i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
Related
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help
hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (
do not use olydb
just when the healthy ppc restarted replace it with zick quickly.
use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..
What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Download the File again..
then got first to tricolor(fourcolor -screen) and then plug in the USB Cable.
Last start the ROM Update Utility and go through the assistent
But next time, please make a thread like this, in the Kaiser-Section (Kaiser = TyTN II)
AND PLEASE DON´T TAKE SOME COOKED ROM FROM OUT OF HERE!!! You First have to install HardSPL by POF!!!
Hi PDA gurus,
I am a newbie dont know much about PDA phones,
I have Dopod 818Pro, and want to upgrade it to wm5 to wm6
Pls help me to upgrade it as i dont know,
I have checked the website also www.dopodasia.com, but its not working its showing the weird search page,
and my mobile get restart itself, when it has the battery 25% and dont get log on untill i put on charge
Thanks
Ankur
Hi there,
I would suggest you go hunt around in the forum as your queries has been repeated.
Maybe you would like to try these few steps. (Must have ActiveSync installed)
1. Search in this forum for roms (WM 6.0, WM 6.1, WM 6.5)
2. Download SOFTSPL (search in this forum)
3. Extract the files and put it to root of your phone (next to windows folder)
4. Run SPL.ink from your prophet (Using File Explorer)
5. Screen should turn white
6. Extract the files from the ROM package you downloaded at Step 1.
7. Run ROM update file.
8. Once done, phone will reboot and viola ~
9. A new OS is running in your prophet
Hi Sunset,
I have roamed around the other post also , but not be able to understand.
your 1st step : u r talking about the wm6 download (exe)
2nd step: what is SOFTSPL (need to download 1st in phone)
3rd: which root folder u r talking about
4th: where i can find the SPL.ink
6th: need to run the exe from i have downloaded in phn at step 1?
7th where i will find the ROM updated file
sorry , I dont have any idea of these things, Pls explain me it would be better for me and post a link for step1 and 2
http://forum.xda-developers.com/showthread.php?t=405384
the thread explains it quite well
The Wiki is your guide
Always try the wiki first and read two three times what the methods say and follow slowly that should help you on most of the things mate.
That still fails for Imate Jammin G3
I tried those steps for Imate Jammin G3
After the screen turns white, i run the G3 UPDATEEXE from the computer.
It fails as it couldnt connect.
When i remove and plug back the usb cable from the phone i hear the sound - which indicates the connecitivity.
I have to do soft reset to start the Windows Mobile again
Note : i am trying to Upgrade WM 5.0 to WM 6.1
Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!
Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...
OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks
Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance
you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help
Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers
hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.
I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!
I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.
this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.
almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.
The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him
Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys