Database Info

XDA Zinc reflash help

Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA

hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help

hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (

do not use olydb
just when the healthy ppc restarted replace it with zick quickly.

use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..

What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!

Problem with HardSPL

Dear all,
Does anyone can help me with hardSPL software ?
I would like to change my ROM with the Shaps 's one...
So after having read severals topics it seems that a hardSPL is needed to unlock the current ROM.
So I have followed a tuto found on a french forum to unlock the ROM using HardSPL software.
All is running apparently well... until I have the screen with tri-color with USB wrote. Then I unplugged -replugged my TYTN II... consequence I loose the activesync connectivity... I tape ENTER.. then program is starting and is asking to have activesync connectivity for the rest of the procedure.
PS : At this stage by TYTN II appearance is still tri-color screen with USB wrote (no way to do anything on TYTN II at this moment)
My problem is that I am unable to have activesync connectivity again... I have wait for 5 or 10 minutes without success.
After severals attemps I decided to continue the program by typing NEXT... result is hardSPL is successfull.... but in the program result he doesn't give me any info on current ROM (as it is maybe supposed to provide apparently) !
Question : Is this result normal... does hardSPL worked well even if the activesync icon did not come green back ? Can I launch Shaps' s ROM installation ?
PS 2 : In case I launch Shaps 's ROM instalation on my TYTN II without having done correctly the hardSPL... does this action can break my TYTN II ?
Many thanks in advance for your help/answer.
@+ Tjojo.

you are supposed to run it wiht the activesync icon greyed out.
put your device into bootloader and if it says olipof there, then hardspl is done

XtreMe_G said:
you are supposed to run it wiht the activesync icon greyed out.
put your device into bootloader and if it says olipof there, then hardspl is done
Click to expand...
Click to collapse
Hello XtreMe_G,
many thanks for this quick answer...
Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?
Once again Mthks.
@+ Tjojo.

Tjojo said:
Hello XtreMe_G,
many thanks for this quick answer...
Question : I did the HardSPL yesterday night... does this operation is limited in time... or can I check this day putting my device in bootloader to verify ?
Once again Mthks.
@+ Tjojo.
Click to expand...
Click to collapse
i'm sorry but i really do not get what you are trying to say.
just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly

XtreMe_G said:
i'm sorry but i really do not get what you are trying to say.
just put your device in bootloader mode, and if it says olipof there, that means you did do the hardspl correctly
Click to expand...
Click to collapse
Oki... just did it..
So I have Tricolor screen.... with
KAIS130
SPL-1.56.0000
CPLD-8
Serial
Does it means it did not work
@+ Tjojo.

1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.
hope this helps...

Zaf said:
1. power down your Tilt and remove sd card and sim card
2. connect Tilt to laptop or pc via USB cable.
1. open "Mobile Device" folder via "Explore" button on ActiveSync.
2. copy JumpSPL1.56-KAIS.exe to the directory that it opens up to. Mine says "Mobile Device". That will be your "My Documents" directory on your Tilt.
3. use file explorer on Tilt to navigate to "My Documents" directory. Keep hitting "up" till you cant go any farther. The directory should be there.
4. Open "My Documents" and run JumpSPL1.56-KAIS.exe
5. after a few seconds "USB" appears on the display
6. unplug and uncheck the option allow usb connections from microsoft activesync file connection settings replug the usb cable.
7. run KaiserCustomRUU.exe from the flash-hardSPL directory on your laptop or pc. again Tilt will reset.
8. flash rom.
hope this helps...
Click to expand...
Click to collapse
Hello Zaf,
Mthks for this tuto... I will try it tonight when I will be at home.. currently at work without being able to close firewall & antivirus.
Thks.
@+ Tjojo.

HardSPL error
HI,
somebody help me please?
I had one TyTnII
Radio 1.27.15.32
Protocol Version: 22.51.88.13H
I try to cid unlock, but when a run HardSPL, the application show me one error: Errorcode = -2146893818, something about: invalid assign
The same thing happend when I try to install googlemaps for example.
My sim is unlock.
Have you any idea for help me?
Thanks.

WM6.1 problem..

Hello,
I upgraded my Kaiser 130 from Wm6 to Wm6.1 forseveral times, but at the end I restored Wm6.0, because I have never been pleased about Wm6.1.
Whenever I tried WM6.1, My device got freezed, or touch screen sensitivity decreased while in use, so I had to tap screen firmly sometimes.
I had HardSPL v1.0, is this the cause forsuch freezings or other problems? Should I flash higher HardSpls? Please help in this subject..
I want to use Wm6.1. But, after flashing My rom to Wm6.1, I restore back to Wm6.0..
Thanks in advance..
Best Regards.

Is not there any expert to help me?
what is my problem? why can't I get the best performance for Wm6.1 with my kaiser..

Still waiting for a logical reply,
aren't there any expert? Rom cookers?
Thanks in advance..

If you followed the noobs guide to flash to a T & then found the ROM you wanted and read the chef notes, then read fixes etc, should be fine.
Please be patient, i probably would have posted more if you was not bumping the way you are.....

lol good reasoning stylez
I would recommend upgrading your HardSPL, like this:
a. Download the Kaiser-HardSPL-3.29.zip from here and
extract them to a folder on your computer, for example: HardSPL.
b. Now download this file and
extract it to a folder on your computer, for example: JumpSPL.
c. Open the folder you extracted it to, and copy "kaiser_JumpSPL_pof_v1.nb"
and "JumpSPL.exe" (no quotes) to your device.
d. Power down your device, take out your SIM and SD card (if one),
then power back on the device. If it opens an emergency call screen
once restarting, just click the red End key button on your device to
exit and go to the today screen.
e. Open File Explorer, then open JumpSPL.exe on your device, then enter in: "0x00000000" no quotes, and then select kaiser_JumpSPL_pof_v1.nb
f. Now, if done correctly, you should be at a Tri-color screen and
it should say "USB".
g. Now disable USB connections in Activesync/Windows Mobile Device
Center. To do this, click on settings under Activesync or Windows
Mobile Device Center (depending on if you're running Vista or XP) and
UNcheck "Allow USB connections"
h. Unplug your device, wait 5-20 seconds, then plug your device back in.
i. Remember that folder that you extracted the SPL to? Well, on your
computer, open that folder, then run KaiserCustomRUU.exe.
j. Click Next, Next, then Update. Wait for it to finish, then click Finish.
k. Congratulations! If done correctly, you should have HardSPL flashed
on your device. To confirm this, press and hold the camera button on your
device all the way while pushing the stylus into the reset hole. You should
be at a tri-clor screen (called the bootloader). The second line down should
say "SPL-versionhere.Hard" (no quotes). If it does, you're ready to flash!
If it doesn't, please re-read all instructions.
good luck

mbarvian said:
lol good reasoning stylez
I would recommend upgrading your HardSPL, like this:
a. Download the Kaiser-HardSPL-3.29.zip from here and
extract them to a folder on your computer, for example: HardSPL.
b. Now download this file and
extract it to a folder on your computer, for example: JumpSPL.
c. Open the folder you extracted it to, and copy "kaiser_JumpSPL_pof_v1.nb"
and "JumpSPL.exe" (no quotes) to your device.
d. Power down your device, take out your SIM and SD card (if one),
then power back on the device. If it opens an emergency call screen
once restarting, just click the red End key button on your device to
exit and go to the today screen.
e. Open File Explorer, then open JumpSPL.exe on your device, then enter in: "0x00000000" no quotes, and then select kaiser_JumpSPL_pof_v1.nb
f. Now, if done correctly, you should be at a Tri-color screen and
it should say "USB".
g. Now disable USB connections in Activesync/Windows Mobile Device
Center. To do this, click on settings under Activesync or Windows
Mobile Device Center (depending on if you're running Vista or XP) and
UNcheck "Allow USB connections"
h. Unplug your device, wait 5-20 seconds, then plug your device back in.
i. Remember that folder that you extracted the SPL to? Well, on your
computer, open that folder, then run KaiserCustomRUU.exe.
j. Click Next, Next, then Update. Wait for it to finish, then click Finish.
k. Congratulations! If done correctly, you should have HardSPL flashed
on your device. To confirm this, press and hold the camera button on your
device all the way while pushing the stylus into the reset hole. You should
be at a tri-clor screen (called the bootloader). The second line down should
say "SPL-versionhere.Hard" (no quotes). If it does, you're ready to flash!
If it doesn't, please re-read all instructions.
good luck
Click to expand...
Click to collapse
Thank you mbarvian I flashed my Hard SPL, And checked it by pushing Reset&Camera button, it is 3.29.
So can you say that this is the most important cause of the freezings or decreasings in touch screen sensitivity in WM6.1? If I flash Wm6.1 rom, do these problems appear?
Thanks in advance.

stylez said:
If you followed the noobs guide to flash to a T & then found the ROM you wanted and read the chef notes, then read fixes etc, should be fine.
Please be patient, i probably would have posted more if you was not bumping the way you are.....
Click to expand...
Click to collapse
Thank you expert, but I say that, I got such problems even if I flash my device with official Wm6.1 ROMs..
Thanks again..

Clarifications Needed: for a VIDEO GUIDE version of HOW TO FLASH A ROM...

I've been working on a step-by-step CLOSE-UP VIDEO guide to Flashing a ROM, including how to HARD SPL, to make available to users here. Here are things I'm still not clear on.
(These were posted recently to the Guide written by mskip in the Kaiser forums. He answered some questions, but these are still unanswered. )
Flashing via ActiveSync with USB Lead
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
Click to expand...
Click to collapse
** When is this step necessary & required (whether during initial HARD SPL or FLashing a ROM post-HardSPL) , as opposed to simply "Best Pratices"? What is this step accomplishing?
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
Click to expand...
Click to collapse
** Please explain #9, what it is accomplishing & thus why recommended?
"Active Sync" vs "USB connection"
Please tell me if this is accurate or not:
(1)When installing via PC vs installing via Storage Card: After data has been backed up to PC by way of "Active Sync", thereafter, when performing any ROM updates (HardSPL or flashing a new ROM) the app "Active Sync" is technically no longer involved in the flashing process, but rather, what's necessary is simply having a USB connection from device to PC, correct? Is the distinction that Actice Sync can foul up the basic data connection from phone to PC necessary to flash a ROM. I want to be very clear. Is this accurate?
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Microsoft ActiveSync icon will now have a red cross in it and the program will say "Connection Disabled"
12. Run the ••••••RUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT reenable USB Connections in Activesync*
Click to expand...
Click to collapse
** same as above: Are these just more compensations in order to disable MS's incorrect assumption that the insertion of a USB cable always equals "launch an Active Sync session" ?
15. Unplug USB cable from phone then REPLACE SIM & SD CARDS !!
**Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash**
Click to expand...
Click to collapse
Why, exactly, is it required to unplug the USB cable? Is it, again, a "Best Practices" precaution to prevent any kind of accidental read/write of data?
A few questions re entering Bootloader mode, various scenarios:
1. In some older guides, even for when flashing a rom to phone device from your PC , sometimes a step is specified to "enter Bootloader mode by holding & pressing the xxxx and xxx keys on your phone, and then xxxxx".
2. But if you have an RUU folder that includes the Bootloader.exe app, along with the RUU.exe and .nbh file, then by running the RUU.exe app, the entering bootloader mode is handled automatically, sending the commands to phone, which automatically place the phone into the tri-color screen mode? -- as opposed to one having to manually press xxxx and yyyy on phone to enter bootloader mode? Correct or not?
3. If correct: then, does it matter on which screen or in which mode your phone is currently on in order to begin the flash-ROM process? Could I just as well be on a Total Commander app screen or on a TouchFlo Today screen?
4. Some guide-writers recommend users hard reset their phones before starting a new flash-rom session, just for "best practices". Others consider this superfluous & irrelevant, and what matters most is a Hard-Reset be run immediately AFTER flashing a new ROM. ... Any opinion on this?
Flashing Via ActiveSync
<snip; this is deep into the flashing process >
2. Turn phone back on and wait until it syncs with your PC
Click to expand...
Click to collapse
** Would it be more accurate to say here "until your PC confirms it has a USB connection to your phone"? (You're not looking to run a sync session, but rather just getting a USB connection for files to be transferred from PC to phone.) I think the term "Active Sync" often creates more confusion than helpfulness in this whole realm of moving files from PC to phone. )
Question re RUU.exe file on PC:
From what I have seen in the ROMS I have used in years 2008-2009, the extracted ROM folders I've downloaded from the chefs have typically all had the file " Bootloader.exe " within the RUU folders, and that (in the case of mskip's Flash Guide for Kaisers) KaiserCustomRUU.exe calls the Bootloader.exe app which sets the phone into bootloader mode from the PC, without one needing to manually set the phone into bootloader mode.
But this is your response from your initial quick-reply, which confuses me"
The customRUU automatically puts the phone in bootloader mode thus there is no need for the seperate file (bootloader.exe).
Click to expand...
Click to collapse
** This confuses me. I am principally trying to distinguish between when one needs to manually set phone into bootloader mode -- and when this step is handled by the PC's RUU.exe process. In the older (around year 2007) "How to flash" guides, users were often told they needed to create a folder, make sure they have the correct RUU.exe file inside it, make sure they have the correct .nbh file, make sure they don't have files that are there for those with soft SPL phone, etc. And as far as I can recall, in those older Guides, this bootloader.exe file was not included. And thus users were instructed to manually put their phones into bootloader mode...
The difference being that for the past year or more, chefs currently are now providing the whole contents of the RUU folder in the .rar file, so that if you've hard-SPL'd, then that .rar file has eveything you need, and all you need to do is launch the RUU.exe -- never having to set your phone manually into bootloader mode.
Yet you are saying
Quote:
thus there is no need for the seperate file.
Click to expand...
Click to collapse
I'm not a coder, but I don't get this. Why would bootloader.exe be inside practically every RUU Folder nowadays if it were unnecessary to set the phone into bootloader mode to initiate the flashing process? You were saying the RUU.exe app itself would contain some method of setting phone inot bootloader mode without even needing that bootloader app present in the folder.
Could someone please clarify.
And secondly: Does it matter one bit of difference which screen your phone is on when you commence with running RUU.exe ?
And third : If users happen to be confused, and think they must manually set their phone into bootloader mode, as part of running RUU.exe, and they do manually set their phone inot bootloader mode and get the tri-color screen: Does that conflict with or hamper in any way the running of the RUU.exe program from the PC? Or does the RUU process just simply proceed, and send an "enter bootloader mode" instruction to the phone, which then causes the phone, already in tri-color screen, to be reset again into bootloader mode (and there is no problem that the phone was already in bootloader mode) ?
After New Rom is Completely Installed and You Have Customized Your Phone:
** I think it in dutty's guide where he says "after customizing your phone, power down your phone, then power it back up". Is this power-down/ power-up cycle equivalent to just doing a soft-reset? What is the difference as it pertains to that specific step after customization?
Quote:
Flashing Via MicroSD Card
<snip>
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to your MicroSD Card
Click to expand...
Click to collapse
** Where does one get the correct 4-LETTER CODE for their phone if one has a DIFFERENT phone than Kaiser and wants to flash via MicroSD card?
-----
Thanks to anyone who can please clarify these points

2. Removing the battery is not required in any level of flashing a ROM. removing the battery for Hard-SPLing is not required on all devices. For instance, my polaris doesn't require removing the battery.
9. Not sure why you need to do that but it IS necessary (you can pm Olipro about it) but i'm pretty sure it has to do with updating the connection between the PC and the PDA since while in Bootloader the PDA doesn't act as a plug-and-play device.
11. I don't recall this being an important step as I flashed hard-spls and roms without changing the AS state. you HAVE to have an activesync connection with your PC in order to flash (doesn't have to be synced, but the PDA has to be recognized by activesync, hope this is clear).
15. Yes, it is not a MUST. you can flash roms and spls while leaving the cable connected.
---------------------------------------------------------------------------------------------------
2. Yes, if you have the full library containing bootloader and everything you can flash without entering bootloader manually prior to flashing.
3. flashing doesn't require a specific state. you can start the process whenever.
4. Hard-reseting before MIGHT make a difference... in some cases which i'm not familiar with. maybe there's an app which can disturb the flashing process.
Hard-reseting after is pointless as flashing a rom performs exactly that WHILE switching the OS.
-about the syncing.. yeah, you don't need an actual sync-session. a usb connection is enough (AS LONG AS the comp identifies the hardware of course)
-it doesn't matter if you have the bootloader.exe file inside or not (I assume it depends on your device as well.. but not sure). RUU runs bootloader automatically. about HARD-SPL.. yeah, i haven't seen a hard-spl which doesn't contain bootloader.exe.. (i again suggest you pm olipro about this)
-again, it doesn't matter which screen you're on when running the ruu
...
-about the phone codes for flashing... you can find all codes for all phones in the forum
for instance,
Polaris -> POLAIMG.nbh
Hermes -> HERMIMG.nbh
Blackstore -> BLACIMG.nbh
Diamond -> DIAMIMG.nbh
Raphael -> RAPHIMG.nbh
Trinity -> TRINIMG.nbh
yada yada...
you can search, and i'm pretty sure not ALL devices have this option..
the wifi also contains info about flashing from SD card.
also, wonderful initiative and i hope you will agree to post this in the GUIDES thread.

[Q] Windows mobile 6.5 upgrade HTC Touch diamond

hello friends,
I have HTC Touch Diamond(P3490) having windows mobile 6.1. i want to upgrade to 6.5 officially no updates are available.i tried roms on xda but not working. can anubody help me please.........

Simple installation Windows Mobile 6.5 DiamondTouch
Hi,
1: First download this ROM from here BsB 6.5.1G: Direct Download or view full post and look this ROM HERE
2: Download this RAR from here UpdateTools6.5-DiamondTouch.rar
3: Extract this rar, put your downloaded rom into RUU_UpdateTool folder
4: Make connection, Active Sync option using Windows Mobile Device Center or
ActiveSync (WinXP)
5: Go to folder RUU-HSPL, start Custom_RUU.exe and follow instructions
6: After restart connect again using Windows Mobile Device Center or
ActiveSync
7: Go to folder RUU_UpdateTool, start Custom_RUU.exe and follow instructions,
don't forget to copy your downloaded rom into this folder.
Note!: You must have 50%+ batery power to start flashing process.
With this instructions you can do perfect and safe installation of all roms.
If you whant other rom to flash, delete old rom from RUU_UpdateTool folder and paste new rom there and start process again.
If you got some error or broken installation with new rom and you can't start your OS again, just power on your device, press and hold volume button Down + Reset button simultaneously, when red/blue/white screen appears, connect your usb and start process 7: again or with new rom there.
Look This site and Try manu more ROMs available for your HTC http://all-cooked.blogspot.com/
I suggest This ROM, this rom is good and stable:
http://rapidshare.com/files/279817225/Satus_Windows_Phone_6.5_ROM_Upgrade.rar
Full post HERE
If you using iGO8-Amigo navigation, install TouchFLO Deatacher for more free ram.

Lot of thanks
Thank you for short and clear instructions.
Only this ROM and utility works for my Touch diamond

finally i've updated my rom!!!!!
n m very happy!!1

Hi
I got a problem while updating my Touch Diamond..
I followed untill "5.",
5: Go to folder RUU-HSPL, start Custom_RUU.exe and follow instructions"
But then, My phone shows Seek bar.. it doesn't go towards from "0%"
and i got an "Error [262]" UPDATE ERROR
It says there is a communication error
How can i update my diamond...? Please help me...
Thank you.
Kasun.
---------- Post added at 05:24 AM ---------- Previous post was at 04:51 AM ----------
truekasun said:
Hi
I got a problem while updating my Touch Diamond..
I followed untill "5.",
5: Go to folder RUU-HSPL, start Custom_RUU.exe and follow instructions"
But then, My phone shows Seek bar.. it doesn't go towards from "0%"
and i got an "Error [262]" UPDATE ERROR
It says there is a communication error
How can i update my diamond...? Please help me...
Thank you.
Kasun.
Click to expand...
Click to collapse
Well, I fixed this by myown... Thank you all here...

Hi Kausan
Please tell how you solve this?
Thanks in advance.

blackzerors said:
Hi,
1: First download this ROM from here BsB 6.5.1G: Direct Download or view full post and look this ROM HERE
2: Download this RAR from here UpdateTools6.5-DiamondTouch.rar
3: Extract this rar, put your downloaded rom into RUU_UpdateTool folder
4: Make connection, Active Sync option using Windows Mobile Device Center or
ActiveSync (WinXP)
5: Go to folder RUU-HSPL, start Custom_RUU.exe and follow instructions
6: After restart connect again using Windows Mobile Device Center or
ActiveSync
7: Go to folder RUU_UpdateTool, start Custom_RUU.exe and follow instructions,
don't forget to copy your downloaded rom into this folder.
Note!: You must have 50%+ batery power to start flashing process.
With this instructions you can do perfect and safe installation of all roms.
If you whant other rom to flash, delete old rom from RUU_UpdateTool folder and paste new rom there and start process again.
If you got some error or broken installation with new rom and you can't start your OS again, just power on your device, press and hold volume button Down + Reset button simultaneously, when red/blue/white screen appears, connect your usb and start process 7: again or with new rom there.
Look This site and Try manu more ROMs available for your HTC http://all-cooked.blogspot.com/
I suggest This ROM, this rom is good and stable:
http://rapidshare.com/files/279817225/Satus_Windows_Phone_6.5_ROM_Upgrade.rar
Full post HERE
If you using iGO8-Amigo navigation, install TouchFLO Deatacher for more free ram.
Click to expand...
Click to collapse
i'm unable to download the rom :/

I cant download
2: Download this RAR from here UpdateTools6.5-DiamondTouch.rar
Has anyone this file for me or can it upload again. Would be nice. THX
Duke

But How Tell Me ??

ImranSheikh5 said:
But How Tell Me ??
Click to expand...
Click to collapse
what do you want to know? :/

problem in htc
my fone is attacked by virus i think..it cant install any app(cab)..it is showing "installation was uncessful"
i downloaded upgrade tool to 6.5
i want to install it pls help me
thanks..