Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
To upgrade the phone to wm6,its required to be SIM/CID unlocked,read the unlocking and upgrading threads in the 'Wizard Upgrading' forum posted as 'Stickies'.After CID unlocking,you'll be able to upgrade to wm6.
thanks a lot
trippo said:
thanks a lot
Click to expand...
Click to collapse
Your most welcome
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
delower10 said:
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
Click to expand...
Click to collapse
Did you SIM/CID unlocked your device?
janneman22 said:
Did you SIM/CID unlocked your device?
Click to expand...
Click to collapse
i know sim unlocked but i don't know about cid bcoz when i appear this phone was stuck on bootloader
please tell me how can i recover this ?
it isn't very difficult to install. Look around for instructions (Soft/HardSPL thread).
How do you flash with the bootloader showing?
My Wizard 200 only comes up in Bootloader screen.
ActiveSync does not connect with it.
When I run the rom upgrade it tells me it can not find it.
So how do I get it to boot normally again?
This happened while flashing a rom....
Thank You in advance.
there is no problem, just connect your wizard in bootloader mode and run RUU to make the hard spl or soft spl
This may be a little long winded but !!
I am the proud! owner of a Vodafone badged Touch Pro, now probably a brick.
I think you can see whats comming.
Having read through the info on flashing ROM, I followed the guide ie instal Hard SPL then radio then flash the rom.
The Hard SPL went fine and reported 1.40.OliNex on the boot loader screen.
I didn't upgrade the radio so went straight on to the ROM flash following the instructions from http://forum.xda-developers.com/showthread.php?t=416211
All appeared well until the reboot where the phoone freezes on the network logo screen.
I can get onto the boot loader screen and rightly or wrongly have managed to get the SPL back to 1.90.0000.
But that is it.
Is there any hope or do I now have a rather expencive paper weight
(I have searched the site but I can't find anything which quite matches my problem).
I thought it was supposed to be 1.90.OliNex
Can you flash any other om over it?
Azzaroth said:
Having read through the info on flashing ROM, I followed the guide ie instal Hard SPL then radio then flash the rom.
The Hard SPL went fine and reported 1.40.OliNex on the boot loader screen.
Click to expand...
Click to collapse
Why did you flash HardSPL for Diamond on your Touch Pro?
Very good question.
Must have had a brain dump, but whats done is done. The only question is there anyway back?
Have you tried to flash some ROM to the phone? You can do that from the bootloader.
I'm vary wary of flashing it again unless it is with a known good ROM that is for the Touch Pro.
Any examples or ideas would be welcome
Of course, the best ROM is latest official, you can get it here - http://www.genghis.be/_HTC Touch Pr...igned_Raphael_52.58.25.30_1.11.25.01_Ship.rar, or on HTC official page - http://www.htc.com/www/SupportDownload.aspx?p_id=140&cat=2&dl_id=501.
Can you get it into bootloader? I doubt it, but that may be your only hope. Flashing the wrong hard spl is a sure way to kill your phone.
have you tried? http://www.ppcgeeks.com/forum.ppcgeeks/showthread.php?t=42503&highlight=hard+spl+touch+pro
jpwhre said:
have you tried? http://www.ppcgeeks.com/forum.ppcgeeks/showthread.php?t=42503&highlight=hard+spl+touch+pro
Click to expand...
Click to collapse
Why are you posting that link? You want him to really brick his device or what? Can't you see that he has a GSM device, not CDMA? Do you know that flashing CDMA SPL on GSM device means bricked device? Don't post if you don't know basic things, please!
Farmer Ted said:
Can you get it into bootloader? I doubt it, but that may be your only hope. Flashing the wrong hard spl is a sure way to kill your phone.
Click to expand...
Click to collapse
Thanks for all the info I'll get on to it ASAP.
In answer to boot loader screen, yes I can get on to it.
The http://www.htc.com/www/SupportDownlo...at=2&dl_id=501. link.
When I enter my serial number it returns"Sorry, this software download is not suitable for your device".
image
http://forum.xda-developers.com/showthread.php?t=427507
i uploaded the vodafone image a while ago so it sould stil be there if not pm and i cann attach a link for you,
might be worth tryingto flash from your sd card
good luck
The image is still there file:///E:/Desktop/ROM/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphael_CRC_52.33.25.17_1.02.25.19_Ship.exe
However it returns a 294 error (Invalid Vendor ID).
Azzaroth said:
The http://www.htc.com/www/SupportDownlo...at=2&dl_id=501. link.
When I enter my serial number it returns"Sorry, this software download is not suitable for your device".
Click to expand...
Click to collapse
Yes, I forgot that your serial number indicates that you have a Vodafone branded phone, and that ROM is for non-branded phones. Try the other link, no need for serial numbers.
I just tried the other link but this returned the 249 error (Invalid Vendor ID)
Azzaroth said:
I just tried the other link but this returned the 249 error (Invalid Vendor ID)
Click to expand...
Click to collapse
I assume that your not Hard SPL-ed properly then.
I'd go along with that. At the mo the boot loader reads:
RAPH100
SPL-1-90-0000
MicroP Raph (LED) v13
MicroP Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
If thats of any help?
Well, since there's no mention of Olinex at the bootloader, you're not Hard SPL-ed. I don't know is it possible to flash Hard SPL from bootloader (think not), so I recommend that you first flash a Vodafone ROM from here - http://rapidshare.com/files/244098894/Vodafone_uk_5_10_161_1_WWE.7z.html (and here is the thread - http://forum.xda-developers.com/showthread.php?t=518937&highlight=vodafone+rom), and then, with fully functional phone, you can do a Hard SPL by following instructions here - http://forum.xda-developers.com/showthread.php?t=410150. After that you should be able to flash ROMs as you wish, but they have to be for Touch Pro GSM. Here is the thread you should read after flashing Hard SPL - http://forum.xda-developers.com/showthread.php?t=448008.
Edit: found another Vodafone ROM, if you fail flashing the first one, you can try this - http://rapidshare.com/files/147978863/vodafone.rar.html.
I'll give it a go, the phone was HardSPL'd but reverted to the stock, which has probably compounded the problems.
help!!!!!!!!!!!!
kindly let me know if I can install RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.3 2.19.23_2_15.42.32_RETAIL_ENC_RELEASE.exe
in my HTC T-MOBILE DE 8X with CID MOB-001?
bootloader (175731)
I await response. thanks
priologiacomo said:
help!!!!!!!!!!!!
kindly let me know if I can install RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.3 2.19.23_2_15.42.32_RETAIL_ENC_RELEASE.exe
in my HTC T-MOBILE DE 8X with CID MOB-001?
bootloader (175731)
I await response. thanks
Click to expand...
Click to collapse
Based on your bootloader version, I don't think you can, but I might be wrong.
What Windows Phone version are you running?
As of yet, there's no way to flash an RUU version 2.00.401.03 on a phone that has a greater version installed (if you've installed any updates, you'll have a greater version).
IF you could flash, you would first need to debrand your phone first (search for ACDU fix for that), since the RUUs that have been released are straight from HTC, with no carrier modifications and they would fail to flash on a branded phone.
Potis20 said:
Based on your bootloader version, I don't think you can, but I might be wrong.
What Windows Phone version are you running?
As of yet, there's no way to flash an RUU version 2.00.401.03 on a phone that has a greater version installed (if you've installed any updates, you'll have a greater version).
IF you could flash, you would first need to debrand your phone first (search for ACDU fix for that), since the RUUs that have been released are straight from HTC, with no carrier modifications and they would fail to flash on a branded phone.
Click to expand...
Click to collapse
ok this is the situation. I wanted to know if it was possible to install the rom suitable to remove the logo T-MOBILE and have the cid 11111111
thanks await response.
priologiacomo said:
ok this is the situation. I wanted to know if it was possible to install the rom suitable to remove the logo T-MOBILE and have the cid 11111111
thanks await response.
Click to expand...
Click to collapse
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Potis20 said:
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Click to expand...
Click to collapse
ok thanks more.
Potis20 said:
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Click to expand...
Click to collapse
I pm xboxmod and he told me tried to flash uefi.nbh until got uefi error.But I tried all the nbh I could find on the Internet,failed.Now,no one knows how to disable OS version check except htc
fengsam said:
I pm xboxmod and he told me tried to flash uefi.nbh until got uefi error.But I tried all the nbh I could find on the Internet,failed.Now,no one knows how to disable OS version check except htc
Click to expand...
Click to collapse
Have you tried the nbh in the ACDU fix? That one caused my device to show a uefi provision error.
Potis20 said:
Have you tried the nbh in the ACDU fix? That one caused my device to show a uefi provision error.
Click to expand...
Click to collapse
That key.nbh?I tried just say 'Image version less than Device version''
fengsam said:
That key.nbh?I tried just say 'Image version less than Device version''
Click to expand...
Click to collapse
Hmm, I guess whatever that nbh flashes has been updated.
I can't understand why they decided to have that check in place... if I flash a stock RUU, it shouldn't matter what was previously running on the device, it should flash everything back to stock. Why do they make this so user un-friendly?
Potis20 said:
Hmm, I guess whatever that nbh flashes has been updated.
I can't understand why they decided to have that check in place... if I flash a stock RUU, it shouldn't matter what was previously running on the device, it should flash everything back to stock. Why do they make this so user un-friendly?
Click to expand...
Click to collapse
yep,but htc8s don't have this check.In China,someone leaks the official gdr3 ruu for htc c620d(cdma) to repair the bricked phone.My phone is security unlocked,so I tried it,failed.
HI all !
I have the same problem i can't use my phone and i can't downgrade it.
PM232002 P S WP I
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI -0.0.3030.0(175731)
OS-4.12.401.01
eMMC SMS 14910 MB F-15
CID-HTC_032
Radio-1.20b.32.19.04_15.67b.32.19
MSM8260A v 3.2.1-p1
If i try use RUU.exe phone reboot on 1% and i had error 270
If i try to use Y-connector i have error what my version is higher , or this error DongLeFail:CheckDeviceImage Signature Error.
Can you help me ?
Thanks