Good evening everyone - I spent all the afternoon trying to hard reset my ETEN G500+ WM5:
1) normal hard reset with hard keys: dont work (on a G500+ : power button /then/ soft reset button with the power button still pushed /then/ drop both at the same time)
2) Install hard reset .net software and run it: dont work
3) Install HardReset 1.0 and run it: dont work
4) Try to find Parameters/System/Clear Data but it doesn't exist on my WM5 (maybe deleted by an installed software, last time i did this to hard reset my G500+)
5) Try to find \Windows\ClearStorage.exe file but it doesn't exist
6) Try to leave my PPC for 1 hour without battery: only reset the hour to 12:00
=> can someone give me the ClearStorage.exe file or anything else to hard reset my Pocket PC ........ PLEASE
Done!
I finaly did find the solution (after manyxxxxxxx hours)
After the launch of the hard reset it is needed to stay pushed on the endcall button till a message comes out to enable the hard reset!
Thanks anyway for the ones who tried to find me the answer!
are you sure it works?? i've tried with mu o2 atom still only soft reset..any clue of it??
Related
Hi,
I've just upgraded to WM2k5 ver 1.60c. 96 but I noticed that when I hard reset the device, nothing is reinstalled or uninstalled... everything remain the same..
Even the welcome.exe doesn't work..
It's like hard and soft reset are the same....
I uninstalled some apps that have been installed from extended rom at the first boot and hard reset doesn't reinstall them..
Any idea?
ok it was no a problem... now i solved it... excuse my ignorance..
Hi,
How could u hard reset the device? I couldn't... My radio does not work and my usb connection is down
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Hey, i have upgraded my iPAQ 2415 to WM2005(Windows Mobile) and i am not satisfied with it and alot of applications dont work well on it so i dont have original back up and i want to revert back to WM2003. I tried to press the RESET button on the iPAQ but it didnt reset to WM2003 it just reset to a new WM2005. I tried to load a ROM of WM2003 and it didnt work, i just got a message: "Hello world" and nothing happens and i just have to reset and same thing happens over and over..
please help
look to followink link:
http://www.smartturk.info/modules.php?name=Forums&file=viewtopic&t=675
how can i find my card reader drive letter mate? its not F or G, i tried both
please help me and is this correct, i copied all files from BUILD FOLDER to WINDOWS directory and also moved SPV.img file to WINDOWS DIRECTORY.. have i done all the steps correctly?
Evening all, well do i have a problem or do i have a problem! *or im just being stupid! lol*
i have an xda2 *himalaya* and was shipped with win mobile 2003
upgraded it to windows mobile 2005 *1.60c wwe* 128mb ram version
used the extended rom unlocker and the himalaya DOC tool to merge the extended rom with the storage to increase the main device storage space.
basicly messed around with it a bit and decided i wanted to hard reset it and run it nice and clean from scratch.
pressed the reset button at the bottom, with the power button, and it booted up as it was without hard resetting :?:
took the battery and sim out for a whole week to let it blank out and still no hard reset.
thought to myself, "i know! ill downgrade it to 2003 again, wiping the phone clean and then install 2005 again then it will be nice and clean*
did that and when i reformatted with 2005 the damn thing was back to when it was before i instaled 2003!!!!!!! *contacts, all installed programs, wallpapers, ringtones the lot!...
i cannot hard reset my device in any way at all!!, even totally formatting it, any ideas at all, i wanna put it back to a nice fresh install of 2005!!!
any help would be greatly appreciated ;-)
HOW TO RUN IT
-------------------------------------------------------------------------
1. Install ExtendedROM Unlocker.
2. UNHIDE and UNLOCK your ExtendedROM.
3. Run the Hima_DOC_Tool_1.0.exe on your device.
4. Hardreset your device
I have a problem,
When the phone starts its sarts loading the windows and then stak at the Sumsun Logo.
How can I do Hard Reset to it ?
Ron
Samsung SGH-I620 hard Reset
reset SGH-I620
Hi,
I've a SGH-I620V (vodafone branded), but the procedure should be the same:
There are two ways:
1)
1 Switch off the phone, press the navigation button down and switch on.
2 It will ask the format password "1234"
2) Go in windows folder and execute adminsetting.exe or digit *#3695147*#
3) Execute "Preconfiguration", the password is *#83301*#
I've few problems with this phone, and It's difficult find out informations.. for example, does somebody know if any gps navigator works on this phone?
neko79 said:
Hi,
I've a SGH-I620V (vodafone branded), but the procedure should be the same:
There are two ways:
1)
1 Switch off the phone, press the navigation button down and switch on.
2 It will ask the format password "1234"
2) Go in windows folder and execute adminsetting.exe or digit *#3695147*#
3) Execute "Preconfiguration", the password is *#83301*#
I've few problems with this phone, and It's difficult find out informations.. for example, does somebody know if any gps navigator works on this phone?
Click to expand...
Click to collapse
how to enter downoad mode sir ?
i try tomtom and runs
Hi,
my Vox was ok with Fireburned Clean WM 6.1 ROM.
I wanted to install the 96 DPI cab taken from
http://allshadow.com/forum/viewtopi...k=t&sd=a&sid=4e574745def746ba36125fd49101481a
I installed correctly following the instructions, and rebooted.
Now, after boot, the following things dont work.
1. File explorer - so i cant go to any folder or delete any files on \windows folder.
2. activesync connection is broken so i cant install a new ROM.
3. recently accessed app list shows blank.
4. my home screen is blank.
The only thing that works is the dialpad where i can make voice calls.
Can anyone tell me how to do a hard reset (any key combination or shortcut??).
Thanks in advance.
I recommend you to uninstall 96 DPI update. To do this, flash your Vox from SD card instead of using ActvieSync connection. How to do this, check Vox Wiki.
Hard Reset Second Way:
Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
If you cant make it with this [you must have good timing].. turn off your phone, hold camera button, and plug usb.
the u can run a rom update utility.
akumalol said:
Hard Reset Second Way:
Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
If you cant make it with this [you must have good timing].. turn off your phone, hold camera button, and plug usb.
the u can run a rom update utility.
Click to expand...
Click to collapse
i tried trizzos method. but everytime i press camera and plug usb power, the "upload from sd card" screen would come and then just show the bootloader. i formatted twice to FAT32 but still no luck.
Then i followed akumalol's two ways,
the hard reset via soft keys + power key combo didnt work. i tried few times.
But, the second method worked!!!!!!!!!
that is
1. switch off phone
2. hold camera button and plug in usb power cable
3. phone boots to bootloader
4. now use any of the OS drop posted by our Gurus, and execute Flash.exe, it then connects to the phone via activesync and downloads the image.
Thanks very much guys. i will take note of this method as this is my first bricking the phone although the phone came up but no activesync no file explorer.....
Thanks again Trizz and Akumalol.....
Well I tought hardreset would be ur lasta alternative... the method posted by akumalol is the only one i ever used and it works but you have to put ur finger on the softkeys in less than a second after u have powered on the device..this is why some users have no luck with it...u have to be VERY VERY QUICK!
i tried 4 times with no result.. it directly booted to the current OS.
maybe i have poor reflex than you folks..
ahahah no it's a tecnique issue...put your thumbs on the softkeys and with an other free fingers power on the phone... don't tell this to anyone it's a secret tecnique
hahaha. thanks. i will try it when i bust my phone again !!!!.
anyways. thanks for your help.