Database Info

Summary of the USB MaUpgradeUt.exe methold of ROM Upgrade

While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
1. Backup your pocket pc using Sprite Backup and backup your original ROM using the SD card method http://forum.xda-developers.com/viewtopic.php?t=19500&sid=446b03c5f2a384e62c7905557ddcb450 .
2. Download the appropriate “shipped-rom.exe” file, such as ftp://xda:[email protected]/MA_DANG_WWE_10600_115_10500_SHIP.exe . DO NOT run it directly.
3. Right click to use winzip (or winrar) to unzip all the files into a directory of your choice.
4. Download MaUpgradeUt_noID.exe from http://www.ce4you.cz/forums/downloa...les/forums/cz/0000053752/MaUpgradeUt_noID.exe and save it in the same directory.
5. Disable USB in ActiveSync.
6. Set your ppc to bootloader mode (keep pressing both camera and on/off switches while resetting).
7. Connect pocket pc through USB.
8. Run MaUpgradeUt_noID.exe on your PC.
9. Don't get panic when the screen of your pocket pc goes dark. Use a torch and you can see the wording "USB ....".
10. On completion, hard reset your ppc (keep pressing on/off switch while resetting).
Follow-up Procedure:
1. After hard reset, you may choose to skip the installation of the Extended ROM files (especially the Default_Patch_bthusb.CAB file which might cause occasional bluetooth malfunction) by soft resetting the ppc, after the screen alignment routine and before the "in 3 seconds" message disappears.
2. You can re-install the splash screen of your choice by downloading the appropriate cab file. ftp://xda:[email protected]/Magician/Splash Screens/
3. You might have to re-install all softwares one-by-one, unless you are experienced in using the advanced features of Sprite Backup.
4. Copy the appropriate autoconfig files to get the right GPRS settings. For example, if you use CSL1010 in Hong Kong, download from ftp://xda:[email protected]/Magician/Extended-roms/O2_Mini_HK_Chinese/ : 11O_ALL_CHT_103170.sa.CAB, CAB-Customization-Magician-O2Asia1010-06Jan05.CAB, and AutoConfig.txt into the windows directory of ppc and run autoconfig.

very clear guide but how do i unzip the MA_DANG.......SHIP.exe file it says no archives found ? :?

dont unZIP them; if youre using winzip forget about it. get yourselfwinrar, right click on exe and 'extract to...' and youre done man!
regards,
Quappo

i followed your instructions..however when i run MaUpgradeUt_noID.exe it states "checking the information on your device" and thats it. it doesnt do a thing. any advice?

Topazworm said:
i followed your instructions..however when i run MaUpgradeUt_noID.exe it states "checking the information on your device" and thats it. it doesnt do a thing. any advice?
Click to expand...
Click to collapse
the same here...
ik looks like my downgrade (yes, a downgrade from iMate 1.06 to 1.03) starts and after 30 seconds it says it's ready, but notting happend!

Re: Summary of the USB MaUpgradeUt.exe methold of ROM Upgrad
Talents said:
While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
.....
5. Disable USB in ActiveSync.
.....
Click to expand...
Click to collapse
How can I disable USB in ActiveSync?????????????
Tnks,
Ale
Click to expand...
Click to collapse

Re: Summary of the USB MaUpgradeUt.exe methold of ROM Upgrad
AX3L said:
Talents said:
While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
.....
5. Disable USB in ActiveSync.
.....
Click to expand...
Click to collapse
How can I disable USB in ActiveSync?????????????
Tnks,
Ale
Click to expand...
Click to collapse
under connection settings, just uncheck allow USB connection,
Click to expand...
Click to collapse

ROM in XDA mini corrupted--HELP!!

i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.

Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M

sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.

http://wiki.xda-developers.com/index.php?pagename=HTC_Magician

thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc

taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M

Problem with HardSPL

Dear all,
Does anyone can help me with hardSPL software ?
I would like to change my ROM with the Shaps 's one...
So after having read severals topics it seems that a hardSPL is needed to unlock the current ROM.
So I have followed a tuto found on a french forum to unlock the ROM using HardSPL software.
All is running apparently well... until I have the screen with tri-color with USB wrote. Then I unplugged -replugged my TYTN II... consequence I loose the activesync connectivity... I tape ENTER.. then program is starting and is asking to have activesync connectivity for the rest of the procedure.
PS : At this stage by TYTN II appearance is still tri-color screen with USB wrote (no way to do anything on TYTN II at this moment)
My problem is that I am unable to have activesync connectivity again... I have wait for 5 or 10 minutes without success.
After severals attemps I decided to continue the program by typing NEXT... result is hardSPL is successfull.... but in the program result he doesn't give me any info on current ROM (as it is maybe supposed to provide apparently) !
Question : Is this result normal... does hardSPL worked well even if the activesync icon did not come green back ? Can I launch Shaps' s ROM installation ?
PS 2 : In case I launch Shaps 's ROM instalation on my TYTN II without having done correctly the hardSPL... does this action can break my TYTN II ?
Many thanks in advance for your help/answer.
@+ Tjojo.

you are supposed to run it wiht the activesync icon greyed out.
put your device into bootloader and if it says olipof there, then hardspl is done

XtreMe_G said:
you are supposed to run it wiht the activesync icon greyed out.
put your device into bootloader and if it says olipof there, then hardspl is done
Click to expand...
Click to collapse
Hello XtreMe_G,
many thanks for this quick answer...
Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?
Once again Mthks.
@+ Tjojo.

Tjojo said:
Hello XtreMe_G,
many thanks for this quick answer...
Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?
Once again Mthks.
@+ Tjojo.
Click to expand...
Click to collapse
i'm sorry but i really do not get what you are trying to say.
just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly

XtreMe_G said:
i'm sorry but i really do not get what you are trying to say.
just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly
Click to expand...
Click to collapse
Oki... just did it..
So I have Tricolor screen.... with
KAIS130
SPL-1.56.0000
CPLD-8
Serial
Does it means it did not work
@+ Tjojo.

1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.
hope this helps...

Zaf said:
1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.
hope this helps...
Click to expand...
Click to collapse
Hello Zaf,
Mthks for this tuto... I will try it tonight when I will be at home.. currently at work without being able to close firewall & antivirus.
Thks.
@+ Tjojo.

HardSPL error
HI,
somebody help me please?
I had one TyTnII
Radio 1.27.15.32
Protocol Version: 22.51.88.13H
I try to cid unlock, but when a run HardSPL, the application show me one error: Errorcode = -2146893818, something about: invalid assign
The same thing happend when I try to install googlemaps for example.
My sim is unlock.
Have you any idea for help me?
Thanks.

Lost data recovery

Hi all,
During synchronising my HTC Hermes 300 (T-mobile MDA Vario II) with PC I lost an important excel file. The empty folder on the laptop overwrote the PDA.
Is there any possibility to recover this file?
1. Is there any PPC recovery software for this?
2. Is there any software that makes it possible to see my PDA as a drive? (own memory of the PDA, not the extended memory card.) This would also help as I could use the recovery software on my PC and check the PDA as I check a drive.
thanks

you can use nueMassStorage and scan your rom using Active Recovery 7

Thanks for your quick reply. I try to do it but I have got a small problem with using nueMassStorage When I install it, USB - PC disappears from Start - Setting - Connection, so I cannot set it to MassStorage.
I restarted the PDA many times, but nothing changed. After removing MassStorage, USB - PC comes back.
How to go on?

Cannot upgrade my Imate Jamin to Windows mobile 6.1

I tried the several methods mentioned
I have copied the SPL files on to the root and \windows directory
-Executed the JumpSPL.exe
-shows the white screen
-Unplugged the USB and Plugged back - And i hear the sound as well
-Then tried to run the G3 rom update utilitiy too.
- Application crashes on Desktop [Win 7] while verifying the information
I have to do a soft reset to come back
I tried to run upgrade package utility as well - Stil FAILS.
In this method i tried to inject the Rom - more than 10 mb and that fails.
Can someone help me , Desperatley want to see Wm6