Related
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
Considering that cab file is from the Hermes/ WM6 Black ROM, it's probably NOT going to work on a Wizard.
Based on looking at the cab, it replaces 4 .dll files. My guess is that those are not compatible with the Wizard drivers. Just do a remove program and see if that fixes it. If not, then delete these four in \Windows and you should go back to the ones that were built into the rom:
serial_btur.dll
OEM_Misc.dll
btagext.dll
bthuart.dll
mfrazzz, do you maybe have a cab file for the bt drivers in your rom?
Hmmz, your tip worked. Thanks. I simply renamed those files to *.org and that did the trick. But maybe a question though, aren't there newer BT drivers for our wizzard?
You are a total @#$%$#@. What would make you think they were even for the wizard? And those bt drivers never even helped the the problem that black was having on the hermes. You need to do some more reading buddy. Lets not end up with bricks here
I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 3 version run from SD. 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended... 20090217.5.1R2 not tested yet.
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Many thanx to Aqrab for the original releases.
Edit 14/8/2009:
Added Esmertec Jbed 20090217.5.1R2 SD
as requested, plz test and report back ty.
Nice one!
Thanks for this, I'll have a test of it now
K0mmaT1A said:
I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 2 version run from SD, because 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended...
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Click to expand...
Click to collapse
I installed "Esmertec Jbed 20080912.5.1 SD.zip" After Hard Reset, Very Good Working. It was very important for me. Thank you very much.
Doesn't work
Hi!
I'v tried this two versions,but them doesn't work.
I'v tried on ASUS P525 pda windows mobile 5.
The programs doesn't start when I want to start it write that (the 'jbed' file can't open....)
ÁDÁM
feinadam said:
Hi!
I'v tried this two versions,but them doesn't work.
I'v tried on ASUS P525 pda windows mobile 5.
The programs doesn't start when I want to start it write that (the 'jbed' file can't open....)
ÁDÁM
Click to expand...
Click to collapse
Try installing a non SD version first (from the link in first post) and make sure you can run jbed, then try the SD version, try hard reseting before running too.
If you can't run anyone, see troubleshooter in official jbed site.
regards
K0mmaT1A said:
Try installing a non SD version first (from the link in first post) and make sure you can run jbed, then try the SD version, try hard reseting before running too.
If you can't run anyone, see troubleshooter in official jbed site.
regards
Click to expand...
Click to collapse
I'v done that you wrote.But 1 version has the"unknown" problem,another doesn't start, one strart and with this the games are starting but I have problem with the buttons.(when I use the buttons(1,2,3..9)I press some button once but the game feel like I Press constantly)
In build 20081203.2.1 this "direction keys bug is fixed but there are problems with many games.
THX!
It looks like it's device specific problem..
You should put on your signature your device information or post them first, so someone with your device could help you out.
Im having a problem on my htc blue angel, the hardware buttons that supposed to work as soft keys witch are calendar and contacts arnt working, when i press this keys they open up there pre define programs i.e contacts calendar, when i disable this keys programs so they dont open contacts/calendar the java manager stills does nothing i stay stuck at the screen were its says "do you want sounds yes or no", ive been draging this problem since many versions before this one, thats why i cant enjoy java on my phone witch sucks cause i love to play games on my device, can anyone inlight me on a posible solution??
rafyvitto said:
Im having a problem on my htc blue angel, the hardware buttons that supposed to work as soft keys witch are calendar and contacts arnt working, when i press this keys they open up there pre define programs i.e contacts calendar, when i disable this keys programs so they dont open contacts/calendar the java manager stills does nothing i stay stuck at the screen were its says "do you want sounds yes or no", ive been draging this problem since many versions before this one, thats why i cant enjoy java on my phone witch sucks cause i love to play games on my device, can anyone inlight me on a posible solution??
Click to expand...
Click to collapse
hehe that's not even a problem
go to settings -> buttons and set the coresponding buttons to <left Softkey> and right...
WiFi connection light
Sorry to bring this on but this is a bit annoying. After launching Java from Esmertec Jbed 20080912.5.1 (installed on SD card) the blue diode (HP IPAQ 210) for WiFi connection turning off. Internet access is OK but diode is off. Any suggestions?
Hi
I installed 20081203.2.1 SD version on Samsung Omnia and work nice.
thanks dear K0mmaT1A
where exactly is the succesfully installed .jar file is being put by jbed on my storage card?
cos i cant (dont know how) find them? i just want to make sure that it was already installed on my SDcard instead of device ram, so i can install another .jar file..
thx
It should be under appdb folder.
K0mmaT1A said:
I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 2 version run from SD, because 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended...
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Click to expand...
Click to collapse
Hi. I use Esmertec JBed 20080912.5.1, maked by You, and think it's great job!!
But i saw last time newest wersion Jbed 20090217.5.1, but only to install on My Memory :/
Try make this installable on StorageCard...??
need help
hello guys, new to this forum.. i tried to download this sd version of jbed, but when i am on the first page of the thread, i am no longer logged in.? im back logged in on the second page, but not when i go back to the first.. consequently, i cant download the file.. when i do it brings me to a login screen and runs in a sort of a loop.. i log in, it says thanks and brings me to the login screen.. help?
thanks jay..
nevermind
nevermind, i figured it out
If problem will be back, write here. Send you on email or hosting serwer
Esmertec Jbed 20080912.5.1 SD.zip
Works fantastic on Asus P750 with Gmail 2.0.6 & Opera Mini 4.2! Thank you very much!
Hi,
as newer jbed is released, can you make a new one to be able installed on storage card?
or does anyone know how to change the cab so that I can change the newer jbed to be able installed on storage?
once i succeed, i'll post to this thread.
And, is everyone has sound enabled when using jbed?
cause mine dont have any sound. i'm using BlueAngel.
Thx
Esmertec Jbed 20090217.5.1R2 SD
Added Esmertec Jbed 20090217.5.1R2 SD in first post.
Try and report if all is working good. I'll try myself all basic apps when I'll have time...
Hello
I.ve flashed my Touch Cruis to the original Dutch HTC WM 6.1.
After the flash a peace of TomTom is still in the machine.
I can't remove via Programms and it's also not possible to reinstall the program.
Does anybody know how to solve this problem.
I also did a hard reset but this won't solve the problem either.
Hope somebody knows what i have to do now
Thanks
bukkie said:
Hello
I.ve flashed my Touch Cruis to the original Dutch HTC WM 6.1.
After the flash a peace of TomTom is still in the machine.
I can't remove via Programms and it's also not possible to reinstall the program.
Does anybody know how to solve this problem.
I also did a hard reset but this won't solve the problem either.
Hope somebody knows what i have to do now
Thanks
Click to expand...
Click to collapse
I.ve got new information. In the Windows directory there's a file called TTN.cab.
This file seems to be "read only and system.
I.ve try to change the attributes with TotalCommander but that won't work.
Can't delete the file because of the attributes. I've serch the registry for TomTom entrancesbut couldt't find one either Please is there somebody who can help me.
Total Commander clearly shows it's part of the ROM, and I'm afraid you won't be able to remove it.
Bodisson said:
Total Commander clearly shows it's part of the ROM, and I'm afraid you won't be able to remove it.
Click to expand...
Click to collapse
Ok if that's true why can't i install ie again.
Do i maybe have to upgrade TomTom tot a newer version because the version i have won't install either anymore. By the way the version i got was installed before the Upgrade to WM 6.1
Hard reset will install all original software (including TomTom), but will also delete all your data and non-ROM software, so do backup first.
I don't use TomTom, so I don't know if upgrade is possible.
Yesterday I got my T-mobile MDA compact 5 and now I'm trying to install some navigation software.
I tried tomtom and sygic mc guider.
Both won't install, what am I doing wrong?
Thanks in forward.
WilcoD said:
Yesterday I got my T-mobile MDA compact 5 and now I'm trying to install some navigation software.
I tried tomtom and sygic mc guider.
Both won't install, what am I doing wrong?
Thanks in forward.
Click to expand...
Click to collapse
Can you be more specific?
Which actions do you perform? Input and output?
Usually it's just executing the cab file on your mobile and done.
When I try to install the tomtom cab it hangs at the first block of the progress bar.
And when I try to install mc guider it tells me that it's not an original SD card?
Even though when I try to install the Dusk theme it doesn't too??
I think it's a bit strange?
A little update.
TomTom is running
Now I need to install the maps I don't have any idea yet how to do that?
Can someone help me with that?
Thanks.
WilcoD said:
A little update.
TomTom is running
Now I need to install the maps I don't have any idea yet how to do that?
Can someone help me with that?
Thanks.
Click to expand...
Click to collapse
With my install on the TouchPro² it was somehow included, the map already had to be copied on the SD card.
Installing a new map, I don't know. I've the Benelux now and I want to install the Europe but the guide is written in unclear broken English. You have to use Easyinstall or something :S.
Help WilcoD or help me
Hey Wilco,
i've got a diamond 2 too. first you've gotta have frameNET 3.5 installed on your phone. Then download the map you wanna use, i've got western and central Europe 2GB version. And first let it be placed on your pc.
Then install 'easy activator' on your pc, and run the program. Running it speaks for itself.
Then instal the maps on your TD2, on the sd. And get the 'voice fix' file and place that in the 'navigator' folder.
And your good to go.
Good luck
All sorted out, works like charm now