Database Info

Cant connet to Activesync on WM5 with USB

hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?

Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.

ok, will have a try.. thx so much :wink:

link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist

Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !

i got same problems right now, any one help us please

I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks

Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!

ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.

ROM in XDA mini corrupted--HELP!!

i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.

Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M

sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.

http://wiki.xda-developers.com/index.php?pagename=HTC_Magician

thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc

taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M

hi all, pls help me

I just got an I-mate JAM with following info:
ROM version: 1010.00 WWE
ROM date: 08/18/05
Radio ver: 1013.00
Protocol: 1337.43
ExtROM ver: 1.12.550 WWE
RAM: 64MB
Flash: 64MB
Model No: PM10A
Platform: PocketPC
which ROM that i should use now?
and can I do it without USB cable? (copy ROM to MMC and install)
I'm living in Vietnam and use English

Welcome to XDA-developers!
Your ROM version is fine, however you may wish to upgrade to the latest 1.13 ROM + 1.13 Radio + BigStorage (by the way, BigStorage is just a way in which you can extend your measly 7MB of Storage to 27MB). However you will need a USB cable for the above method: I highly recommend to invest in one anyway, as you will find installing many programs onto your JAM difficult without one.
I think it is possible to upgrade with just a SD/MMC card and a SD/MMC reader for your computer, however it is considerably more complicated and you will not be able to back up your existing ROM, as you will need your computer to command your JAM during the backup process. You will probably need to merge two upgrading methods in order to get a USB cable-free process, something that no one else has done. Sorry I don't quite have the time for that yet, but maybe someone else can come to your aid!
Is there a technical reason you can't use a USB cable by the way?
EDIT: I forgot this: the reason why you cannot upgrade by just dumping a ROM onto the SD card and letting the JAM upgrade from that is that the ROM must be modified with some special, device unique data from your JAM first before your JAM will accept it. The normal ROM upgrade programs do this via USB by retrieving the device data from your JAM and then applying it to the ROM they are about to send to it. While there is a way to manually get this required data, that too requires a USB cable (see http://forum.xda-developers.com/showthread.php?t=231410).

haaaaalp
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected

buddy28s said:
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Click to expand...
Click to collapse
Please avoid cross-posting, especially since this is the wrong forum. I can't help you anyway - different models of PDA can have very different ways of doing things.

toomuchdogfur said:
Welcome to XDA-developers!
Your ROM version is fine, however you may wish to upgrade to the latest 1.13 ROM + 1.13 Radio + BigStorage (by the way, BigStorage is just a way in which you can extend your measly 7MB of Storage to 27MB). However you will need a USB cable for the above method: I highly recommend to invest in one anyway, as you will find installing many programs onto your JAM difficult without one.
I think it is possible to upgrade with just a SD/MMC card and a SD/MMC reader for your computer, however it is considerably more complicated and you will not be able to back up your existing ROM, as you will need your computer to command your JAM during the backup process. You will probably need to merge two upgrading methods in order to get a USB cable-free process, something that no one else has done. Sorry I don't quite have the time for that yet, but maybe someone else can come to your aid!
Is there a technical reason you can't use a USB cable by the way?
EDIT: I forgot this: the reason why you cannot upgrade by just dumping a ROM onto the SD card and letting the JAM upgrade from that is that the ROM must be modified with some special, device unique data from your JAM first before your JAM will accept it. The normal ROM upgrade programs do this via USB by retrieving the device data from your JAM and then applying it to the ROM they are about to send to it. While there is a way to manually get this required data, that too requires a USB cable (see http://forum.xda-developers.com/showthread.php?t=231410).
Click to expand...
Click to collapse
Thanks for your help, i'll try and tell u the result.

Anyone with Helmi Cooked Rom able to connect their Blackberry Connect?

I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)

yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...

I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?

paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.

I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?

paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...

paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.

w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.

Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.

tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know

w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.

By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.

Problems flashing cooked WM6 ROM

Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!

Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...

OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks

Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance

you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help

Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers