Database Info

CHARMER PM200... have BIG PROBLEM..

I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile

Also tried to flash ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
But at 80% I get error..
ERROR [326] : INVALID COMMAND
This file cannot be used for your PDA Phone. Please check your NBF file

I had the same problem with my JAMin. I messed up trying to flash it with a home-made ROM and the tool used to build the ROM put two G4 SPLs instead of one G3 and one G4. This caused my G3 JAMin to have a G4 SPL. It wouldn't boot past the "rainbow screen" and the IPL and SPL levels were similar to what you have now.
The solution for me was to have it repaired under warranty :roll:

My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.

DrMobile said:
My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.
Click to expand...
Click to collapse
As I mentioned my JAMin was repaired under warranty. When it was returned to me they had replaced the main board. So it seems to be quite a problem to re-write the SPL if it has been flashed with the wrong type.
The new board has the G4 flash memory, so no more unlocking/downgrading adventures for me

DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.

shayd said:
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.
Click to expand...
Click to collapse
I allready tested your solution long time ago.. but its not working...
Br.

DrMobile said:
I allready tested your solution long time ago.. but its not working...
Br.
Click to expand...
Click to collapse
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work

DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Dear DrMobile,
I am facing the exact same problem like you.
Same Model, Same IPL/SPL & same events.
Its like I wrote all this.
Its my request as whenever you find ANY SOLUTION, please please please do let me KNOW.
Waiting.......
Thanks in advance.
DoCtOr_X...

shayd said:
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work
Click to expand...
Click to collapse
Hi,
Yes You may be right, we need a ROM with only G3 IPL/SPL or only G3 SPL and if we can force this G3 SPL (I think JAFWM can do it but not sure) into the phone the problem will be solved.
But Question is where can we find this "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" as it is not available on net, the file on FTP is corrupt.
"RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship" have both G3 & G4 IPL/SPL and when we write this ROM into phone it writes G4 IPL/SPL as Phone is detected having G4 by every software.
Otherwise the only option left is "JTAG" but only one guy (ARC but he lives in Russia) know the test points for Charmer.

I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL

mak_us1977 said:
I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL
Click to expand...
Click to collapse
Thanks for your Quick Reply, please tell us as which ROM version & which JAFWM version you used.
Thanks

i used rom JAMin_WWE_213923_2139123_022021 and JAFWM ver 2.2g

Thanks Man,
can u please confirm me that you had same problem of G4 SPl on G3 DOC.
Because JAFWM detects my phone as G4 DOC and the ROM you mentioned has both G3 & G4 SPL so I think It will try to write G4 SPL not G3.

sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again

Can Any GURU Out There Help Us????????????
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks

DoCtOr_X said:
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks
Click to expand...
Click to collapse
have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship"???
i have uploaded it to here: http://savefile.com/files/157293

Thanks Shayd
First of all Thank u very very much as I was not hoping to get such favour from any one so Thank You Again.
Yes I did give it a try, its not working with the message that "please get a new NBF"
I hope someday I may be able to use my Charmer Again.............

JAFWM (whatever this is) is not working (as mak_us1977 mentioned)?
BTW, how do you know if your machine is G3 or G4? By looking if your unit is P200 or P300? And to confirm,
SPL 2.06.0001 only works on G3?
SPL 2.15.0001 only works on G4?
Want to put this on the Wiki to avoid future similar problems

Just Want to Know if U had SPL 2.xx.0001
mak_us1977 said:
sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again
Click to expand...
Click to collapse
Dear mak....
Please let me know if you had SPL 2.xx.0001
This SPL is NASTY.

Help Plz Plz Plz

I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............

try several times...sure it will work

Which rom should i try the NVID one or my JAMin ROm

Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,

Fady said:
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Click to expand...
Click to collapse
Put the device into bootloader and flash with an official ROM.

The device only opens in bootloader now n by da way i cannot use my imate official Rom so which should i try now............

Try downloading the official i-mate Jamin ROM. When you've downloaded the ROM skip the first to steps. Before it checks the device reset the device so you will have an USB connection. If you wait to long the USB connection gets lost.

You did a mistake when you upgrade to the useless 3.08 IPL SPL, I think you have less feature now with official ROMs
You can't flash your phone with any official NBF (ROM) unless you unlock the CID, to downgrade IPL SPL
Unlock your CID I think you have a G3 device and you can install any ROM you want, if you don't what G3 mean, look what G device you have in the WIKI
If you have G4 the only solution is Extract the NBF and make a new one without IPL SPL and you can install any ROM you want
But you didn't brick your phone ask before any step you will make before you brick it

Yes i have a G3 device n how can i unlock the CID plz tell me the steps n I will do as you will say...............

Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................

look at this thread - it should help
http://forum.xda-developers.com/showthread.php?t=300356
also the first post on page 3 of that thread has a link to the instructions to CID unlock a G3
Good luck
Fady said:
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
Click to expand...
Click to collapse

I see ok lemme check the site.........

Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........

No - once you have upgraded ipl/spl you are stuck with them. Do not got to v 3.08!!!
Fady said:
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
Click to expand...
Click to collapse

Doesnt matter now if im stuck well it WORKED my JAMin is again alive Thanks a lot again for telling me the link n thanks a lot for helping everyone out with the nb2nb tools n stuff n all the instructions n thanks to everyone for their advices All u senior members rock...........................

Fady said:
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
Click to expand...
Click to collapse
try to upgrade to latest Radio Rom and then try to upgrade the latest rom u would see its running ok

Highes IPL/SPL Versions win!
If you have install IPL/SPL 3.08 ... no downgrade in the moment!

Wats the advantage of this IPL SPL 3.08
i have only seen one change n its that I cant get my imate rom back without editing it n removing IPl Spl from it...............

u try try this method.
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.

kaiser info

Can anyone give me a spanish rom for flash kaiser?
thank's Andrea

ciassi83 said:
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
Click to expand...
Click to collapse
I have dumped it from the device, and have Part0-3.raw files, but don't know if it's possible to reconstruct and flash without the original OS.NB file.
Any help? Can i reconstruct using Spanish dumped ROM using WWE nb-imgfs files?
Thanks in advance.
Regards.

I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!

ciassi83 said:
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
Click to expand...
Click to collapse
Well, if you don't want to loose your TyTN II, you only need to power on, and start to using. Sure works for the most of you use it.
This forum is only to learn and have fun with the kaiser. So if your Kaiser works, don't touch...only read the user guide and that's all.
Read a lot is the only way to learn how to keep your device working
Regards.

please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..

ciassi83 said:
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
Click to expand...
Click to collapse
If you want to get some help, you need to give more details about your problem (if exsit...).
What have you done before the error happen? What is the error? What happen when you power on the device? What ROM version? What is the start secuence?
Without this info anyone can help you, believe me, peopple here are not magicians

-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..

ciassi83 said:
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
Click to expand...
Click to collapse
Seems you have a briked kaiser... take a look at http://forum.xda-developers.com/showthread.php?t=334693 to see if helps you getting info about your kaiser CID version...
I suppose you have an Spanish Kaiser, right?
So seems the only way to recover is flashing spanish Kaiser ROM (that we haven't).
The other way is sending to repair...

Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..

ciassi83 said:
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
Click to expand...
Click to collapse
Yes, i have the same ROM, but the ROM is on my device, i have't the RRU file to upgrade your device...
I extracted the ROM, but for now don't know how to reconstruct it.
So you must wait or send to repair...

problem solved
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!

ciassi83 said:
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
Click to expand...
Click to collapse
Good news, mate.... congratulations....

jamin in bootloader mode..help

--------------------------------------------------------------------------------
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin.....in bootloader mode it shows
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
..i have tried installing imate original version too ..but it says it cant ..coz it it says it need new nbf file and sometime ...ask to check upgrade utility...whats the problem...help me

See my posts about that on the forum under prophet upgrading, if you have any questions ask me ok, bye

deltav13 said:
See my posts about that on the forum under prophet upgrading, if you have any questions ask me ok, bye
Click to expand...
Click to collapse
which post, I have the same problem...I'm going crazy.....

Error 300

i have Htc P4350
some one is crazy try to update ROM to W6,, i think he made Hard SPL
my device can't start up,, just on bootloder
message Error 300 when try install original V or any Rom
PLZ help me
IPL 1.08.0001
SPL 1.08.0001
sorry coz my English is bad

mano2008 said:
i have Htc P4350
some one is crazy try to update ROM to W6,, i think he made Hard SPL
my device can't start up,, just on bootloder
message Error 300 when try install original V or any Rom
PLZ help me
IPL 1.08.0001
SPL 1.08.0001
sorry coz my English is bad
Click to expand...
Click to collapse
1. Please follow the rules. This post has nothing with developing ROMs.
2. This is a very common problem. It has been answered many times. A little search with probably find you the answer: Create a Goldcard. Search for the term Goldcard and you will find a few walkthroughs on how to fix the phone. If you search the XDA-Wiki, you'll also find a walkthrough.
The walkthroughs for the Elf and Herald are identical. The walkthrough for the Dream is not the same but works the same anyways.