I tried the several methods mentioned
I have copied the SPL files on to the root and \windows directory
-Executed the JumpSPL.exe
-shows the white screen
-Unplugged the USB and Plugged back - And i hear the sound as well
-Then tried to run the G3 rom update utilitiy too.
- Application crashes on Desktop [Win 7] while verifying the information
I have to do a soft reset to come back
I tried to run upgrade package utility as well - Stil FAILS.
In this method i tried to inject the Rom - more than 10 mb and that fails.
Can someone help me , Desperatley want to see Wm6
Related
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
I'm trying to upgrade my I-mate Jamin (G3)
I followed this guide :
http://forum.xda-developers.com/showthread.php?t=310452
The first 5 steps went successful, and I've tried installing multiple ROM's like :
Transformer 1.1
Touch VII
and both ROMs are giving me same error on command prompt ( although in the end it comes as successful upgrade ) and this popup of "SUCCESS" comes on my device while upgrading.
the error i'm getting on command prompt i'm getting is :
Writing the new CrossBow OS Rom ...
Copying C:\Downlo~2\itsutils.dll to WEC:\windows\ItsUtils.dll
could not update Itsutils.dll to the current version, maybe it is inuse ?
try restarting your device, or your active sync.
then that Congratulations msg comes up ~~
I hard reset my device and I'm still on Windows mobile 5
I'm a NOB please help .. tell me what I'm doing wrong ??
Thx.
-Download again all the .zip's from web to the desktop and extract all to desktop again
-disable antivirus and firewall
-run pvtemp.exe(choosse between g3 and g4 depending of your mobile model)
then run the update.bat
it works with me
I think i'm a bigger noob
i didnt unlock CID anyways figured it out .. just installed Transformers 1.1
thx
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help
hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (
do not use olydb
just when the healthy ppc restarted replace it with zick quickly.
use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..
What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!
Hi there!
I just tried to install Cotullas WM6.1 ROM on my Magician (MDA Compact, Radio 1.12), as it didn't work on Vista I used XP. Entering bootloader mode was no problem, but on the second page of Update.exe I get an overview:
Your device software is about to update from:
[Nothing in here]
To:
[Nothing either]
However the upgrade completed on the PC without an error message, but I got no "100% Upgrade OS Image Complete" message on my device an after a reset there's still WM2003se on it.
What's the problem and how can I fix it?
seems you have no USB connection between device and PC.
you should check it. check if you see on device screen "USB\n\n\n\n\n1.0X"
Yes, the device in Bootloader mode shows "Serial v1.0.2" an when I connect it via the cable Serial changes to USB. My guess would be that Update.exe checks the wrong port. But even if the phone is not connected at all the update finishes without error.
Is Active Sync needed for an upgrade?
Where did you extracted the ROM?
Can you try to extract on the desktop and don't put in any folder and then flash the ROM.
it's on my desktop in the folder "HTCMAG_ROM_WWE_O3", copying files directly on the desktop didn't change a thing
UPDATE: Installing Active Sync solved the problem
yes you need install Active Sync for drivers.
is there previous your ROM 2.03TX?
is that TRUE meaning you couldn't upgrade to anything else! 2.03TX is bad rom!!!
It was no problem with the upgrading-process itself, it was simply that the program didn't find the phone but showed no error message. Might have something to do with a newer driver ActiveSync installed or just some registry values the update-tool needed.
Hi PDA gurus,
I am a newbie dont know much about PDA phones,
I have Dopod 818Pro, and want to upgrade it to wm5 to wm6
Pls help me to upgrade it as i dont know,
I have checked the website also www.dopodasia.com, but its not working its showing the weird search page,
and my mobile get restart itself, when it has the battery 25% and dont get log on untill i put on charge
Thanks
Ankur
Hi there,
I would suggest you go hunt around in the forum as your queries has been repeated.
Maybe you would like to try these few steps. (Must have ActiveSync installed)
1. Search in this forum for roms (WM 6.0, WM 6.1, WM 6.5)
2. Download SOFTSPL (search in this forum)
3. Extract the files and put it to root of your phone (next to windows folder)
4. Run SPL.ink from your prophet (Using File Explorer)
5. Screen should turn white
6. Extract the files from the ROM package you downloaded at Step 1.
7. Run ROM update file.
8. Once done, phone will reboot and viola ~
9. A new OS is running in your prophet
Hi Sunset,
I have roamed around the other post also , but not be able to understand.
your 1st step : u r talking about the wm6 download (exe)
2nd step: what is SOFTSPL (need to download 1st in phone)
3rd: which root folder u r talking about
4th: where i can find the SPL.ink
6th: need to run the exe from i have downloaded in phn at step 1?
7th where i will find the ROM updated file
sorry , I dont have any idea of these things, Pls explain me it would be better for me and post a link for step1 and 2
http://forum.xda-developers.com/showthread.php?t=405384
the thread explains it quite well
The Wiki is your guide
Always try the wiki first and read two three times what the methods say and follow slowly that should help you on most of the things mate.
That still fails for Imate Jammin G3
I tried those steps for Imate Jammin G3
After the screen turns white, i run the G3 UPDATEEXE from the computer.
It fails as it couldnt connect.
When i remove and plug back the usb cable from the phone i hear the sound - which indicates the connecitivity.
I have to do soft reset to start the Windows Mobile again
Note : i am trying to Upgrade WM 5.0 to WM 6.1