Hello,
I have a big problem and I hope you can help me.
A few weeks ago I want to update my Treo to WM6.5 and use a Rom (I think from navenedrob) which was timebombed (since there I don't know it).
Now I want to update my Treo to the right version from this thead :
http://forum.xda-developers.com/showthread.php?t=541417
but when I start the update with the cheathunlocker tool, it stops at 7%, the usb connection get lost and my Treo make a restart and the old bimebomed version is there...and the tool says, that the file is curuppted and i should check my update tool... but this message comes every time also with other roms.. When I use the method with the media button there comes the colored screen with "serial" and nothing happens.
(The sd card is okay and the same card which I use to install the timebombed version)
What should I do? I can't do anything... Please help me
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
4. if it does not help - try to install 6.0 rom from palm .
Hello
1. format the card 32fat.
2. do not use hc card.
3. try to download again the rom.
I tried this very often... But nothing helps
Where I can get this Rom? On the plam homepage I can't find a Rom, only instructions and a download for Mobile center.
http://rapidshare.com/files/173145556/Treo750_2.23_ROW_WM6.rar
For England (750V) :
http://www.megaupload.com/?d=PS2QHTE6
Oh really thank you for the Roms!
But I have a problem, my Treo dosn't connect to my Pc. When I click to my workplace there isn't a hhd from the Treo.. and the Mobile Center show me, that there i no connection... I have Windows 7, under Windows Vista it don't work too...
Because of that I can't update my Treo.
Do you know the problem and how to solve it?
Really big thank you, this here is a nice community where I get help!!
1. try to install from WINXP - look for another computer...
2. there is a way to get the rom from the file - maybe with winrar- I'm not sure but I remember something like it...
3. look for a rom 6.1 and try to install it from the card.
Okay I try it under Windows Xp, but I get no connection
I get the Rom from the .exe file by 7zip and copy it to the sd card, but the same problem is there at 7%
Do you have maybe am link from Wm6.1?
I think all this dosn't work.. I don't know what the problem is..
What other possibility can I try? There must be a solution for it...
a link to 6.1
http://www.mediafire.com/?4gxsdxh1tmm
maybe you need to replace your card...
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
the "serial" problem happened to me too. It was because bad rom file or bad card.
Okay today I try it with an other Card and 2 Roms (also the orginal Rom), but in the bootloader modus there is every time the "serial" and below..
Palm Tr
IPL-0.20
PalmTr
SPL-0.24.0000
Serial
And when I try it with the cheetahunlocker, it stops at 7% and my Treo make a restart and the old timebombed version is loading..
But maybe my sd card slot is broken from my Treo or the sd card adapter...
because when I run the cheetahunlocker without an sd card, it also stops at 7%...
any idea to check this? Or an other way?
Hey I might have a solution here:
When you format the Mini SD card, do NOT do a quick format. Uncheck that box and do a full format, FAT32, Default Allocation Size.
This took over 15 minutes for me.
Do a scandisk (Right click the drive/tools/scandisk) and check "Fix Errors". This should ensure your SD card is in good shape.
Now copy a good ROM to the card and reset+PTT. The Palm should flash successfully now. If not your ROM may be corrupted.
Hope this helps! It worked for me!
1. Format sd card to fat32
2. find the .nbh file in the stock ROMS
3. rename it CHEEIMG.nbh
4. copy it to the sd (make sure it is not hcsd or it won't work)
5. insert the card in the card reader
6. reset the phone by using the stylus and the reset button next to the card reader, at the same time hold the PTT button on the left side of the phone, (this will put it bootloader mode)
7. when prompted, press the end talk button on the phone, this should start the update process without using activesync.
HardSpl
1. redownload the app and extract using 7zip
2. make sure you have .NET compact framework 3.5 installed on the PC and the phone
3. in CHEETAH unlocker press ctrl+2 and click the header (this will unlock all three options)
4. follow steps
The radio it flashes will not be a good one, so you need to search around to get the right one. Once those steps are complete, you should be able to reflash WM 6.5 without any problems. If you download Navendrob's ROM, you will need to download the arcsoft mms composer to make mms work, and you should be good to go.
Hi backspacepc,
thank you for your help!!!Now it works.. I didn't rename the file. so this was the problem
Hi,
I have a question about this rom. (Wm6.5 from naevendrob)
My touch is broken, so I can't use the touch. Now I have the problem, that I only end a call with touching "end" and not with the normal hang up button on my keybord.
My second problem is, that I can't lock my Treo, because when I want to unlock it, I have to use the touch display.. On Wm 6.1 I could turn my screen with the hang key on my keyboard off.. this is now on this Rom not possible, or do anybody have a solution for this? Maybe in the registry or something?
Thank you
Has nobody a anser?
Speedkazze said:
Has nobody a anser?
Click to expand...
Click to collapse
Since your issue is with the ROM you loaded & your hardware problem, you should bring it up at the specific thread where you downloaded the ROM from.
I would recommend getting the touch screen fixed or roll back to WM6.0.
No it's a Problem with my Treo. I change the touchscreen one time and it works for a while, but after maybe 2 months the touch dosn't work.
Can anybody maybe write a file that i can use the hang up button to hang up without the touchscreen?Or has anyone an idea to change it maybe in the registy or sth. like that?
Speedkazze said:
Okay thank you.
I try it with an other card and hope it works..
But I think, that this don't work, because when I press the media button und reset, there comes the bootloader with "serial" on the bottom of the display and when I connect it to my pc "usb".. but I can't start the rom with this method...
I try it tomorrow and tell you if it works or not
Click to expand...
Click to collapse
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
juancamaney69 said:
Yes I have the same problem, i try with two micro SD card 2 and 1GB formatted to FAT32,and i didnt use quick format, and the cards aren´t HC. but is not working, I supose isnt the card, something is missing,
Please, Can Somebody Help us????
thanks a lot
______________
gracias de antemano
Click to expand...
Click to collapse
HardSPL the phone first, then it should work.
Related
I am having lots of problems getting ActiveSync to work. I can transfer files using Bluetooth.
Do I need a working ActiveSync connection to flash a ROM?
The Hard SPL pages talks about connecting the ActiveSync cable, but does not say why this is necessary.
I have a 4 Gig MicroSD card installed. Can I simply load all the necessary files onto it and go from there?
Perhaps a non-Orange ROM will solve my ActiveSync problem (not the reason I want to flash, but a possible good side effect).
Yes, you need activesync or the vista counterpart.
Try this - go to Settings | Connections | USB to PC | UN-check Enable Advanced network functionality and see if that helps
derek-farn said:
The Hard SPL pages talks about connecting the ActiveSync cable, but does not say why this is necessary.
Click to expand...
Click to collapse
ActiveSync will tell your Windows XP that the connected device is a Pocket PC and not something else. (Drivers)
I have a 4 Gig MicroSD card installed. Can I simply load all the necessary files onto it and go from there?
Click to expand...
Click to collapse
ROMs can be flashed with SD card. But the method and the files are different. Usually this is not on a first priority choice for cookers. And I dont remember Hard-SPL through SD. Though, going through a PC is always best as flashing ROMs are quite dangerous and if anything gets stuck in the middle, you shall try again from the PC but not through SD when your device doesn't even boot!
Perhaps a non-Orange ROM will solve my ActiveSync problem (not the reason I want to flash, but a possible good side effect).
Click to expand...
Click to collapse
Original(shipped) ROMs are always best. They dont give you much errors. People recover their device using original ROMs in case if they bricked their device using a cooked ROM! Original ROM can be flashed direct from Bootloader screen most of the times but would still require ActiveSync be installed.
Regards,
Carty..
You can use your memory card as per instructed here > http://forum.xda-developers.com/showthread.php?t=336158
Also you could try and put your phone into the bootloader mode by hand (instructions here > http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets ) that should work also as your computer uses a different set of drivers when flashing
Hey guys I have read all the articles on how to flash my fuze and I feel pretty confident in how I am doing it but I am having no luck on getting my fuze to flash the HardSPL. I am trying to use OliNex flash instructions. What is happening is that I have hooked my phone to a XP machine running Active Sync 4.5. I also made sure I had the .NET Framework 3.5 loaded. I run the RaphaelHardSPL-unsigned_190_1_3.exe. I follow the on screen instructions and then all of a sudden my phone goes black and you can here through Windows that the USB connection disconnects. The status bar on the computer stays at 0% and then after a few minutes it gives me a Error 262 Update Error and then starts the recovery process. My phone still works, but I can't seem to get it to flash. Any ideas?
Thanks
-Smicale
This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.
Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around
u2pop said:
Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around
Click to expand...
Click to collapse
I have tried both XP and Windows 7 with no luck.
Bruce Inman said:
This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.
Click to expand...
Click to collapse
Bruce,
can you verify that this is possible to flash a SPL from SD card? If so I will try it right away.
Thanks
You can flash any .nbh file from bootloader.
Here is a brief instruction.
Also, for your PC issue, make sure you have netcf 3.5 installed.
I found a way to get cabs to install via ctiveSync/Windows Mobile Device Center. Previously I have came to a problem that it does not run as administrator. With a combination of CABviaAciveSync and Always Run as Administrator I have solved this problem.
To get the latest of each go here:
CABviaActiveSync
Always Run as Administrator
Use ARAA to make "CABviaActiveSync.exe" ARAA and then you should be able to install via ActiveSync/Windows Mobile Device Center!
As a side note I'd like to mention that if you use this plus AppToDate will make it even easier. After a hard reset (can't figure out how to cook my own rom... yet) all I have to do is install my old version of the app then AppToDate updates them all!
Very nice. I have found it's just as easy to load any cab file onto the micro SD card, and run the cab file from the SD card on the phone...
Scott
poriggity said:
Very nice. I have found it's just as easy to load any cab file onto the micro SD card, and run the cab file from the SD card on the phone...
Scott
Click to expand...
Click to collapse
Thats what I have been doing but after many flashes its gets a tad annoying. I'm also aware of programs that will install a complete folder of cabs but I just prefer using the computer. I do keep all the cabs on my SD too just in case i have to Hard-Reset on the go.
will this work on windows 7 x32?
using htc hd2 phone
hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.
I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!
I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.
this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.
almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.
The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him
Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys
I am trying to switch over to Android from WM 6.5 on a HTC HD2 from T-Mobile. I've spent a lot of time reading about how to do this and deceided to give it a try.
I've been following guide by ThaDeanesta [GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs]:
1. Have radio 2.06.50.23 already installed.
2. Downloaded and installed HARDSPL 2.08.
3. Downloaded and installed MAGLDR 1.13. The aMAGLDR V1.13 Build: Feb 1, 2010 by Cotulla, starts up fine.
Here is where I'm having trouble. I downloaded "SuperRAM_Froyo_v1", extracted it to a folder. I have tried a number of things and hot sure where to go from here. Don't know if i should try a different RAM for my first attempt. I can see my MC in the phone thru USB MassStg. Tried copying folder to root and restarting phone. Just comes back to MAGLDR screen. Not sure if I'm doing this correct. I'm sure I am close to completing this for my first time but need a little help.
Thanks to anyone who is willing to help.
Jack
No, I unzipped it with jZip and then copied the folder to sd card. Then the instructions said to run CLACAD and haret from the phone. I was not sure how to do this. I just restarted my phone while holding down the volume and off. Connected my phone to the computer and ran the latest htc rom to get my phone working again. Phone has been down for a day. I still want to install Android. I'm not sure what CWR is?
Jack
Are you trying to install it from your SD card? Well..that's a different story then....go to your SD card root and tap on haret that should get you going
BTW ..
CWR =clock work recovery.
Thanks, I will give it a try. I wanted to load it thru the USB cable but couldn't figure out how to do it. From futher reading I think you can do it thru the bootloader.