Hi - I'm trying to unlock my sim for an Orange Tytn II but notice that with the unlocker I will lose my radio 1.27.12.29 and need to reinstall it.
I have looked around the site but cannot find it anywhere.
1) If it is out there, could some kind person point me in the right direction.
2) If not, how do I copy - dump down and then reload it to my TyTnII
Many thanks,
richardS said:
Hi - I'm trying to unlock my sim for an Orange Tytn II but notice that with the unlocker I will lose my radio 1.27.12.29 and need to reinstall it.
I have looked around the site but cannot find it anywhere.
1) If it is out there, could some kind person point me in the right direction.
2) If not, how do I copy - dump down and then reload it to my TyTnII
Many thanks,
Click to expand...
Click to collapse
if you look at the top of the forum there is a sticky.....
http://forum.xda-developers.com/showthread.php?t=349375
The link for the radio doesn't work. Why do people just post comments without checking the details of the answers?
.................
excuse me mister.....
pneste said:
The link for the radio doesn't work. Why do people just post comments without checking the details of the answers?
Click to expand...
Click to collapse
Well you should be a little more appreciative that he actually responded to such a quesiton. Take that radio he pointed you to and do a search.
I have followed these links earlier...
What I found was a Dutch Rom download (which I have downloaded). Am I to assume that the radio that I mentioned earlier in this thread can somehow be extracted from the Rom? All I can see is Part00.raw etc....hardly fills me with confidence....I am not Dutch so have no interest in loading up a Dutch Rom in it's entirity.
Sorry to sound so dumb, but dumping the Rom from my Orange phone sounds immensely complicated and was hoping that there was a simple way to get hold of the Radio and load it back in.
Or...A simple way to unlock my phone and make it Sim agnostic...if ya get my drift...
richardS said:
Hi - I'm trying to unlock my sim for an Orange Tytn II but notice that with the unlocker I will lose my radio 1.27.12.29 and need to reinstall it.
I have looked around the site but cannot find it anywhere.
1) If it is out there, could some kind person point me in the right direction.
2) If not, how do I copy - dump down and then reload it to my TyTnII
Many thanks,
Click to expand...
Click to collapse
Yes, the unlock procedure states that you need to flash back your original Radio. But as you rightly say, you can't because it isn't available anywhere.
Don't worry. You don't actuall need to reinstall 1.27.12.29. I unlocked mine, flashed the standard HTC ROM to it and then flashed 1.27.12.17 and it works like a charm. If anything, I find that the battery life is a bit better with .12.17
I'm sure that .12.29 will become available at some point. Unless you specifically need it for a warranty return then I wouldn't worry about not having it and perhaps flash .12.17 to it instead.
Okeydokes, thanks for that. I don't yet need my phone unlocked, so may hold off for a bit until I can be sure that if I need to I can reload the original radio.
I noticed on another thread -
http://forum.xda-developers.com/showthread.php?t=337066
that there is a full ROM for the UK-Orange TyTn II -(UK Orange 1.81.61.2) but was unsure if this was an exact copy...which would pass the "warranty" chaps... I'm also not quite sure how you put it in...but I'm sure many hours more reading will tell me how to do that....
Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards
which roms? ipl spl versions,device model?
Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.
I have the same problem...
Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.
TmKing, can you explain your method and the you ROM you used ?
Thank You
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
This also works
TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!
Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.
Sorry guys & gals. New to this but cannot get a handle on the right thing to do. Can anybody help? Yes have read the basics but its not basic to me I am afraid.
I have got an HTC TYTNII from Orange. Need to unlock the sim card lock. Then would like to clear out all the Orange rubbish with a rom flash I think its called (havent got all the words right just yet). However as I paid a few quid forthe phone do not really wish to stew it!! If you know what I mean Harry! Cannot find hardspl etc on so on have ativesync fitted and running. All help greatly appreciated.
This webpage has a ton of files that have been extremely helpful to me so far...
http://duttythroy.lives-in.eu/
dont really know how to help
but
if you want to use hardspl is on the sticky thread
activesync can be downloaded from ms depending on the os you are using.
if you want more help tell me what you need and i will guide you
satiros
Lots of reading
I suggest you do lots more reading.
However, as a starter, go to :
http://www.imei-check.co.uk/kaiser-unlock.php
Pay for the unlocking service.
Then, and only then, install HardSPL
Following that, you can install any ROM you like (for Kaiser / TYTN II)
If you install a ROM based on Windows Mobile 6.1, chances are you will have to install a new Radio coding too. You should install the one for UK Vodaphone on :
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Don't worry, it works on Orange, I have it on mine.
I recommend the Alex ROM even though it is still a Beta version, it is very good.
After you install the ROM and done a hard reset (keep both soft buttons pressed down whilst pressing the reset button with your stylus) install the radio, then do another hard reset.
Bingo, it's like a different phone.
Thanks for the info have carried out the first bit awaiting reply. Where can I download HardSPL please? Having looked at your recommended ROMs Which one?.. wow some cooking I can see I will be Flashing all day!!
cloudbasher said:
... Where can I download HardSPL please?
Click to expand...
Click to collapse
if you cannot look & find it right there in one of the sticky threads of this forum ... I'd suggest you do not attempt any flashing to your device !!!
as some of those stickies contained mandatory informations that you need to READ THOROUGHLY !!!
Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)
... I forgot
... to mention that I had a WM5-device and I would like to have a WM6-device. That was the main reason for the flash-attempt.
Thanx in advance!
Gert Beckers
It happen to me too I did some search and found that you need to download mtty I thing 1.6 select usb and there was two command you have to exeute and it should work for some reason you can't flash the rom to it from sd on 193. I will try to get you the command later if you haven't found them in here . good luke. let me know how you make out.
regards
Possible solution...
Hi!
The same thing happend to me two days ago.
The only solution is to install the original "Shiped ROM". Try with this one, because mine TyTN II rejected every other with error "Invalid Vendor":
http://www.asia.htc.com/download/RU..._radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe
Good Luck!
Thank you for your quick reply!
Indeed, I forgot to mention that I already tried th MTTY. When I start the application and try to open the USB, it says 'USB will not open'.
I tried it also on another PC, just to be on the safe side, same result
No luck there.
I suspect the solution is to be found in the numbers!?
Kind regards,
Gert Beckers
Mmm,
Vladb,
Thank you for your quick response!
But, when I install the original shipped ROM, shouldn't it be the same version? Your link is clearly another version!
Could you send me a link with some more versions? Maybe European ones (english).
Sir Thanks-a-lot,
Gert Beckers
Hi,
Try searching this forum for "tri color" no quotes, there should be enough responses there to get you started.
Ta
Dave
Actualy this is WWE English version for phones from Hong Kong. I bought mine in the U.S, but since it was ment for Asia, this is the link you need. Also, this is updated ROM... your original was: 1.56.XXXX, and this is 1.82.XXXX
I saw from your first post that you have the same version like I do.
Try it,
Best regards!
BTW, mine is up and running, and more stable!
vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers
Picture of the vendor ID
GertBeckers said:
vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers
Click to expand...
Click to collapse
See my other post above, but also, your original ROM is can be dowloaded here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Download and flash that. Once you back in Windows Mobile, see the stop sticky on this forum, in post #2 there are clear steps on flashing Hard SPL.
Thanks
Dave
Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers
OK... the next thing I would try is to download shiped ROM's from: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
and try to install one by one.
That is if you don't know your phone region.
If you do know...
Good Luck!
GertBeckers said:
Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers
Click to expand...
Click to collapse
I don't know which one will help you most, but if you ensure the thread in the "Kaiser ROM Development" forum, you'll just have to skim read them to see which ones have a solution at the bottom and see if the symptoms match yours.
From skim reading the posts myself, flashing the ROM I gave you should let you back into Windows Mobile. Once there you "MUST" flash Hard SPL, before trying anything else. (Instructions & FAQ are in the Hard SPL sticky post #2).
Thanks
Dave
Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!
GertBeckers said:
Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!
Click to expand...
Click to collapse
Glad I could help. And now I know how to help people with "Stuck at Tri Colour Screen" problems. You learn something new every day.
Ta
Dave
GertBeckers said:
Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)
Click to expand...
Click to collapse
Did I miss the part where you flashed HardSPL? Because it's not listed in your steps above. Flashing a ROM with JumpSPL is just begging for this to happen.
I've added my steps to fix this to the Wiki at http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader.
This has been linked to on the on the ROM Upgrading section of the HTC_Kaiser page and the ROM Flashing FAQ page.
Ok so I have some what of a similar problem...
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?
kjb86 said:
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?
Click to expand...
Click to collapse
Try flashing your original shipped ROM.
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
HardSPL Info
kingsizeriz said:
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
Click to expand...
Click to collapse
I think most of the info, and donwload links that you're looking for are at the following link below. Hope that helps you.
http://forum.xda-developers.com/showthread.php?t=498320
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
HardSPL
kingsizeriz said:
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
Click to expand...
Click to collapse
I don't believe anything has changed in regards to installing a HardSPL to a phone. I've been following the same procedures for the last year or two. The Jump Spl files are used when changing / updating your HardSPL via ActiveSync (the only way I do it). Following the instructions on the thread below works like a charm, I've never had a problem. The instructions say HardSPL v3.29, but you can use any of the current HardSPL's just the same.
http://forum.xda-developers.com/showthread.php?t=433835
Fair enough, as im used to just hardspl'ing the device rather than jumpspl then hardspl.. will do it by the book though when i get my new one (if i manage to sell my poxy blackberry!!!)
All the SPL types are on the SPL Questions wiki page in detail, so I'll save myself repeating.
The reason for the 1.* and 3.* different SPL versions is for WM 6.0 and 6.1 respectivly.
See my Hard SPL sticky for another breif overview.
Dave