Database Info

Samsung SGH-I620 hard Reset

I have a problem,
When the phone starts its sarts loading the windows and then stak at the Sumsun Logo.
How can I do Hard Reset to it ?
Ron
Samsung SGH-I620 hard Reset

reset SGH-I620
Hi,
I've a SGH-I620V (vodafone branded), but the procedure should be the same:
There are two ways:
1)
1 Switch off the phone, press the navigation button down and switch on.
2 It will ask the format password "1234"
2) Go in windows folder and execute adminsetting.exe or digit *#3695147*#
3) Execute "Preconfiguration", the password is *#83301*#
I've few problems with this phone, and It's difficult find out informations.. for example, does somebody know if any gps navigator works on this phone?

neko79 said:
Hi,
I've a SGH-I620V (vodafone branded), but the procedure should be the same:
There are two ways:
1)
1 Switch off the phone, press the navigation button down and switch on.
2 It will ask the format password "1234"
2) Go in windows folder and execute adminsetting.exe or digit *#3695147*#
3) Execute "Preconfiguration", the password is *#83301*#
I've few problems with this phone, and It's difficult find out informations.. for example, does somebody know if any gps navigator works on this phone?
Click to expand...
Click to collapse
how to enter downoad mode sir ?

i try tomtom and runs

Activesync doesnt work, cant access File explorer what to do?

Hi,
my Vox was ok with Fireburned Clean WM 6.1 ROM.
I wanted to install the 96 DPI cab taken from
http://allshadow.com/forum/viewtopi...k=t&sd=a&sid=4e574745def746ba36125fd49101481a
I installed correctly following the instructions, and rebooted.
Now, after boot, the following things dont work.
1. File explorer - so i cant go to any folder or delete any files on \windows folder.
2. activesync connection is broken so i cant install a new ROM.
3. recently accessed app list shows blank.
4. my home screen is blank.
The only thing that works is the dialpad where i can make voice calls.
Can anyone tell me how to do a hard reset (any key combination or shortcut??).
Thanks in advance.

I recommend you to uninstall 96 DPI update. To do this, flash your Vox from SD card instead of using ActvieSync connection. How to do this, check Vox Wiki.

Hard Reset Second Way:
Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
If you cant make it with this [you must have good timing].. turn off your phone, hold camera button, and plug usb.
the u can run a rom update utility.

akumalol said:
Hard Reset Second Way:
Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
If you cant make it with this [you must have good timing].. turn off your phone, hold camera button, and plug usb.
the u can run a rom update utility.
Click to expand...
Click to collapse
i tried trizzos method. but everytime i press camera and plug usb power, the "upload from sd card" screen would come and then just show the bootloader. i formatted twice to FAT32 but still no luck.
Then i followed akumalol's two ways,
the hard reset via soft keys + power key combo didnt work. i tried few times.
But, the second method worked!!!!!!!!!
that is
1. switch off phone
2. hold camera button and plug in usb power cable
3. phone boots to bootloader
4. now use any of the OS drop posted by our Gurus, and execute Flash.exe, it then connects to the phone via activesync and downloads the image.
Thanks very much guys. i will take note of this method as this is my first bricking the phone although the phone came up but no activesync no file explorer.....
Thanks again Trizz and Akumalol.....

Well I tought hardreset would be ur lasta alternative... the method posted by akumalol is the only one i ever used and it works but you have to put ur finger on the softkeys in less than a second after u have powered on the device..this is why some users have no luck with it...u have to be VERY VERY QUICK!

i tried 4 times with no result.. it directly booted to the current OS.
maybe i have poor reflex than you folks..

ahahah no it's a tecnique issue...put your thumbs on the softkeys and with an other free fingers power on the phone... don't tell this to anyone it's a secret tecnique

hahaha. thanks. i will try it when i bust my phone again !!!!.
anyways. thanks for your help.

Help recovering Asus P527 BAD FLASH!! (GSMFFS.NB0)

Hi,
Help needed to restore GSMFSS.NB0 cause flash stops with message,
"GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead."
Is there a way to format all rom?
Thanx

If you have an original RUU (from either manufacturer or vendor), you could try that and see if you can flash an official rom. First thing would be if you can get into bootloader. If you can't, then I am afraid that you got yourself a pretty expensive paperweight.
However, if you can get into bootloader, there is still hope...
I am sorry but I cannot guide you through the bootloader process for your phone, but I do not own that device. However, this seems to be a way to possibly recover most phones I have seen so far.

Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx

santosru said:
Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx
Click to expand...
Click to collapse
Well, that is fairly good news... you can apparently access bootloader, so not all hope is lost. As far as the P525 kitchen, you always have to be extremely careful when using a program that was designed to work with a different device from yours.
Have you tried using the RUU after getting the device in bootloader mode? In other words, get it to this status, connect the USB cable to the computer (establish a connection), and then try to use the RUU. It could be that the GSMFFS error could be from the RUU not being able to put the device into bootloader.... It might just work... Good luck!

I got this out of an Asus Russian forum
"Proshivatsya in expert mode, though, and so like to ask
But if you do not return startanet through the expert mode
Hold down, press and hold OK (side button), tyknut stylus reset.
Wait for the appearance of the caption "IPL: Insert USB CABLE"
On the PC run P527FUU.exe, in the back left corner click on the program icon, choose the Expert Mode
Connect the cable and click Update
Do not guarantee the accuracy of keystrokes, but in the manual for the R527 is written that way. "
Here is the link for the site (already google translated)
http://translate.google.com/transla...earch?q=GSMFFS&hl=en&rlz=1C1GGLS_enUS310US310
Browse through some of the posts and see if you can come up with something. From what I have read the "Format All" is accomplished only via "Expert Mode" described above. If you can access that, then you might have a chance to restore the device.

egzthunder1 said:
Have you tried using the RUU after getting the device in bootloader mode? In other words, get it to this status, connect the USB cable to the computer (establish a connection), and then try to use the RUU.
Click to expand...
Click to collapse
Yup, the error appears just 5sec after pressing update button...
I guess the problem resides on the fact that gsmffs.nb0 file is missing from the rom, cause RUU log shows:
ClientDriver.dll Attach
g_Driver=0 g_RTimeout=0 g_WTimeout=0 g_DebugON=0 g_PurgeTx=0 g_PurgeRx=0 g_WaitRx=0 g_splitReadAck=0 g_splitReadAckSize=0
Client_QueueJob(): FeatureID=3, FileName=temp3, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_QueueJob(): FeatureID=3, FileName=temp2, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_QueueJob(): FeatureID=17, FileName=temp4, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_Initialize(): Model=(null), Language=0
Client_Initialize(): Skipping the model verification check
Client_Initialize(): Skipping the language check
Client_Initialize(): rebooting device...
Client_FormatDiskEx(): Type=3 Backup=c:\gsmffs.nb0
OpenComPort(): Wceusbsh
GetWceusbshDevicePreset
OpenComPort(): Wceusbsh \\?\usb#vid_045e&pid_00ce#5&1e9a0cb1&0&1#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
Windows Closing end
OpenComPort(): PC is XP plus
OpenComPort(): PC is XP plus
OpenComPort(): cto.RIT=0 cto.RTM=0 cto.RTC=0
OpenComPort(): cto.WTM=0 cto.WTC=0
OpenComPort(): sucessful
SendFormatDisk() cmd=3
GetEachROMSize(): GSM size=5242880
GetEachROMSize(): OS size=70254592
GetEachROMSize(): EXTROM size=1048576
SendFormatDisk():USBWritePacket
SendFormatDisk(): USBReadPacket
...
And then it hangs on the last command, it should return
SendFormatDisk(): receive format ok
ReadBackup(): Get a packet Remain=65536
...
I assume C:\ is on the pda not my computer right? I guess this file is missing. Very frustating since there's no tools available for my P527...

Look for a Rom dump from this device and see if you can find the missing file.
I think that the C:\ is actually in the computer. Even if the PDA is recognized as external storage, it would probably take a different letter (unless your HDD has a different letter assigned to it). But in bootloader mode, it is not recognized as storage.
Also, look for another RUU (for this device) and see if it works. Good luck

same problem
santosru said:
Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx
Click to expand...
Click to collapse
hi santosru,
i am also having same problem were you able to solve it? where you able to select the options?

Ok, this may not work for everyone but it worked for me. I CAN NOT take credit for any of the work. I can how ever offer a very sincere thank you to developers who have brought 6.5 to the P527.
Download SCHIST 21864 from http://forum.xda-developers.com/showthread.php?t=506417
use the P527FUU that is included and check both OS and GSM.
set the OS path to ????/SCHIST_21864_clean\flash.dio.nb0
set the GSM path to ????/SCHIST_21864\EXT GSM(IND)\GSM.dio.nb0
now you need your phone screen to show the IPL: USB Cable message.
turn key lock on, press in on the scroll wheel (left side of phone), press and release the soft reset button with stylus, release the scroll wheel and press the left OK button. it may take a times to get it right but you should get the IPL: screen up. (I actually have to release the scroll wheel then move it down, release and then press the OK button)
insert the usb cable, click the ???? button in P527FUU this should "fix" you.
after it's complete even if phone hangs at the blue Asus screen you can download the correct Asus flash and use the installed included from Asus in advanced mode to restore your phone to WM 6.1 for your area.
if this helps anyone let me know.
IMPORTANT: I just learned that the computer you flash with has something to do with the bad flash. I needed to reflash the original 6.1 back to my phone and it locked up again on my computer, I tried my girl friends and it worked fine using the above steps.

Help please: cant hard reset my WM5 Pocket PC

Good evening everyone - I spent all the afternoon trying to hard reset my ETEN G500+ WM5:
1) normal hard reset with hard keys: dont work (on a G500+ : power button /then/ soft reset button with the power button still pushed /then/ drop both at the same time)
2) Install hard reset .net software and run it: dont work
3) Install HardReset 1.0 and run it: dont work
4) Try to find Parameters/System/Clear Data but it doesn't exist on my WM5 (maybe deleted by an installed software, last time i did this to hard reset my G500+)
5) Try to find \Windows\ClearStorage.exe file but it doesn't exist
6) Try to leave my PPC for 1 hour without battery: only reset the hour to 12:00
=> can someone give me the ClearStorage.exe file or anything else to hard reset my Pocket PC ........ PLEASE

Done!
I finaly did find the solution (after manyxxxxxxx hours)
After the launch of the hard reset it is needed to stay pushed on the endcall button till a message comes out to enable the hard reset!
Thanks anyway for the ones who tried to find me the answer!

are you sure it works?? i've tried with mu o2 atom still only soft reset..any clue of it??

[Q] Samsung Galaxy pop,GT-S5570,android hanged

Guys ,
I am from Nepal.I have a set of Samsung Galaxy pop GT-S5570,android.I recently downloaded an application called "Viber" from android market.It did work but immediately after my phone got hanged.The main menu doesn't open and there is this continous message "The application Samsung Home <process com.sec.android.app.twlauncher> has stopped unexpectedly.Please try again."
I can acess to internet through the set and hav uninstalled "Viber" but still the problem remains.I cant format my phone as i cant access the menu or settings.My friend is using "viber" in his android LG set and he has no problems.I think its a virus in my internal memory.How can i solve this problem.If not how can I format my phone without opening the menu or the settings.
I would be very grateful if anyone could help me.

perform following
1. power off your device
2. once power off, press and hold menu button + power button
3. once enters recovery mode, navigate using volume up and down and select using middle button
4. wipe data and cache partition
5. reboot

Thanks a lot for your suggestion but it did not work.The same message keeps appearing in the home screen

Bro Same problem with me
I'm also from Nepal and i'm also having the same problem with my phone. What should i do now? What did you do?