Related
Hi !! I was previously using WM2005 1.60c and ActiveSync 4.1. Everything was ok until I upgraded to WM2005 1.65b. Everytime I try to sync, my Windows XP crashed.
I downgraded to WM2005 1.60c again and everything worked fine. Any idea ?
It happend to me but you must know the name of the file which cause it
when xp crach in the blue screen the name of the file will appear for me it was klick.exe and other time klif.exe after searching the net about this i discovered that kasper sky antivirus did this so there is two ways
first uninstall kaspersky ... not garanteed
second upgrad it
i hope thats will help
otherwise try to find the name of the file and google it
goodluck
I don't have kaspersky but I have norton. During the bluescreen. It didn't give me any filename. That's the problem.
I tried the latest WM2005 rom. Version 2.0 ...it still failed. I wonder why .
hi
i hope you fix it from that time
if not
try to disable protiction to network attack
goodluck
hi friends,
i am a software and hardware developer in istanbul , Turkey
i have a O2 XdaII with 1 gb sdram ,
rom : 1.72.00
ext: 1.72.187
radio: 1.17.00
i tried to upgrade my old phone to wm 2005.. but..
first of all i found different types of roms , ext, radios..
i have
WM2003SE 2.06.00WWE XDA2
Wm2k5 1.65b.96WWE
2.06.100a SG Extended ROM
Radio1.18
Radio_XDAII_v1.18
ROM_XDAII_v1.60a.WWE_WM5
WindowsMobile2003SE_XDA2_2.20.00CHS-translated
Xda_II_172187_Final.exe
Xda_II_172181_Final.exe
Xda_II_Extended_16052.exe
active sync 3.8
active sync 4.0
active sync 4.1.0 (build 4841)
hex editors
xda2unlock.exe
and all other crap HTC64, himaupgradeut_noID and etc..
i tried all of the roms, exts, radios all other f#!*ing stuff..
everytime it takes more then 30 minutes..
at the end of every bios updates.. the activesync sometimes gave errors:
* the usb device could not be recognized.
* generic usb mobile device
* this usb device malfunctioned
* connecting... (and tries more then 4 hours and still connecting)
* found usb device (but not recognized)
* found ethernet device (what?)
and so on..
when i tried to install the updater provided by o2 , it works quite good. but it is 2003..
when tried 2003se then it did not work in Turkcell operator..
when tried 2.06 rom then the bluetooth crashed..
when tried 2003se xda2 2.20.00 CHS then it worked but again the activesync crashed..
when tried combination of the o2 provided ext and wm5 rom it worked! yes.. but again i could not install any application to the phone.. because the activesync again could not connect it..
i tried all activesync versions.. even i installed different winxp versions on my computer.. i tried media center edition 2005 and all other (maybe the activesync has problems), i used different language options.
i tried different computers (maybe the activesync doesnt like my computer.. maybe it have emotion, sensation who knows.. )
i wrote a program to reverse the data going out between pc and phone on usb..
i decode activesync and disassembe it but could not found why it is making like that..
sometimes my xda crashed and
at the end, i tear out my hairs..
i became insane..
at last.. now i have radio 1.12 , rom 1.60c wm5, ext 1.72.187
working .. but sometimes.. sometimes not..
when i change the usb port it works..
is there any stable solution to install wm5 on xdaII without having trouble with activesync?
and is there any Turkish language set (other then the mobilera company provided) ?
thanks..
PS: it i will not find any solution in 1 week.. then i will turn back to my Sony Ericsson P910i phone..
also that f*$#ing phone's support site closed the upgrade process..
you can enter the update service site but , you can not update your phone..
(maybe i shell try to breed tomato.. and build a farm.. forget about software development)
I´m sorry of of your bad experiences with w2k5, but my XDA works really fine with windows 2005! I use the latest version of buzzdev.net, which is the 1.65.b or something like that, and I have to say that everything is ok with my sd wifi card, with my 1giga sd card, and with telephone uses...
Maybe, the unique thing to comment is that one week ago, I soft reseted my XDAII, and then the screen was not aligned... AS you know the align proccess it´s only available after a hard reset, or in settings menu. So I had to enter the security numer tryin´ and tryin´the inside out numbers... Finally, after an aother asoft reset, the screen was aligned again...
73´s
i have the 1.65.c version..
can you please look the version you have?
and does the activesync works well?
thanks
Yap, Activesync runs good. The version is: 1.65b.96 WWE.
You can download in buzzdev.net
73´s
at last i solved the problem..
if you install ext rom .. no matter the bios rom version is..
the activesync is not working..
if you just install wm5.x.x version and the radio rom (anyone) and after the update if you press record and camera button while hard reset (power button and reset same time) . a menu appears with 3 options.
the selection order is no,yes,yes ..
after all.. thats all..
the activesync works well..
i tried 4 different roms and it worked..
now i have 1.70a rom..
but whatelse i am missing with not to install the ext rom?
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
Hello,
I have a big problem and I hope you can help me.
A few weeks ago I want to update my Treo to WM6.5 and use a Rom (I think from navenedrob) which was timebombed (since there I don't know it).
Now I want to update my Treo to the right version from this thead :
http://forum.xda-developers.com/showthread.php?t=541417
but when I start the update with the cheathunlocker tool, it stops at 7%, the usb connection get lost and my Treo make a restart and the old bimebomed version is there...and the tool says, that the file is curuppted and i should check my update tool... but this message comes every time also with other roms.. When I use the method with the media button there comes the colored screen with "serial" and nothing happens.
(The sd card is okay and the same card which I use to install the timebombed version)
What should I do? I can't do anything... Please help me
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
4. if it does not help - try to install 6.0 rom from palm .
Hello
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
I tried this very often... But nothing helps
Where I can get this Rom? On the plam homepage I can't find a Rom, only instructions and a download for Mobile center.
http://rapidshare.com/files/173145556/Treo750_2.23_ROW_WM6.rar
For England (750V) :
http://www.megaupload.com/?d=PS2QHTE6
Oh really thank you for the Roms!
But I have a problem, my Treo dosn't connect to my Pc. When I click to my workplace there isn't a hhd from the Treo.. and the Mobile Center show me, that there i no connection... I have Windows 7, under Windows Vista it don't work too...
Because of that I can't update my Treo.
Do you know the problem and how to solve it?
Really big thank you, this here is a nice community where I get help!!
1. try to install from WINXP - look for another computer...
2. there is a way to get the rom from the file - maybe with winrar- I'm not sure but I remember something like it...
3. look for a rom 6.1 and try to install it from the card.
Okay I try it under Windows Xp, but I get no connection
I get the Rom from the .exe file by 7zip and copy it to the sd card, but the same problem is there at 7%
Do you have maybe am link from Wm6.1?
I think all this dosn't work.. I don't know what the problem is..
What other possibility can I try? There must be a solution for it...
a link to 6.1
http://www.mediafire.com/?4gxsdxh1tmm
maybe you need to replace your card...
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
the "serial" problem happened to me too. It was because bad rom file or bad card.
Okay today I try it with an other Card and 2 Roms (also the orginal Rom), but in the bootloader modus there is every time the "serial" and below..
Palm Tr
IPL-0.20
PalmTr
SPL-0.24.0000
Serial
And when I try it with the cheetahunlocker, it stops at 7% and my Treo make a restart and the old timebombed version is loading..
But maybe my sd card slot is broken from my Treo or the sd card adapter...
because when I run the cheetahunlocker without an sd card, it also stops at 7%...
any idea to check this? Or an other way?
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!
1. Format sd card to fat32
2. find the .nbh file in the stock ROMS
3. rename it CHEEIMG.nbh
4. copy it to the sd (make sure it is not hcsd or it won't work)
5. insert the card in the card reader
6. reset the phone by using the stylus and the reset button next to the card reader, at the same time hold the PTT button on the left side of the phone, (this will put it bootloader mode)
7. when prompted, press the end talk button on the phone, this should start the update process without using activesync.
HardSpl
1. redownload the app and extract using 7zip
2. make sure you have .NET compact framework 3.5 installed on the PC and the phone
3. in CHEETAH unlocker press ctrl+2 and click the header (this will unlock all three options)
4. follow steps
The radio it flashes will not be a good one, so you need to search around to get the right one. Once those steps are complete, you should be able to reflash WM 6.5 without any problems. If you download Navendrob's ROM, you will need to download the arcsoft mms composer to make mms work, and you should be good to go.
Hi backspacepc,
thank you for your help!!!Now it works.. I didn't rename the file. so this was the problem
Hi,
I have a question about this rom. (Wm6.5 from naevendrob)
My touch is broken, so I can't use the touch. Now I have the problem, that I only end a call with touching "end" and not with the normal hang up button on my keybord.
My second problem is, that I can't lock my Treo, because when I want to unlock it, I have to use the touch display.. On Wm 6.1 I could turn my screen with the hang key on my keyboard off.. this is now on this Rom not possible, or do anybody have a solution for this? Maybe in the registry or something?
Thank you
Has nobody a anser?
Speedkazze said:
Has nobody a anser?
Click to expand...
Click to collapse
Since your issue is with the ROM you loaded & your hardware problem, you should bring it up at the specific thread where you downloaded the ROM from.
I would recommend getting the touch screen fixed or roll back to WM6.0.
No it's a Problem with my Treo. I change the touchscreen one time and it works for a while, but after maybe 2 months the touch dosn't work.
Can anybody maybe write a file that i can use the hang up button to hang up without the touchscreen?Or has anyone an idea to change it maybe in the registy or sth. like that?
Speedkazze said:
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
Click to expand...
Click to collapse
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
juancamaney69 said:
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
Click to expand...
Click to collapse
HardSPL the phone first, then it should work.