When I try to uninstall any software from my jamin (prophet) i get the following message: "this program was not completely removed. do u want to remove it from the list of installed programs."
And in fact the program is not removed at all and I have to delete the files manually, then go to the registry etc...
If i try to uninstall from activesync on the pc, the uninstall windows will simply shut, and uninstall would not proceed.
On the "first days" of my jamin this odd behavior never happened.
Any clue about this?
Thanks all
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
levenum said:
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
Click to expand...
Click to collapse
Thanks for ur reply. But it is not due to either of the 2 causes u mention...
Same happening to me and it's driving me crazy!
please someone help!
You're problems may not be from device side but from software side...
I also had this problem as a developer when i used releases for 2003 devices on 2005 devices (they work well no doubt about it but the message error ocures constantly). The main problem comes with softwares that have a customised setup.
Cheers,
Raul
xusso said:
Same happening to me and it's driving me crazy!
please someone help!
Click to expand...
Click to collapse
Whenever I have had this a soft reset normally solves it.
In other words when you see the error message "not successfully uninstalled do you want to remove the files in the installed list" answer NO then soft reset and try again.
BTW if the program has a today plugin - this should be unchecked before doing the soft reset.
Matt
his has hapened to me also with my Qtek S200 WWE.
But if I soft reset my device and once it boot's up (after quite some time Evil or Very Mad ) I unistall whatever I need to uninstall, then it works just fine.
I have also noticed that by using "Freeup Ram" (part of SKTools) then I'm able to unistall without problems.
Best regards,
Rayan
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
Now, I have ROM named c_shekhar WM3.18.931aCS WWE ROM, before that it was ROM Bepe 0.67.
And after update I have problem with runnig of iGO 2006 or other name OnCourse. Programm ever not tried to start. I tap on exe file and noting. Reinstall not given anything.
Somebody has same problem? How it can be resolve?
Try the last version of IGO.
rspillo said:
Try the last version of IGO.
Click to expand...
Click to collapse
IGO 8.0 not work too. IGO 8.3.2 work, but I don't like it version.
Conflict`
there seems to be a conflict between the HTC Home item and iGO2006 - once you have disabled the HTC Home item, iGO2006 will run as if nothing had happened -
(it's always better using the older reliable version rather than installing an updated fat and resources hungry version, I reckon..)
use this igo .exe file, overwrite after install the existing igo.exe in pda
should run then...
hello i have a samsung gt-c6625 and i was planing to use igo on it but i have a probleme..i copy igo on my storage card and when i wana run the .exe from my phone nothing happens actualy i can`t see any exe in my phone! why?
Yesterday I got my T-mobile MDA compact 5 and now I'm trying to install some navigation software.
I tried tomtom and sygic mc guider.
Both won't install, what am I doing wrong?
Thanks in forward.
WilcoD said:
Yesterday I got my T-mobile MDA compact 5 and now I'm trying to install some navigation software.
I tried tomtom and sygic mc guider.
Both won't install, what am I doing wrong?
Thanks in forward.
Click to expand...
Click to collapse
Can you be more specific?
Which actions do you perform? Input and output?
Usually it's just executing the cab file on your mobile and done.
When I try to install the tomtom cab it hangs at the first block of the progress bar.
And when I try to install mc guider it tells me that it's not an original SD card?
Even though when I try to install the Dusk theme it doesn't too??
I think it's a bit strange?
A little update.
TomTom is running
Now I need to install the maps I don't have any idea yet how to do that?
Can someone help me with that?
Thanks.
WilcoD said:
A little update.
TomTom is running
Now I need to install the maps I don't have any idea yet how to do that?
Can someone help me with that?
Thanks.
Click to expand...
Click to collapse
With my install on the TouchPro² it was somehow included, the map already had to be copied on the SD card.
Installing a new map, I don't know. I've the Benelux now and I want to install the Europe but the guide is written in unclear broken English. You have to use Easyinstall or something :S.
Help WilcoD or help me
Hey Wilco,
i've got a diamond 2 too. first you've gotta have frameNET 3.5 installed on your phone. Then download the map you wanna use, i've got western and central Europe 2GB version. And first let it be placed on your pc.
Then install 'easy activator' on your pc, and run the program. Running it speaks for itself.
Then instal the maps on your TD2, on the sd. And get the 'voice fix' file and place that in the 'navigator' folder.
And your good to go.
Good luck
All sorted out, works like charm now