I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
try several times...sure it will work
Which rom should i try the NVID one or my JAMin ROm
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Fady said:
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Click to expand...
Click to collapse
Put the device into bootloader and flash with an official ROM.
The device only opens in bootloader now n by da way i cannot use my imate official Rom so which should i try now............
Try downloading the official i-mate Jamin ROM. When you've downloaded the ROM skip the first to steps. Before it checks the device reset the device so you will have an USB connection. If you wait to long the USB connection gets lost.
You did a mistake when you upgrade to the useless 3.08 IPL SPL, I think you have less feature now with official ROMs
You can't flash your phone with any official NBF (ROM) unless you unlock the CID, to downgrade IPL SPL
Unlock your CID I think you have a G3 device and you can install any ROM you want, if you don't what G3 mean, look what G device you have in the WIKI
If you have G4 the only solution is Extract the NBF and make a new one without IPL SPL and you can install any ROM you want
But you didn't brick your phone ask before any step you will make before you brick it
Yes i have a G3 device n how can i unlock the CID plz tell me the steps n I will do as you will say...............
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
look at this thread - it should help
http://forum.xda-developers.com/showthread.php?t=300356
also the first post on page 3 of that thread has a link to the instructions to CID unlock a G3
Good luck
Fady said:
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
Click to expand...
Click to collapse
I see ok lemme check the site.........
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
No - once you have upgraded ipl/spl you are stuck with them. Do not got to v 3.08!!!
Fady said:
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
Click to expand...
Click to collapse
Doesnt matter now if im stuck well it WORKED my JAMin is again alive Thanks a lot again for telling me the link n thanks a lot for helping everyone out with the nb2nb tools n stuff n all the instructions n thanks to everyone for their advices All u senior members rock...........................
Fady said:
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
Click to expand...
Click to collapse
try to upgrade to latest Radio Rom and then try to upgrade the latest rom u would see its running ok
Highes IPL/SPL Versions win!
If you have install IPL/SPL 3.08 ... no downgrade in the moment!
Wats the advantage of this IPL SPL 3.08
i have only seen one change n its that I cant get my imate rom back without editing it n removing IPl Spl from it...............
u try try this method.
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.
flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim
i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that
homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks
uve bricked ur phone im afraid, nothing that can be done to bring it back!
if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others
i tried the post but the same problem i am in bootloader as before
any new idea
I am trying to isntall a new rom from some availabe in the kitchen but when it it tries to start to write it just stuck on the 0% and have to reset it again. Even hardspl same problem !! its an att kaiser from america arrived few days ago from ebay.
Can someone help me out please !!!
Radio info :
kais1*0
spl-1.93.0000
cpld-8
DON'T try to install a custom ROM without installing Hard SPL first. If you have problems installing Hard SPL, read the hard SPL thread for more information.
Deo said:
I am trying to isntall a new rom from some availabe in the kitchen but when it it tries to start to write it just stuck on the 0% and have to reset it again. Even hardspl same problem !! its an att kaiser from america arrived few days ago from ebay.
Can someone help me out please !!!
Radio info :
kais1*0
spl-1.93.0000
cpld-8
Click to expand...
Click to collapse
Have you read the 2 stickied threads right at the top of the main page of this forum about Hard-SPL? If not, then you didn't install Hard- SPL first. And if you didn't install Hard-SPL (and according to your quote it does not look like you did), then you are lucky that you have not Bricked your Tilt yet!
Read the following links as well as the Kaiser wiki and search for more info.
Link1, Link2 and there is a 3rd thread in this forum that talks about Hard-SPL on devices with the newest drivers on them.
I tried to update HardSPL 3.29 on my friend's Kaiser from AT&T. But it still stucked.
I run SDA-Unlocker .It shows ok.
After serveral tries the phone stucked So i use Kaiser SuperCID and Security Unlocker v0.1 by ockyw2001SPL and do step 1. I don't know what i have exactly done.
During copy it stays at 95 % !
Now every time i boot the device it shows only the bootloader
KAIS1*0
SPL-3.56.0000
CPLD-8
Seial
I can't upgrade other ROM any more.
I think i should take HardSPL 3.56force USB ? because ATT already has SPL 3.56 and WM I 6.1
What have i to do now ? I'm a little confuse because the phone of my friends. That is the gift from his brother. :-(
read this then go to the sticky at the top of this forum and follow the links to the right thread for you to ask this in, good luck.
Ok ! I folow http://forum.xda-developers.com/showthread.php?t=420683
and tried to flash SPL 3.29 again. But it still stucked at 0%.
I will try the SD version.
Other question: should the battery loading at in bootloader ?
Hi,
Try re-flashing the stock ROM for the phone. You'll either find it on the wiki or on your carriers website.
Any more problems, please post in this thread : http://forum.xda-developers.com/showthread.php?t=423486 (after reading the 1st post o/c)
Dave
hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Also
I also have the same problem.... Please help us!!!
satyriasis said:
I also have the same problem.... Please help us!!!
Click to expand...
Click to collapse
hello
i found this thread http://forum.xda-developers.com/showthread.php?t=388109 and it gives a solution of the problem;but the tera term pro cant work here with me;it doesnt wanna connect even i uncheck the activesync pffff
froggatt said:
hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Click to expand...
Click to collapse
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
anubis_cray said:
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
Click to expand...
Click to collapse
I just replaced the OS. the information on the bootloader is as follows:
Tornado
IPL 1.00
Tornado
SPL 1.00.0007
Tornado IU
Is this enough information??
hello
here is w
hello all
here is wat shows my bootloader
tornado
ipl 2.00
tornado
SPL 2.00.0013
tornado iu
usb
and here are some stupid qestions,u said u replaced the OS ;how did u do it and wat is OS first.
annd y my tera term pro v.4 does not work;coz wen i connect the tornado;i run tera term pro and a page appears 196.168.1.3 AND wen i click on ok it says connecting,and after some seconds it says CONNECTION TIMED OUT ( by the way the activesync is disabled)
im waiting for ur help