Hi all,
I am following the steps described in the forum.
I have unlock the universal and follow all the steps (i think so)
In my Universal appears the bootleader with the USB when the USB is connected and serial when not. In the PC i have unchecked the usb connection in the ActiveSync etc... But when i run in the PC the "ROMUpgradeUt" program provided with the cooked ROM package it seems that is not communicating properly with the Universal. First of all when it appers the screen that informs you about the current version of the pda and the upgrade to perform, both fields are empty, Then i click in "next" button and after a while (that informs you that the process could take 20 minutes) it appears some error regarding to the connection (i guess)...
More info: No USB HUB but Windows Xp running on wmware, but the Active Sync works perfectly on vmware.
Please could you help me ?
Thanks!
Er.....
I would first update your bootloader to: 2.01
Then i would check if your uni if connecting to the VMware copy of XP,
another opition you could do if partion your hard-drive nad load XP on to it...
OK Thanks!
But i don't find the bootloader version that you point... i have downloaded the one i have from the main thread of ROM Upgrade... could someone put the link?
thanks
Hi again,
My bootloader version is 1.0 so it is a G3, anyway, Can i update it to WM6 or not ?
Thanks in advance
you should bew able to,
Arr yes, hgave u SPLed ur uni?
i updated my bootloader about last year you my best optinion is to pm Orb3000 and ask for his help
Hi!
Thanks a lot for your comments. Problem solved... i didn't reboot winxp after ActiveSynd installation.... (it seems that was the problem). Right now all is perfect!
Cheers
Related
hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?
Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.
ok, will have a try.. thx so much :wink:
link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist
Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !
i got same problems right now, any one help us please
I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks
Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!
ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.
i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M
Dear All
I still cannot upgrade from WMM2003se to WM205 ROM 2.01 64MB!
I downloaded ROMs from
http://buzzdev.net/component/option,com_frontpage/Itemid,1/
I get error 101
Can you please provide detailed upgrade istructions?
I have downloaded XDA_WM2k5_2.01a32WWE and XDA_WM2k5_2.01a64WWE and XDA_WM2k5_2.01a00WWE. I have tried them all.
Since error 101 alsways shows up, I have downloaded and tried HimaUpgradeUt_noID.exe (I put it in the same directory of Radio_.nbf and nk.nbf SEE ATTACHED PIC)
I have read many times 'READ_THIS_FIRST.txt'
I use bootloader 1.06
I get 'SERIAL' message on my XDAII when entering in boot mode and then USB, when connecting the USB cable DIRECTLY to my PC
I use activesync 4.1 : DO I NEED TO DOWNGRADE TO 3.8?
In fact Active Sync 4.1 maybe using network conflicting parameters?
I disabled antiviris and Zonealarm
Please help!
Saulo
Don't know much,but will ask you a question for orther to solve.
Do you use hub or use direct USB connection with your device?
dear Vivi
I use direct USB connection.
When cable is inserted, the device message change from 'serial' to USB'
Thanks and waiting
Saulo
Try reading this thread(click) .
Hope this help.
Try to include this in the installation folder...
In Windows Task Manager Kill the: "wcescomm.exe", "rapimgr.exe", and "wdfmgr.exe"
Hit the "HimaUpgradeUt_noID.exe" to start again.
jojo
Dear Buzzdev
Now in WM203se I have 125.86 MB Memory available for my programs or storage. I can allocate them and increse/decrease storage program ratip
After installed Windows Mobile what will be the scenario?
I heard someone saying only 32MB available (NOT allocable) between storage and program. Other saying 64MB other 90MB max
Please let me now
Thanks
Saulo866
I've flashed roms on my phone before before I had Vista...and now I can't! It always says that a problem has occurred during the process!
Plz help!
dcatus said:
I've flashed roms on my phone before before I had Vista...and now I can't! It always says that a problem has occurred during the process!
Plz help!
Click to expand...
Click to collapse
winVista still has some driver incompatibility,it requires some driver updates.Although,some guys have flashed via vista but used VMWare Workstation 6 .Others downloaded drivers from microsoft site to update the vista drivers and flashed,but still multiple problems have been reported afterwards while upgrading/downgrading,therefore,it's always better and recommended to flash in WinXP SP2.
Cheers
I can vouch for VMware Work Station 6(with winxp virtualized),
I've used it just last week to flash my G4 wizard with Blackdiamond 3.0 using G4 Soft spl
zabardast_1 said:
winVista still has some driver incompatibility,it requires some driver updates.Although,some guys have flashed via vista but used VMWare Workstation 6 .Others downloaded drivers from microsoft site to update the vista drivers and flashed,but still multiple problems have been reported afterwards while upgrading/downgrading,therefore,it's always better and recommended to flash in WinXP SP2.
Cheers
Click to expand...
Click to collapse
Noticed this same thing when using my dads laptop with Vista Home Premium to flash a Rom to my phone. It wouldn't work at all... It actually gave me an error message telling me to upgrade my drivers but that was all. It said Drivers Incompatible. Please Update.
I just let it alone and went back to my girlfriends laptop to fix my phone.
it works well...
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
native12 said:
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
Click to expand...
Click to collapse
Wizard Products can't flash on Windows Vista.
I using Vista but installed VMware Machine 6.0 and install WinXP on this VM and good work.
native12 said:
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
Click to expand...
Click to collapse
Question here is not that 'It can be done or can't be done ?',read my post where I said yes,guys have done it and are doing,but it requires some driver updates and some have done through VMWare,the only thing is that instead of going through all that updates and launching Vitual Machine process and as there has been reported problems afterward, "IS IT WORTH TO UNDER GO ALL THAT TROUBLE" when it's simpler and effortless to upgrade through WinXP ?
Hi there!
I just tried to install Cotullas WM6.1 ROM on my Magician (MDA Compact, Radio 1.12), as it didn't work on Vista I used XP. Entering bootloader mode was no problem, but on the second page of Update.exe I get an overview:
Your device software is about to update from:
[Nothing in here]
To:
[Nothing either]
However the upgrade completed on the PC without an error message, but I got no "100% Upgrade OS Image Complete" message on my device an after a reset there's still WM2003se on it.
What's the problem and how can I fix it?
seems you have no USB connection between device and PC.
you should check it. check if you see on device screen "USB\n\n\n\n\n1.0X"
Yes, the device in Bootloader mode shows "Serial v1.0.2" an when I connect it via the cable Serial changes to USB. My guess would be that Update.exe checks the wrong port. But even if the phone is not connected at all the update finishes without error.
Is Active Sync needed for an upgrade?
Where did you extracted the ROM?
Can you try to extract on the desktop and don't put in any folder and then flash the ROM.
it's on my desktop in the folder "HTCMAG_ROM_WWE_O3", copying files directly on the desktop didn't change a thing
UPDATE: Installing Active Sync solved the problem
yes you need install Active Sync for drivers.
is there previous your ROM 2.03TX?
is that TRUE meaning you couldn't upgrade to anything else! 2.03TX is bad rom!!!
It was no problem with the upgrading-process itself, it was simply that the program didn't find the phone but showed no error message. Might have something to do with a newer driver ActiveSync installed or just some registry values the update-tool needed.