hi friends,
i am a software and hardware developer in istanbul , Turkey
i have a O2 XdaII with 1 gb sdram ,
rom : 1.72.00
ext: 1.72.187
radio: 1.17.00
i tried to upgrade my old phone to wm 2005.. but..
first of all i found different types of roms , ext, radios..
i have
WM2003SE 2.06.00WWE XDA2
Wm2k5 1.65b.96WWE
2.06.100a SG Extended ROM
Radio1.18
Radio_XDAII_v1.18
ROM_XDAII_v1.60a.WWE_WM5
WindowsMobile2003SE_XDA2_2.20.00CHS-translated
Xda_II_172187_Final.exe
Xda_II_172181_Final.exe
Xda_II_Extended_16052.exe
active sync 3.8
active sync 4.0
active sync 4.1.0 (build 4841)
hex editors
xda2unlock.exe
and all other crap HTC64, himaupgradeut_noID and etc..
i tried all of the roms, exts, radios all other f#!*ing stuff..
everytime it takes more then 30 minutes..
at the end of every bios updates.. the activesync sometimes gave errors:
* the usb device could not be recognized.
* generic usb mobile device
* this usb device malfunctioned
* connecting... (and tries more then 4 hours and still connecting)
* found usb device (but not recognized)
* found ethernet device (what?)
and so on..
when i tried to install the updater provided by o2 , it works quite good. but it is 2003..
when tried 2003se then it did not work in Turkcell operator..
when tried 2.06 rom then the bluetooth crashed..
when tried 2003se xda2 2.20.00 CHS then it worked but again the activesync crashed..
when tried combination of the o2 provided ext and wm5 rom it worked! yes.. but again i could not install any application to the phone.. because the activesync again could not connect it..
i tried all activesync versions.. even i installed different winxp versions on my computer.. i tried media center edition 2005 and all other (maybe the activesync has problems), i used different language options.
i tried different computers (maybe the activesync doesnt like my computer.. maybe it have emotion, sensation who knows.. )
i wrote a program to reverse the data going out between pc and phone on usb..
i decode activesync and disassembe it but could not found why it is making like that..
sometimes my xda crashed and
at the end, i tear out my hairs..
i became insane..
at last.. now i have radio 1.12 , rom 1.60c wm5, ext 1.72.187
working .. but sometimes.. sometimes not..
when i change the usb port it works..
is there any stable solution to install wm5 on xdaII without having trouble with activesync?
and is there any Turkish language set (other then the mobilera company provided) ?
thanks..
PS: it i will not find any solution in 1 week.. then i will turn back to my Sony Ericsson P910i phone..
also that f*$#ing phone's support site closed the upgrade process..
you can enter the update service site but , you can not update your phone..
(maybe i shell try to breed tomato.. and build a farm.. forget about software development)
I´m sorry of of your bad experiences with w2k5, but my XDA works really fine with windows 2005! I use the latest version of buzzdev.net, which is the 1.65.b or something like that, and I have to say that everything is ok with my sd wifi card, with my 1giga sd card, and with telephone uses...
Maybe, the unique thing to comment is that one week ago, I soft reseted my XDAII, and then the screen was not aligned... AS you know the align proccess it´s only available after a hard reset, or in settings menu. So I had to enter the security numer tryin´ and tryin´the inside out numbers... Finally, after an aother asoft reset, the screen was aligned again...
73´s
i have the 1.65.c version..
can you please look the version you have?
and does the activesync works well?
thanks
Yap, Activesync runs good. The version is: 1.65b.96 WWE.
You can download in buzzdev.net
73´s
at last i solved the problem..
if you install ext rom .. no matter the bios rom version is..
the activesync is not working..
if you just install wm5.x.x version and the radio rom (anyone) and after the update if you press record and camera button while hard reset (power button and reset same time) . a menu appears with 3 options.
the selection order is no,yes,yes ..
after all.. thats all..
the activesync works well..
i tried 4 different roms and it worked..
now i have 1.70a rom..
but whatelse i am missing with not to install the ext rom?
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
Since upgrading to AS 4.5, I can no longer install applications on my htc Touch.
The error message reads:
"Application Manager cannot intall this application on your mobile device due to an error in the setup file. Reinstall and try again"
Happens with all .exe files and I have re-installed AS4.5 several times and tried "Repair".
Don't think it's an issue with programs that weren't designed for WM6 because I can't install the Sprite and spbGPRS programs from the htcTouch CD
I'm running XP Home SP2 and log on with Administrator privilages
The files install OK on my work PC which runs XP2 Prof SP2 with no Administrator privilages.
Any ideas anybody?
Anybody else...
...having this problem?
http://support.microsoft.com/kb/256020
http://www.google.com/search?source...an+error+in+the+setup+file&btnG=Google+Search
maybe
Been there, done that
no answers anywhere I can see.
The Microsoft site only applies to specific programs, like the Media Player one you pointed to or Powerpoint.
Only thing I can find is possibly the .ini file doesn't have the correct version notation for instance it states version 1 instead of version 1.0
That still doesn't explain why they all install on the PC at work though.
Both PCs running AS4.5, both running Windows XP
i dont really thing activesycn is good at cleaning up after itself when reinstalled and or uninstalled
i've seen lots of files in it's dir
and lots of registrys it leave behind
a good cause would go and hunt them down and make sure
that a reinstall is really a reinstall
Hello,
I have just upgraded my treo750v with 2.27. I have strictly followed the process and everything goes well even replications.
The only issue is the fact that I can't activate anymore my phone. When I try, device tells me : "A problem has occured with device.exe / please tell Microsoft about this problem....".
Other issue is that when I want to recover following your process, I find the folder but there is no T750URT.exe nor any other file.
Hereafter my configuration :
Windows XP SP2
Activsync 4.5.0 build 5096
phone id : Can't give as each time I want to get it, I have the waiting icon then "A problem has occured with device.exe / please tell Microsoft about this problem...."
Memory free : 36MB
Can you someone help me ? Even send tell me how to get a former SW with WM5.
Thanks in advance,
perform the upgrade again using the SD version (or extracted cheeimg_fw.nbh from updater) and KaiserCustomRUU.exe (search for file and how-to).
Then run UpdInfo.CAB (extracted from updater) to set version to 2.27
Hi,
Tks for the steps
For SD update it is OK.
I can't find anything clear enough for Kaisercustommruu.exe.
Issue solved
In fact, issue was coming from a wrong installation. I consequently unzip the download file (treo 750.....device installer) with winzip (can also with winrar) then launch T750URT.exe.
The recovery tool launch a new instal and everything goes well now.
In all cases, tks for your help and this great forum which teaches me a lot of things on my Treo 750.
Excellent, glad you figured it out!
The gist with KRUU.exe is to rename the file from "cheeimg" to "RUU_signed"
Now, I have ROM named c_shekhar WM3.18.931aCS WWE ROM, before that it was ROM Bepe 0.67.
And after update I have problem with runnig of iGO 2006 or other name OnCourse. Programm ever not tried to start. I tap on exe file and noting. Reinstall not given anything.
Somebody has same problem? How it can be resolve?
Try the last version of IGO.
rspillo said:
Try the last version of IGO.
Click to expand...
Click to collapse
IGO 8.0 not work too. IGO 8.3.2 work, but I don't like it version.
Conflict`
there seems to be a conflict between the HTC Home item and iGO2006 - once you have disabled the HTC Home item, iGO2006 will run as if nothing had happened -
(it's always better using the older reliable version rather than installing an updated fat and resources hungry version, I reckon..)
use this igo .exe file, overwrite after install the existing igo.exe in pda
should run then...
hello i have a samsung gt-c6625 and i was planing to use igo on it but i have a probleme..i copy igo on my storage card and when i wana run the .exe from my phone nothing happens actualy i can`t see any exe in my phone! why?