just install os.nb and extention.nb, no one can check it online,
I think, you may download your o2 orginial rom, and extract the nb files, make new one without only SPL it will work and maybe the supports guys will not notice, it will be your phone again
untell I write how to write the SPL using pdocwrite, if you restore your old SPL even the HTC support can't notice you istalled other roms
I had 2 modified prophet back to warranty and they don't check the IPL/SPL stuff.... lol do you think they care about that ? And spend a tech to check dead devices for boot loaders ? no way
Maybe HTC do, but then they don't care anymore.
You just have to put your old rom back.... if you had back it up or are able to find a download that suits.
@paradis_pal: if I understood correctly, your solution will downgrade the IPL/SPL but with a higher version number to fake the protection, so it will still appear as modified
no, using pdocwrite will flash 2.20 again
and you misunderstood me, I was writing what charliess was thinking, I think no one will check the SPL as you wrote, if you read my first post in this thread you wouldn't misunderstood me
Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
does any one now how to lower the spl . when u start the ppc mine is 3.08 and i need it lower so i can unlock my phone
Well, my guess is that your phone is already unlocked if your SPL is 3.08.
Is is a G3 or G4 Wizard?
G3 But I Wont To Put Black Diamond On It
So just try to launch the setup for BD to know if it really isn't already unlocked (in case it is, the Rom will install, and if it isn't, then it just won't, so theres' no risk for your phone.
Ya It Says Like Bnf Error
So you just have to follow the Wiki:
http://forum.xda-developers.com/showthread.php?t=263116
i need to downgrade me spl first i no how to unlock it
So what? Can't you READ? Everything is written in there, including the way to downgrade.
Here is a link to the adequate Rom since you seem so lazy...
Good luck
http://c4software.another-team.com/wm5.0/Downgrade/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
lol im not lazy i have read so many tutorials on to unlock to phone
Just to forewarn you, do not install the downgrade ROM until you bring your IPL/SPL down from 3.08 to 2.xx. If you don't you may end up like a lot of other people on here where you can't upgrade the IPL after you get done unlocking your phone and go to install WM6. To get it down, just go to your service providers website and download their official version of their ROM and install it first and that should bring your IPL/SPL down to a 2.xx version, then flash the downgrade ROM.
xeno1 said:
Just to forewarn you, do not install the downgrade ROM until you bring your IPL/SPL down from 3.08 to 2.xx. If you don't you may end up like a lot of other people on here where you can't upgrade the IPL after you get done unlocking your phone and go to install WM6. To get it down, just go to your service providers website and download their official version of their ROM and install it first and that should bring your IPL/SPL down to a 2.xx version, then flash the downgrade ROM.
Click to expand...
Click to collapse
I did find one workaround that appears to almost always work is to have a minisd with a dumped raw image of a previous rom with ipl/spl included (r2d all command)...this was able to downgrade a phone on 3.08 back to 2.24 even after having gone to wm6. (it downgraded it back to wm5 at the same time)...conventional flashes were failing due to the ipl/spl.
ok thanks i will do that then i will unlock smart thinking
famewolf said:
I did find one workaround that appears to almost always work is to have a minisd with a dumped raw image of a previous rom with ipl/spl included (r2d all command)...this was able to downgrade a phone on 3.08 back to 2.24 even after having gone to wm6. (it downgraded it back to wm5 at the same time)...conventional flashes were failing due to the ipl/spl.
Click to expand...
Click to collapse
Yeah, downgrading your IPL/SPL is easy, it's when you go from a 3.xx IPL/SPL straight to a 1.xx IPL/SPL that can cause problems, like your IPL sticking at 1.01 afterwards and not wanting to upgrade back to a higher IPL.
YA but i cant find a downgrade for my spl
In the future, don't send private messages to people who haven't contributed to this thread. If you can't figure out how to downgrade and/or unlock your phone after reading the many, many threads on how to do it, I suggest sticking with WM5.
Here, run this. It's an IPL/SPL version only. It won't affect anything you info or programs you have loaded on your phone right now, all it will do is lower you back down to an IPL/SPL of 2.26.
ya that made me ipl 2.26 not my spl
That's not normal, try running it again. I think I just put a file that will change it to 2.25 in another post that you started. If the 2.26 one doesn't work after running it again, try the 2.25 one and see if it works for you.
Just install a factory T-Mo or Cingular ROM
(Gotta locate 1 yourself)
You'll lose all your info but you wanted to flash another Rom anyway.
You gotta keep a factory Rom handy when things go wrong
cujo did you just buy an 8125 because you think it looks cool or do you actually understand the phone? It seems to me like you should be using a razr or something less complex than that...
I followed Dr. Puttingham's thread and Yippie's thread to a tee in addition to reading threads in this forum for a good number of hours each day for two weeks. Yesterday, I became brave enough to downgrade my 2.26 Ipl / 2.26 spl; GSM 2.25.11; OS 2.26.10.2 MDA with a goal to upgrade to a custom WM6 rom with touchflo.
* Started with flashing the button rom then cid unlock with lockwiz2b which looked successful no errors but got a 1.xx IPL / 2.26 SPL since I got a 2.26 SPL then
* flashed the wizard love rom then then cid unlock with lockwiz2b which looked successful also but got the same results - a1.xx IPL / 2.26 SPL again then
* flashed the 2.26 T-mobile rom from the Tmobile website then
* flashed NBD 8.3 only to go back to Tmobile's 2.26 rom - DISAPPOINTED after two hours...............
Any assistance would be appreciated without bricking my MDA. Also, I read the thread on how to install a 2.x rom in a cid locked G3, this method appears a little bid complicated and if I need to move forward with this method, would this method work for any WM6 rom with touchflo and if somebody could simplify the method in layman's terms for newbie's like me could understand, please advice.
Let me know if I missed anything in the process.
Thanks, Technobuff
After u do cid unluck and sim unluck and its reboots do a downgrade again to the button rom and ur ipl and spl will change.(u do not have to re-due the onlucking procedure again)
I tried again performing Dr. Puttingham's CID unlocking process in terms of flashing the button rom then the CID unlock process using Lokowiz2b but while I am at the DOS screen trying to CID unlock my MDA it the DOS screen showed unlocking phone........DO NOT DISCONNECT UNTIL THE PHONE REBBOTS.
This process went on for 5 then 10 then past 30 minutes until I gave up. To be on the safe side I turned off the LAPTOP by taking the battery then pulled the USB cable from the PC to the MDA.
What is the typical timeframe for the unit to CID unlock? Why is is it hanging? Am I missing or skipping the process? How can I complete the process?
Any help would ber greatly appreciated by newbies who read threads.
Technobuff
The problem is that you need to have an IPL/SPL of 1.xx before you try to unlock your phone. CID unlocking will not change your SPL which means that you had an IPL of 1.xx and an SPL of 2.26 before you even tried to unlock. You need to reflash the button ROM over and over until your IPL and SPL both show 1.xx and then run lokiwiz.
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
unlock problem
if your device doesn't reboot almost at once after the unlock, it probably didn't work. That is what happened to me. Did you get four lines of File cannot be opened or a similar message? I got that from following the 17 steps carefully. What was wrong for me was unzipping to the root directory of C:/. When I redid it to the desktop and executed from there, no problemo.
Your symptoms sound exactly like mine. I posted a longer thread, somewhere....
LH
Ok i did a little booboo and yesterday was using equinoxe's softspl tool by mistake (didn't notice i had a g3), this causes you to actually end up with the exact same os you had before you flashed.
The best advice I can give: Open the Dr's guide and follow every step closely. (also just found this guide. Its a bit simpler http://forum.xda-developers.com/showthread.php?t=305225)
Once you CID unlock you should be able to use the RUUs to flash.
Make sure everytime you do any of the steps that dr. putt gives to be comepletely synced to activesync.
Also dont forget to load enablerapi.cab on your wizard.
Also you must use the unlock function before the cid unlock function in lokiwiz.
OH also the unlock will work after your ipl drops to 1.xx After you do the unlocks reflash button to drop the spl to 1.xx Then just flash up to a higher IPL/SPL as the Dr states.
If it seems unorganized im sorry =P
4irm said:
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
Click to expand...
Click to collapse
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
slod said:
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
Click to expand...
Click to collapse
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
thanks. helps me to learn stuff.
CID???
how wil i know if my fone mda vario is CID unlocked?
it is now installed with t-mobile 2.26 ROM
thanks.
rizortiz
famewolf said:
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
Click to expand...
Click to collapse
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
4irm said:
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
Click to expand...
Click to collapse
Perhaps they want it actually cid unlocked for resale value...or perhaps they prefer the RUU method of installs vs having to use shelltool.
Hi,
I purchased my TYTN-II from UK as sim free in Oct-07. From the last five months i was under the impression that HARDSPL is very much necessary for flashing. Though i never tried to HARDSPL my unit. Last month there was RUU upgrade from HTC e-club. Since it was from HTC and there was no special instruction before running RUU. So i run the RUU directly and my unit was successfully upgraded to WM 6.1.
After that i realised that 6.1 is not stable. So, with the help of the forum ... i downloaded the WM 6 shiped RUU from the forum and run directly and again my device accepted the WM6.
Now, i am confused that how this happened ? am i not suppose to HardSPL my device before flashing specially at downgrading level ?
OR since my device is SIM Free / Unlocked thats why it doesn't need HardSPL ?
I am just trying to educate myself nothing else ...
Regards
i believe that u still need to hard spl the right spl for that rom u installed...the spls are stickied in this forum
admins = plz shut this thread down...
I always thought it was normal for sim free phones.
I could just be thick. But I thought it was due to networks and simlocks that people had to HardSPL.
So its just for cooked ROMs. I get it now. So you flashed a HTC ROM on a HTC device. Which would have flashed the correct SPL anyway.
Hard SPL's allow you to flash cooked roms safely without bricking the device. Since you flashed an official rom from HTC you wouldn't require a modded SPL
There are different hard spl's for wm6.1 thats all. To be honest you are normally safer just to hardspl anyway. Back in the day, if you hadnt hard spl'd your phone and you bricked it, it was basically impossible to fix. Not sure these days on the kaiser, i have never tried not hard spl'ing mine so i couldnt say.
OEM SPL does NOT allow you to downgrade even if the ROM fits your device. I don't know why you not taking HardSPL, if you worry about the warranty, just go ahead to flash ROM with HardSPL, then flash OEM SPL back after it.
if you device is from HTC and not locked to a provider you can flash roms from HTC-E club BUT!!! your phone is not truly safe HardSPL is like a condom for your kaiser if something happens lets say the USB plug comes out while flashing NOT having HardSPL you might have an issue BUT you probably WILL... Just do yourself a favor and flash HardSPL you can always revert back to the shipped SPL if you need to for a warranty return......
austinsnyc said:
if you device is from HTC and not locked to a provider you can flash roms from HTC-E club BUT!!! your phone is not truly safe HardSPL is like a condom for your kaiser if something happens lets say the USB plug comes out while flashing NOT having HardSPL you might have an issue BUT you probably WILL... Just do yourself a favor and flash HardSPL you can always revert back to the shipped SPL if you need to for a warranty return......
Click to expand...
Click to collapse
Thanks austinsync,
It seems to me that i almost tried to kill my device. Now advice me which Hard SPL should i use for TYTN-II. I mean 3.28 or something else ?
They look like same to me ...
Regards,
What's wrong? I've tried different update files but they don't work
Please help,
I think I already wrote this on a wrong place!
Just to be sure, do you have a Kaiser?
Do you have HardSPL installed?
Follow these steps for ROM upgrading: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
DaveShaw said:
Just to be sure, do you have a Kaiser?
Do you have HardSPL installed?
Follow these steps for ROM upgrading: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
Click to expand...
Click to collapse
Thanks Dave,
In three color screen it says KSIS130 and then SPL_1.93.000, CPLD-8
In fact It's not a locked phone that belongs to any provider! How come I should Install another SPL?
mehrdadr said:
Thanks Dave,
In three color screen it says KSIS130 and then SPL_1.93.000, CPLD-8
In fact It's not a locked phone that belongs to any provider! How come I should Install another SPL?
Click to expand...
Click to collapse
Had to ask about the Kaiser, had someone with a Treo trying to use Kaiser Hard SPL the other day
You need to Flash one of the hard SPLs before you can flash ROM's from another carrier. The Hard Spls have the CID (carrier ID) check removed which allows this.
Thanks
Dave
DaveShaw said:
Had to ask about the Kaiser, had someone with a Treo trying to use Kaiser Hard SPL the other day
You need to Flash one of the hard SPLs before you can flash ROM's from another carrier. The Hard Spls have the CID (carrier ID) check removed which allows this.
Thanks
Dave
Click to expand...
Click to collapse
What I don't understand is that why my phone is locked? I first tried the HTC website update file, the some others from the links of XDA.
Sorry for stupid questions, I'm not really familiar with all these locking and bought my phone supposed to be without any lock! Could this be the agent of HTC desire?
mehrdadr said:
What I don't understand is that why my phone is locked? I first tried the HTC website update file, the some others from the links of XDA.
Sorry for stupid questions, I'm not really familiar with all these locking and bought my phone supposed to be without any lock! Could this be the agent of HTC desire?
Click to expand...
Click to collapse
All phones come CID locked, even the HTC ones, it means you can only flash ROM's made by the same manufacturer as the phone.
Your phone will probably be SIM unlocked meaning you can use any SIM card you like, but to flash a ROM with a different CID isn't possible without Hard SPL.
Ta
Dave
DaveShaw said:
All phones come CID locked, even the HTC ones, it means you can only flash ROM's made by the same manufacturer as the phone.
Your phone will probably be SIM unlocked meaning you can use any SIM card you like, but to flash a ROM with a different CID isn't possible without Hard SPL.
Ta
Dave
Click to expand...
Click to collapse
So the one I downloaded from their website must work right?
Yes it's SIM unlocked and works with everything.
I'm still looking for a proper time so that I can start operation on my phone! the big surgery
mehrdadr said:
So the one I downloaded from their website must work right?
Yes it's SIM unlocked and works with everything.
I'm still looking for a proper time so that I can start operation on my phone! the big surgery
Click to expand...
Click to collapse
Should do ...
Ta
Dave
Now confision,
It's just due to the low IQ I know
In fact I read different explanation for SPL and found that after I start with SSPL-KAIS.exe then I'll need to have the hard SPL.
What If I want one of the original ROMs from http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Do I need to extract the SPL from one of the original files on the mentioned link? If not Which hard SPL?
And then can I just run one of the WWE shipped .exe files or again the new ROM file must be extracted and being installed?
thanks
mehrdadr said:
It's just due to the low IQ I know
In fact I read different explanation for SPL and found that after I start with SSPL-KAIS.exe then I'll need to have the hard SPL.
What If I want one of the original ROMs from http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Do I need to extract the SPL from one of the original files on the mentioned link? If not Which hard SPL?
And then can I just run one of the WWE shipped .exe files or again the new ROM file must be extracted and being installed?
thanks
Click to expand...
Click to collapse
Actually, you dont need to do HardSPL or CID unlock for ROM upgrading,.
Those thing are used to make a smoother ROM (remove white screen, freeze, etc),.
When i have my TyTN at the second day, i flash to WM.6, and all works well,.
Make sure that you have download Kaiser ROM,.
make sure you dont have any corrupted download,.
ps: until now, my TyTN never been CID Unlocked,.
Garmin said:
Actually, you dont need to do HardSPL or CID unlock for ROM upgrading,.
Those thing are used to make a smoother ROM (remove white screen, freeze, etc),.
When i have my TyTN at the second day, i flash to WM.6, and all works well,.
Make sure that you have download Kaiser ROM,.
make sure you dont have any corrupted download,.
ps: until now, my TyTN never been CID Unlocked,.
Click to expand...
Click to collapse
No I'm even more and worse confused!!! I think Dave says that I need to Unlock the CID. However in some of the articles I think I read that to.
By the way none of the files I downloaded worked on my phone. Really I tried several, either from the HTC website or from XDA but same Invalid Vender ID comes to the PC displaye
mehrdadr said:
No I'm even more and worse confused!!! I think Dave says that I need to Unlock the CID. However in some of the articles I think I read that to.
By the way none of the files I downloaded worked on my phone. Really I tried several, either from the HTC website or from XDA but same Invalid Vender ID comes to the PC displaye
Click to expand...
Click to collapse
Just flash one of the hard SPL 3.* by Jockyw2001 and all should be OK.
Ta
Dave.