SORRY: wrong titel!! translation: upgrade to WM6 using Windows VISTA!!
Hi!
i am a newbe but i informed me since 1 week and so i want to give WM6 a chance.
i am trying to upgrade my qtek s200(HTC prophet) G4 to WM6 smartv1.3.
first of all i am using the following helps:
http://forum.xda-developers.com/showthread.php?t=308755
i try do us:
RUU_Prophet_220734_2207114_024721_NVID
to upgrade my mda. but i get always the same error:
ERROR [248~260] : UPDATE ERROR
by using the readme.txt i can only find the following info: pls restart mda and pc. i did both but i still get this error
i guess its because i use vista and i jump over the step : install active sync 4.5 (this is not possible in vista)
has any one an idea or has someone experience upgrading his htc prophet from WM5 to WM6 on WINDOWS VISTA?
thanks for help!!
flo
P.S.: i tried di kill all process including deactivating firewall and viren scanner. i also tried to close the securite center (is not possible)
nothing helped!
P.P.S.: i searched in google and i found out, that some people have successfully upgraded their mda on vista(but it was an other device)
P.P.P.S.: i also found an RUU on http://205er.de/ppc.htm but he confused me. he uses also a s200 device BUT the RUU is not for s200 (i am guessing, because their is another picture at the upgrade routine )
please yous forums search ... you can found a lot of hits her!!
**** sorry netrunner
if possible delete this thread please!
for everyone who has the same problem..
try this:
http://www.modaco.com/index.php?showtopic=252977
but i noticed, that it doesn't work for everyone!
if this happens also to you
FORMAT C: DELETE this **** vista... nothing works anymore on this OS except the graphical stuff
Related
Dear users
Following wiki upgrading procedure, I have upgraded my MDA compact to 1.12 WWE. But Camera is not working, not even starting!.
Nor I can find Camera Link in programms. It looks like camera.cab is missing or bad installing, from extROM
Can someone help?
Where can I download a camera.cab?
Thanks and waiting
Simon
try this..
nonentity,
can i still that .cab file on my Alpine device???
i think shouldn't have any probs... it is just a software base... as long as you're running on windows mobile... but no promises...
I tried but still failed!
I tried but still failed!
from your suggested link I downloaded your suggested
Camera.CAB
But then nothing changed, only I got -album- application, which before was not there.
Simptoms:
when I push CAMERA button, it looks like "camera" is starting, but then after 2-3 ecs, it ABORTS
Please help
Simone
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
I'm trying to upgrade my I-mate Jamin (G3)
I followed this guide :
http://forum.xda-developers.com/showthread.php?t=310452
The first 5 steps went successful, and I've tried installing multiple ROM's like :
Transformer 1.1
Touch VII
and both ROMs are giving me same error on command prompt ( although in the end it comes as successful upgrade ) and this popup of "SUCCESS" comes on my device while upgrading.
the error i'm getting on command prompt i'm getting is :
Writing the new CrossBow OS Rom ...
Copying C:\Downlo~2\itsutils.dll to WEC:\windows\ItsUtils.dll
could not update Itsutils.dll to the current version, maybe it is inuse ?
try restarting your device, or your active sync.
then that Congratulations msg comes up ~~
I hard reset my device and I'm still on Windows mobile 5
I'm a NOB please help .. tell me what I'm doing wrong ??
Thx.
-Download again all the .zip's from web to the desktop and extract all to desktop again
-disable antivirus and firewall
-run pvtemp.exe(choosse between g3 and g4 depending of your mobile model)
then run the update.bat
it works with me
I think i'm a bigger noob
i didnt unlock CID anyways figured it out .. just installed Transformers 1.1
thx
Hi PDA gurus,
I am a newbie dont know much about PDA phones,
I have Dopod 818Pro, and want to upgrade it to wm5 to wm6
Pls help me to upgrade it as i dont know,
I have checked the website also www.dopodasia.com, but its not working its showing the weird search page,
and my mobile get restart itself, when it has the battery 25% and dont get log on untill i put on charge
Thanks
Ankur
Hi there,
I would suggest you go hunt around in the forum as your queries has been repeated.
Maybe you would like to try these few steps. (Must have ActiveSync installed)
1. Search in this forum for roms (WM 6.0, WM 6.1, WM 6.5)
2. Download SOFTSPL (search in this forum)
3. Extract the files and put it to root of your phone (next to windows folder)
4. Run SPL.ink from your prophet (Using File Explorer)
5. Screen should turn white
6. Extract the files from the ROM package you downloaded at Step 1.
7. Run ROM update file.
8. Once done, phone will reboot and viola ~
9. A new OS is running in your prophet
Hi Sunset,
I have roamed around the other post also , but not be able to understand.
your 1st step : u r talking about the wm6 download (exe)
2nd step: what is SOFTSPL (need to download 1st in phone)
3rd: which root folder u r talking about
4th: where i can find the SPL.ink
6th: need to run the exe from i have downloaded in phn at step 1?
7th where i will find the ROM updated file
sorry , I dont have any idea of these things, Pls explain me it would be better for me and post a link for step1 and 2
http://forum.xda-developers.com/showthread.php?t=405384
the thread explains it quite well
The Wiki is your guide
Always try the wiki first and read two three times what the methods say and follow slowly that should help you on most of the things mate.
That still fails for Imate Jammin G3
I tried those steps for Imate Jammin G3
After the screen turns white, i run the G3 UPDATEEXE from the computer.
It fails as it couldnt connect.
When i remove and plug back the usb cable from the phone i hear the sound - which indicates the connecitivity.
I have to do soft reset to start the Windows Mobile again
Note : i am trying to Upgrade WM 5.0 to WM 6.1
Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!
Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...
OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks
Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance
you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help
Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers