hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Also
I also have the same problem.... Please help us!!!
satyriasis said:
I also have the same problem.... Please help us!!!
Click to expand...
Click to collapse
hello
i found this thread http://forum.xda-developers.com/showthread.php?t=388109 and it gives a solution of the problem;but the tera term pro cant work here with me;it doesnt wanna connect even i uncheck the activesync pffff
froggatt said:
hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Click to expand...
Click to collapse
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
anubis_cray said:
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
Click to expand...
Click to collapse
I just replaced the OS. the information on the bootloader is as follows:
Tornado
IPL 1.00
Tornado
SPL 1.00.0007
Tornado IU
Is this enough information??
hello
here is w
hello all
here is wat shows my bootloader
tornado
ipl 2.00
tornado
SPL 2.00.0013
tornado iu
usb
and here are some stupid qestions,u said u replaced the OS ;how did u do it and wat is OS first.
annd y my tera term pro v.4 does not work;coz wen i connect the tornado;i run tera term pro and a page appears 196.168.1.3 AND wen i click on ok it says connecting,and after some seconds it says CONNECTION TIMED OUT ( by the way the activesync is disabled)
im waiting for ur help
Related
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
try several times...sure it will work
Which rom should i try the NVID one or my JAMin ROm
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Fady said:
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Click to expand...
Click to collapse
Put the device into bootloader and flash with an official ROM.
The device only opens in bootloader now n by da way i cannot use my imate official Rom so which should i try now............
Try downloading the official i-mate Jamin ROM. When you've downloaded the ROM skip the first to steps. Before it checks the device reset the device so you will have an USB connection. If you wait to long the USB connection gets lost.
You did a mistake when you upgrade to the useless 3.08 IPL SPL, I think you have less feature now with official ROMs
You can't flash your phone with any official NBF (ROM) unless you unlock the CID, to downgrade IPL SPL
Unlock your CID I think you have a G3 device and you can install any ROM you want, if you don't what G3 mean, look what G device you have in the WIKI
If you have G4 the only solution is Extract the NBF and make a new one without IPL SPL and you can install any ROM you want
But you didn't brick your phone ask before any step you will make before you brick it
Yes i have a G3 device n how can i unlock the CID plz tell me the steps n I will do as you will say...............
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
look at this thread - it should help
http://forum.xda-developers.com/showthread.php?t=300356
also the first post on page 3 of that thread has a link to the instructions to CID unlock a G3
Good luck
Fady said:
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
Click to expand...
Click to collapse
I see ok lemme check the site.........
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
No - once you have upgraded ipl/spl you are stuck with them. Do not got to v 3.08!!!
Fady said:
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
Click to expand...
Click to collapse
Doesnt matter now if im stuck well it WORKED my JAMin is again alive Thanks a lot again for telling me the link n thanks a lot for helping everyone out with the nb2nb tools n stuff n all the instructions n thanks to everyone for their advices All u senior members rock...........................
Fady said:
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
Click to expand...
Click to collapse
try to upgrade to latest Radio Rom and then try to upgrade the latest rom u would see its running ok
Highes IPL/SPL Versions win!
If you have install IPL/SPL 3.08 ... no downgrade in the moment!
Wats the advantage of this IPL SPL 3.08
i have only seen one change n its that I cant get my imate rom back without editing it n removing IPl Spl from it...............
u try try this method.
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
To upgrade the phone to wm6,its required to be SIM/CID unlocked,read the unlocking and upgrading threads in the 'Wizard Upgrading' forum posted as 'Stickies'.After CID unlocking,you'll be able to upgrade to wm6.
thanks a lot
trippo said:
thanks a lot
Click to expand...
Click to collapse
Your most welcome
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
delower10 said:
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
Click to expand...
Click to collapse
Did you SIM/CID unlocked your device?
janneman22 said:
Did you SIM/CID unlocked your device?
Click to expand...
Click to collapse
i know sim unlocked but i don't know about cid bcoz when i appear this phone was stuck on bootloader
please tell me how can i recover this ?
it isn't very difficult to install. Look around for instructions (Soft/HardSPL thread).
How do you flash with the bootloader showing?
My Wizard 200 only comes up in Bootloader screen.
ActiveSync does not connect with it.
When I run the rom upgrade it tells me it can not find it.
So how do I get it to boot normally again?
This happened while flashing a rom....
Thank You in advance.
there is no problem, just connect your wizard in bootloader mode and run RUU to make the hard spl or soft spl
--------------------------------------------------------------------------------
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin.....in bootloader mode it shows
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
..i have tried installing imate original version too ..but it says it cant ..coz it it says it need new nbf file and sometime ...ask to check upgrade utility...whats the problem...help me
See my posts about that on the forum under prophet upgrading, if you have any questions ask me ok, bye
deltav13 said:
See my posts about that on the forum under prophet upgrading, if you have any questions ask me ok, bye
Click to expand...
Click to collapse
which post, I have the same problem...I'm going crazy.....
Hi dear
when i am trying to upgrade my SDA II i got problem it's go until 76% and stopped please you solutions
My Email is : m.lwila#gmail.com
If I remember correctly SDA II is not HTC Tornado.
Yes it's SDAII
I want the ROM for this mobile ti's from T-Mobile
This is link for the Mobile but the rom that posted didnot work with my phone
http://www.tm-phonedownloads.com/sd_sda2.html
thanks
M.lwila
nav1 said:
If I remember correctly SDA II is not HTC Tornado.
Click to expand...
Click to collapse
SDA II(US) is HTC Tornado...but I dont know the reason of priblem(
no it's not htc tor.. it's sdaII
m.lwila said:
no it's not htc tor.. it's sdaII
Click to expand...
Click to collapse
Please tell us what your phone says on the bootloader screen.
when i am trying to upload th rom to the sdaII that i download it from T-Mobile web site it's give me invailed vendor
Do you know how to place your phone on BootLoader? I'll explain an easy way. Turn off your phone. With phone off, hold the Camera buton depressed and plug in the usb cable. The phone will turn on with a Red Green Blue screen. on that screen it will have some information... Example:
Tornado
IPL 2.00
SPL 2.00.0014
USB
Please provide that info so we know if your SDAII is Tornado or Typhoon. Then we can hopefully help you from there on.
this is code error "ERROR [294] INVAILD VENDER ID "
markanthonypr said:
Please tell us what your phone says on the bootloader screen.
Click to expand...
Click to collapse
m.lwila said:
when i am trying to upload th rom to the sdaII that i download it from T-Mobile web site it's give me invailed vendor
Click to expand...
Click to collapse
markanthonypr said:
Do you know how to place your phone on BootLoader? I'll explain an easy way. Turn off your phone. With phone off, hold the Camera buton depressed and plug in the usb cable. The phone will turn on with a Red Green Blue screen. on that screen it will have some information... Example:
Tornado
IPL 2.00
SPL 2.00.0014
USB
Please provide that info so we know if your SDAII is Tornado or Typhoon. Then we can hopefully help you from there on.
Click to expand...
Click to collapse
m.lwila said:
this is code error "ERROR [294] INVAILD VENDER ID "
Click to expand...
Click to collapse
I still don't read the answer. I wish you best luck.
IPL 1.00.15
SPL 1.00.68
I wanna to hack this version
plz help me to install the ROm
Hurricane
IPL 1.00.15
SPL 1.00.68