I'm trying to upgrade my I-mate Jamin (G3)
I followed this guide :
http://forum.xda-developers.com/showthread.php?t=310452
The first 5 steps went successful, and I've tried installing multiple ROM's like :
Transformer 1.1
Touch VII
and both ROMs are giving me same error on command prompt ( although in the end it comes as successful upgrade ) and this popup of "SUCCESS" comes on my device while upgrading.
the error i'm getting on command prompt i'm getting is :
Writing the new CrossBow OS Rom ...
Copying C:\Downlo~2\itsutils.dll to WEC:\windows\ItsUtils.dll
could not update Itsutils.dll to the current version, maybe it is inuse ?
try restarting your device, or your active sync.
then that Congratulations msg comes up ~~
I hard reset my device and I'm still on Windows mobile 5
I'm a NOB please help .. tell me what I'm doing wrong ??
Thx.
-Download again all the .zip's from web to the desktop and extract all to desktop again
-disable antivirus and firewall
-run pvtemp.exe(choosse between g3 and g4 depending of your mobile model)
then run the update.bat
it works with me
I think i'm a bigger noob
i didnt unlock CID anyways figured it out .. just installed Transformers 1.1
thx
Related
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
hi everyone!
I've tried running the following to unlock my SDA that I recently purchased- SDA_ApplicationUnlock.exe, HTCUnlock-CVS.exe a post here, I still get the same error- '...is an unsigned windows CE application'
I am able to run SDA_ApplicationUnlock on my computer and after getting the message 'SDA successfully unlocked...PLEASE REBOOT SDA NOW', I reboot, but still get the same '..unsigned windows CE appl' error everytime i try installing anything on the SDA.
Any solutions to this issue plz???...any help will be much apprreciated!
Thank you!
Did you do the registry edits first?
when you run the htcunlock cvs there is a program that is created on your phone on the startmenu in the accesories folder named htc unlock... just run it then restart...
SORRY: wrong titel!! translation: upgrade to WM6 using Windows VISTA!!
Hi!
i am a newbe but i informed me since 1 week and so i want to give WM6 a chance.
i am trying to upgrade my qtek s200(HTC prophet) G4 to WM6 smartv1.3.
first of all i am using the following helps:
http://forum.xda-developers.com/showthread.php?t=308755
i try do us:
RUU_Prophet_220734_2207114_024721_NVID
to upgrade my mda. but i get always the same error:
ERROR [248~260] : UPDATE ERROR
by using the readme.txt i can only find the following info: pls restart mda and pc. i did both but i still get this error
i guess its because i use vista and i jump over the step : install active sync 4.5 (this is not possible in vista)
has any one an idea or has someone experience upgrading his htc prophet from WM5 to WM6 on WINDOWS VISTA?
thanks for help!!
flo
P.S.: i tried di kill all process including deactivating firewall and viren scanner. i also tried to close the securite center (is not possible)
nothing helped!
P.P.S.: i searched in google and i found out, that some people have successfully upgraded their mda on vista(but it was an other device)
P.P.P.S.: i also found an RUU on http://205er.de/ppc.htm but he confused me. he uses also a s200 device BUT the RUU is not for s200 (i am guessing, because their is another picture at the upgrade routine )
please yous forums search ... you can found a lot of hits her!!
**** sorry netrunner
if possible delete this thread please!
for everyone who has the same problem..
try this:
http://www.modaco.com/index.php?showtopic=252977
but i noticed, that it doesn't work for everyone!
if this happens also to you
FORMAT C: DELETE this **** vista... nothing works anymore on this OS except the graphical stuff
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Download the File again..
then got first to tricolor(fourcolor -screen) and then plug in the USB Cable.
Last start the ROM Update Utility and go through the assistent
But next time, please make a thread like this, in the Kaiser-Section (Kaiser = TyTN II)
AND PLEASE DON´T TAKE SOME COOKED ROM FROM OUT OF HERE!!! You First have to install HardSPL by POF!!!
Hello,
I have just upgraded my treo750v with 2.27. I have strictly followed the process and everything goes well even replications.
The only issue is the fact that I can't activate anymore my phone. When I try, device tells me : "A problem has occured with device.exe / please tell Microsoft about this problem....".
Other issue is that when I want to recover following your process, I find the folder but there is no T750URT.exe nor any other file.
Hereafter my configuration :
Windows XP SP2
Activsync 4.5.0 build 5096
phone id : Can't give as each time I want to get it, I have the waiting icon then "A problem has occured with device.exe / please tell Microsoft about this problem...."
Memory free : 36MB
Can you someone help me ? Even send tell me how to get a former SW with WM5.
Thanks in advance,
perform the upgrade again using the SD version (or extracted cheeimg_fw.nbh from updater) and KaiserCustomRUU.exe (search for file and how-to).
Then run UpdInfo.CAB (extracted from updater) to set version to 2.27
Hi,
Tks for the steps
For SD update it is OK.
I can't find anything clear enough for Kaisercustommruu.exe.
Issue solved
In fact, issue was coming from a wrong installation. I consequently unzip the download file (treo 750.....device installer) with winzip (can also with winrar) then launch T750URT.exe.
The recovery tool launch a new instal and everything goes well now.
In all cases, tks for your help and this great forum which teaches me a lot of things on my Treo 750.
Excellent, glad you figured it out!
The gist with KRUU.exe is to rename the file from "cheeimg" to "RUU_signed"