i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
To upgrade the phone to wm6,its required to be SIM/CID unlocked,read the unlocking and upgrading threads in the 'Wizard Upgrading' forum posted as 'Stickies'.After CID unlocking,you'll be able to upgrade to wm6.
thanks a lot
trippo said:
thanks a lot
Click to expand...
Click to collapse
Your most welcome
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
delower10 said:
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
Click to expand...
Click to collapse
Did you SIM/CID unlocked your device?
janneman22 said:
Did you SIM/CID unlocked your device?
Click to expand...
Click to collapse
i know sim unlocked but i don't know about cid bcoz when i appear this phone was stuck on bootloader
please tell me how can i recover this ?
it isn't very difficult to install. Look around for instructions (Soft/HardSPL thread).
How do you flash with the bootloader showing?
My Wizard 200 only comes up in Bootloader screen.
ActiveSync does not connect with it.
When I run the rom upgrade it tells me it can not find it.
So how do I get it to boot normally again?
This happened while flashing a rom....
Thank You in advance.
there is no problem, just connect your wizard in bootloader mode and run RUU to make the hard spl or soft spl
Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
hey,i wanted to upgrade to wm6 so i tried to unlock the phone with sda unlock application,but it keeps telling me the phone is not unlockable.
and other thing, i tried to update to the newest rom,mine is old(the one that came with the phone)and when the update utility start it crashed on 0% and an error report appeared on the screen,and the phone will stay in bootloader till i reboot,i tried the unlocking and the update more than 10 times,does anyone know what to do ?
thanx in advane
your device is not application-unlocked. run htcunlock-cvs first then sda application unlock.
thanx a lot man
muayad said:
thanx a lot man
Click to expand...
Click to collapse
no problem mate.
Hi,
I want to upgrade mine WM6.5 (to newer build-version). Before that I have to downgrade to WM5 before installing newer WM6.5. I've got Xda_Minis_Upgrade_v2.21.4.101.exe unfortunatelly it stops with following text
ERROR [294]: INVALID VENDER ID
Click to expand...
Click to collapse
. And on the screen of my device there is only 3 color-bars with IPL&SPL versions (2.21.0001) and at the bottom "USB".
What now? Probably just wrong ROM? I thought this is the right rom since its for O2 XDA mini S and mine is from O2.
cu Floh
This fixed all my of my G4 problems, if you trouble with the instructions let me know
Do you mean I should change IMEI?!?
Eyes-Killer said:
Do you mean I should change IMEI?!?
Click to expand...
Click to collapse
Yes that is one of the steps
Sorry I just noticed you might be stuck in boot loader mode
If that’s the case download and install “Wizard Love ROM"
I downloaded the ROM directly from O2-provider (instead one from here). Now I'm on WM5.
-MyHTC- said:
Sorry I just noticed you might be stuck in boot loader mode
Click to expand...
Click to collapse
I noticed that, this is why I was wondering, why I should change my IMEI.
But thank you!
cu Floh
Good to hear you got it going.
I will post clear instructions on what ive found on CID unlocking the G4 in the G4 thread.
hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Also
I also have the same problem.... Please help us!!!
satyriasis said:
I also have the same problem.... Please help us!!!
Click to expand...
Click to collapse
hello
i found this thread http://forum.xda-developers.com/showthread.php?t=388109 and it gives a solution of the problem;but the tera term pro cant work here with me;it doesnt wanna connect even i uncheck the activesync pffff
froggatt said:
hello
this tornado c6oo is driving me in sane;i tried to upgrade it with a 6.1 rom;everything was goin ok untill the upgrading got finished then the smartphone restarted and went stuck on bootloader;i restarted it hundreds of times but nothing new;alllways in bootloader mode,plsssss help;i really need ur help coz i have no other phone at the moment wa333333
thank u,im sure u won't disappoint me
Click to expand...
Click to collapse
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
anubis_cray said:
hi, did you also replace radio rom or spl? the good news is that your device's ipl its's ok since you can get in bootloader mode, btw, please post here the bootloader informations
Click to expand...
Click to collapse
I just replaced the OS. the information on the bootloader is as follows:
Tornado
IPL 1.00
Tornado
SPL 1.00.0007
Tornado IU
Is this enough information??
hello
here is w
hello all
here is wat shows my bootloader
tornado
ipl 2.00
tornado
SPL 2.00.0013
tornado iu
usb
and here are some stupid qestions,u said u replaced the OS ;how did u do it and wat is OS first.
annd y my tera term pro v.4 does not work;coz wen i connect the tornado;i run tera term pro and a page appears 196.168.1.3 AND wen i click on ok it says connecting,and after some seconds it says CONNECTION TIMED OUT ( by the way the activesync is disabled)
im waiting for ur help