I just ran the official updater on my unlocked Cingular branded 750. I changed the values as stated (Brand to CNG - ATT didnt work) and now my phone wont connect to the carrier. It also doesnt see the SD card......help!
Ok.....moment of panic over...amazing what a soft reset will do
Well, I've updated few htcs before and everything went fine. But there's always the first time...
I upgraded my htc hd2 spl 1.42.0000 to hspl2, wanted to upgrade rom/radio too, but couldn't find any rom I do like, and then I got no more leisure to play with it. So there was only hspl2 replaced on the device and that's it. Everything was fine for a month or two, then suddenly the phone function stopped to work (couldn't register into network anymore). Wanted to send back to factory for repair, but to avoid warranty loss I wanted to downgrade the hspl to stock spl. Downloaded stock image at htc site (was 1.48.something), did everything exactly in a way described in the video tutor, and - got stuck on light gray "Loading..." screen after the colourful one, and nothing more. Tried to update ROM via activesync for test, got stuck at 0% and that's it (although the connection is fine), googled a lot, browsed a lot of xda-dev... still nothing useful found.
Technical info + what shows in the colourful screen:
Eastern Europe HTC HD2
PB81100 HX-BC
SPL-2.08.0000 8G XE
I would really appreciate if someone could tell me, what it is, and how to fix it!
Thank you in advance.
I believe when you did the original HSPL, you selected the wrong version. The SPLs that end with '.0000' are the stock ones. Assuming the HSPL was done correctly it should read "2.08.hspl". Try flashing HSPL again, this time select .hspl, then flash your ROM. Should be good to go.
Edit: When people say you need a stock SPL to send it in for warranty, Im not sure if you need the exact same one it came with or not. Because you basically just reflashed a stock one anyway, you might be able to just send it in for repairs as is, but Im not 100% on that.
donkeypunch85 said:
Try flashing HSPL again
Click to expand...
Click to collapse
Thanks for the tip and trick. Unfortunately, like I said this doesn't help, cause flashing doesn't work. Tried hspl2 and hspl3 as well. The screen turns 3-color, then gray "Loading..." like it was when flashing from sdcard, and stucking on it...
When installing hspl3, the software on the computer says (while having that "Loading..." screen on the phone):
CRITICAL ERROR
Flow: 00000001
Error code: 00000002
Description: USB Connect failed!
(although ActiveSync shows connected and sync/exploring runs fine)
I'm becoming really unhappy with this one.
What OS is on your PC? Are you making sure Anti-Virus is disabled before flashing? If Win7 right click on the HSPL and choose 'run as admin'. Your using a USB slot on the rear (main motherboard) of your PC and not one of the front ones right?
It suddenly started to work today. I have no idea, what happened, did the same steps as before. The GSM function is still broken, but now, as the flashing worked finally, I'm able to send it back for repair without a risk to lose warranty. Mystical.
Thanks anyway for your time and willing to help.
...had the same these days on an HD2 which I successfully up-/downgraded at least half a dozen times before.
Did the MTTY 29 thing (again, surely the 6th time, never had any problem before) and afterwards had the issue you describe.
What helped me was re-flashing the HardSPL. Afterwards all worked 'as usual'.
Hope that helps others, Franky
Ok
and if my usb plug is broken?
I can't flash from sd, because it stops on the 'loading...' screen. I even tried the gold card method and still stuck on 'loading...'.
Wat's even worse my current system is rather unstable and WM sees only 208mb of ram...
Any suggestions?
T-mobile HD2! Problem Flashing rom
Hi Guys,
I'm a new guy in this great site, because I bought a T-mobile HD2 recently, via china, and it's not a fake!!!
But I want to update its rom to put the android2.2 's system.
I have tried several methods find in this site. But during the rom's flash, my phone shutdown and the connexion between Pc and phone switch off.
The phone is only in sleep mode and not off.
Can you help me to resolve this problem?
My system :
Phone :
Not SPL on the bootloader (only tri color) and this message :
" Error :
Copying file from SD card failed.
The system will shut down"
OS : Windows mobile 6.5 Professionnel
Software version : DUMA.10X.W10.20.P29
Protocol Stack (software) version :
MAUI.09B.W10.16.MP.V5, 2010/06/07
Dual Sim, and no take off SD card storage
Rom version : v01.00
Rom Date : Sep 10 2010
Boot version 2010 08 01
PCB version v01
Model ID T8585 (Leo)
Manufacturer HTC
CPU QUALCOMM 8250B (1024 MHz)
Ram Size 576 Mb
Nand Size 1024 Mb
Data bus 32 bit
Memory CPU 194 Mo
Memory storage 385 Mo
Memory inside SD card storage 7362 Mo
PC :
OS Windows XP SP2
ActivSyn4.5 Ok, but not synchronization with outlook, but connexion between PC and phone is OK.
Use update Rom Flash : Rom T-mobile v3.14 (run OK, no problem until progress bar (phone in sleep mode).
I tried SD card's method, unless sucess.
I used qmax to find SD card's number. But the memory's value is 3,5 Gb and not 7,3G.
Well, I think, I have forgot anything!
Thanks for your help!
Best regard
If you can get to the bootloader (four color stripes) then do so and then connect the phone to the PC. Wait until word 'serial' changes to 'USB'. Then start update on the PC (normally click the _RUU_(...).exe and follow the steps).
If fails please write at what point.
htc hd2
tomus said:
If you can get to the bootloader (four color stripes) then do so and then connect the phone to the PC. Wait until word 'serial' changes to 'USB'. Then start update on the PC (normally click the _RUU_(...).exe and follow the steps).
If fails please write at what point.
Click to expand...
Click to collapse
it fails at 8%.
Hello, mates!
Today I've made hard reset. After that my phone stopped recognizing any sim-cards. It writes that sim card isn't inserted. I've tried 3 sim cards without any success. All of this sim-cards work just fine in another phone.
I've already tried to do one more hard reset. And I've already tried to take sim card from the phone and boot it without card. It wasn't helpful.
Have you got any ideas?
Sim module is connected to the maniboard with the help of flex cable.It may be partiarlly dissconected.
I've already checked it twice... It's conected, I'm sure.
p.s.: flashlight is working great.
Have you tried to reflash rom?
No, I haven't. I tried to download 7.0.7389 ROM that you've uploaded, but I still can't download it.
Can you give me some advice where can I get 7008 or earlier build, or re-upload 7389 to another file srver?
I found many ROMs for other HTC devices, but not for "7 PRO".
http://rapidshare.com/files/4546556....64.09.20_22.42.50.15_Signed_GOLD_RELEASE.exe
Ok, downloading it. But do you have any links to 7008 or earlier builds? I don't want to lose jailbreak...
Unfortunately,for HTC 7 PRO there are no older build available.
oops... RUU updater says that it can't connect to device, code 260.
And I unable to unlock it through Chevron WP7. It says that my device probably PIN-locked or Zune is switched off. Both are turned on.
I tried to do soft & hard reset my phone. And I tried to reboot PC. Hopefully that problem due to using Windows 7 through Virtual machine. I use Mac OS...
Tomorrow I will be able to test it at work, on a real PC with Win 7. I hope it would be a solution.
You can switch HTC 7 PRO to bootloader manualy,connect to PC, then run the exe ROM
Ok, I'm in SPL now, but when I mount it to PC there is no driver and there is sign at the white strip "Serial". I suppose that it should be changed to "USB" when I connect device to PC. But it is doesn't occur.
Got it. Trying to update.
Strange behaviour. I updated the device to 7389. I unable to update it through Zune to 7390 - no update available.
Upd: connected device to Win 7 notebook, installed Zune, and here was an update to 7390.
But the most terrible thing that my sim-card still can't be recognized...
I have an htc hd7, mango 7.5.
I downloaded an ran the wpdevicemanager.
Now my phone is bricked.
I get SIM CARD READ ERROR.
I had no issues before I ran the manager, and it never seemed to actually open up.
What can i do?
I have upgraded phone to lollipop and then the sim card is detected, but not showing network.
I have tried everything which i was able to get on internet,
1. I have installed the stock rom of cm11 via downgrade process
2. check the sim slots
3. tried restarting it multiple times
4. clear cache and data
5. installed stock rom multiple times
6. It is showing imei so no chance of that imei error
7. *#*#4636#*#* and tried shifting it to gsm only and everything
8. entered in safe mode and checked that any 3rd party apps are not causing this problem...
Any one know the solution please help.... Is there any flash file for it? because i am not getting it on internet.