Bricked HTC TyTn II - RGB-screen!! - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)

... I forgot
... to mention that I had a WM5-device and I would like to have a WM6-device. That was the main reason for the flash-attempt.
Thanx in advance!
Gert Beckers

It happen to me too I did some search and found that you need to download mtty I thing 1.6 select usb and there was two command you have to exeute and it should work for some reason you can't flash the rom to it from sd on 193. I will try to get you the command later if you haven't found them in here . good luke. let me know how you make out.
regards

Possible solution...
Hi!
The same thing happend to me two days ago.
The only solution is to install the original "Shiped ROM". Try with this one, because mine TyTN II rejected every other with error "Invalid Vendor":
http://www.asia.htc.com/download/RU..._radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe
Good Luck!

Thank you for your quick reply!
Indeed, I forgot to mention that I already tried th MTTY. When I start the application and try to open the USB, it says 'USB will not open'.
I tried it also on another PC, just to be on the safe side, same result
No luck there.
I suspect the solution is to be found in the numbers!?
Kind regards,
Gert Beckers

Mmm,
Vladb,
Thank you for your quick response!
But, when I install the original shipped ROM, shouldn't it be the same version? Your link is clearly another version!
Could you send me a link with some more versions? Maybe European ones (english).
Sir Thanks-a-lot,
Gert Beckers

Hi,
Try searching this forum for "tri color" no quotes, there should be enough responses there to get you started.
Ta
Dave

Actualy this is WWE English version for phones from Hong Kong. I bought mine in the U.S, but since it was ment for Asia, this is the link you need. Also, this is updated ROM... your original was: 1.56.XXXX, and this is 1.82.XXXX
I saw from your first post that you have the same version like I do.
Try it,
Best regards!
BTW, mine is up and running, and more stable!

vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers

Picture of the vendor ID

GertBeckers said:
vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers
Click to expand...
Click to collapse
See my other post above, but also, your original ROM is can be dowloaded here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Download and flash that. Once you back in Windows Mobile, see the stop sticky on this forum, in post #2 there are clear steps on flashing Hard SPL.
Thanks
Dave

Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers

OK... the next thing I would try is to download shiped ROM's from: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
and try to install one by one.
That is if you don't know your phone region.
If you do know...
Good Luck!

GertBeckers said:
Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers
Click to expand...
Click to collapse
I don't know which one will help you most, but if you ensure the thread in the "Kaiser ROM Development" forum, you'll just have to skim read them to see which ones have a solution at the bottom and see if the symptoms match yours.
From skim reading the posts myself, flashing the ROM I gave you should let you back into Windows Mobile. Once there you "MUST" flash Hard SPL, before trying anything else. (Instructions & FAQ are in the Hard SPL sticky post #2).
Thanks
Dave

Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!

GertBeckers said:
Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!
Click to expand...
Click to collapse
Glad I could help. And now I know how to help people with "Stuck at Tri Colour Screen" problems. You learn something new every day.
Ta
Dave

GertBeckers said:
Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)
Click to expand...
Click to collapse
Did I miss the part where you flashed HardSPL? Because it's not listed in your steps above. Flashing a ROM with JumpSPL is just begging for this to happen.

I've added my steps to fix this to the Wiki at http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader.
This has been linked to on the on the ROM Upgrading section of the HTC_Kaiser page and the ROM Flashing FAQ page.

Ok so I have some what of a similar problem...
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?

kjb86 said:
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?
Click to expand...
Click to collapse
Try flashing your original shipped ROM.

Related

Desperate QTek owner.

Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver
Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.
I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?
Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).
Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz
Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.
why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........
Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...
ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......

Wont Boot

I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck

Need WM6 Underground

Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005

AT&T Tilt Stuck in Boot Loader

First off I'd like to apologize for what must seem like a duplication of a thousand other "stuck in boot loader" threads, but I've got what appears to be a fairly unique situation here and none of the fixes I've found searching the forum have worked for me.
Yesterday I flashed Dutty's WM6.1 ROM using JumpSPL, everything went fine. Today I went to install one of Niki's radios using JumpSPL again, but it got stuck at 99%. I went through the recovery process (several times) and each time after that got stuck at 0%. I've tried soft and hard resets, every time it comes back to the tricolor boot loader. MTTY doesn't give me the USB port option, even if I disable any and all tasks related to Mobile Device Center. Stock AT&T ROM won't load, says "This update utility cannot be used for your PDA phone." I can't flash HardSPL, after I hit enter it doesn't do anything. I tried the Vista fix available on Modaco, but it's not compatible with 64-bit Vista so I'm SOL there too. I'm really at wits end here, could someone please point me in the right direction? I've read time and time again here that as long as you still get the tricolor screen your phone is not bricked, but I seem to be all out of options and nothing has helped.
The boot screen displays the following:
RUUNBH (Top right corner)
KAIS1*0
SPL-1.56.0000
CPLD-8
Please, any and all help would be greatly appreciated!
I don't believe JumpSPL is intended for radio flashing. Flash HardSPL and reflash with a shipped AT&T ROM.
I can't flash HardSPL for some reason, when I press enter in the prompt it brings up nothing happens.
Good job there slick! Did you purposefully ignore all the posts about safely flashing your device?
If you don't mind a little berating & a ton of sarcasm, I may be compelled to take an interest in helping you to fix the device (or to see how badly you've f'd it up & if it can be salvaged at least). Anyway, find me on MSN IM if you want & I'll walk you thru the steps for diagnostics & if possible, recovery.
You'll have to promise not to rush into doing any more stupid things though.
MSN/Live IM: ([email protected])
Yeah, yeah, gung ho, help the newbie, man this is getting old.
for I friend
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II
Managed to get it straightened out, for some reason MTTY 1.42 wasn't working properly with my system but 1.16 did the trick- Rebooted through there and flashed HardSPL then loaded my ROM without a hitch. Thank you everyone for being so responsive and helpful!
srdjank said:
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II
Click to expand...
Click to collapse
Ahhh, one more staisfied customer! Glad I could help out srdjank. Just remember that you can't treat a Kaiser like it's a Wizard. Similar yes, but there are different processes for safely flashing.
So far I've seen that Flashing Radios with JumpSPL is a sure recipe for bad memory blocks. Always, ALWAYS, HardSPL!
i also had the same problem when i tried to sim unlock my mda vario iii in progress screen the progress stuck at 95%. i would appreciate any help to recover the phone. thanks in advance

Jocky HardSPL etc

OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
Read the SQL Questions thread in the Wiki. It will explain a lot of this to you.
In short, any HardSPL will allow you to flash, it's just the 3.* ones are more compatable with the latest WM6.1 builds.
EDIT:
Normally I'd flame you for this, but Im already flaming another noob atm That doesn't mean someone else wont flame you later.
Ta
Dave
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
If you are able to flash a ROM onto your device, then you must have an UNLOCKED phone. For simple instructions on upgrading to the new SPL I suggest you visit the following :
http://forum.xda-developers.com/showthread.php?t=398565&highlight=step
Good luck.
Well I am sure I am gonna get flamed for this post, but here goes....
BTW "I AM NOT MOANING OR PICKING FOR AN ARGUMENT" I know this info here is given as is and appreciate the time people spend putting it all together
For the noob there is a trillion things to read here all of which lead to another trillion things which lead to ......
This phone flashing is all new to me and as I paid £434 for it I dont want to brick it, a term along with many I have never heard of before coming here.
I digress...
Anyway after reading and trying to understand it all I have flashed my phone and it works a treat and I am happy, just still in the dark about many things.
The thing is as a noob it is extremely daunting to start to read a thread, wiki etc to try to understand about a topic which diverts you to threads which divert, divert, divert so that after 3-4 diversions you foget what it was you were readiing about to start with!
And then you get to the point....I dont understand this...should I post lest I get flamed.......
So basically from a noobs point of view....everyone was a noob at some point, be gentle with us!
OK.....let the pachjo bash commence...........
Not a flame, just my way of working...
You raise some good points about the amount of info here. But like most here I managed to flash my device without posting a single new thread. If I had a problem with a step I posted there.
_Alex_ has consolodated most info into the single sticky. And there are step by step guides and FAQs on the Wiki.
I just took it one topic at a time:
*Found a ROM, said I needed HardSPL.
*Found HardSPL, installed it.
*Flashed ROM.
*No sound, found thread explaining about Radios. Flashed Radio.
*and so on.
I was (and still do) always reading thread that I found related to me learning as I go and helping where I can. I too like you knew nothing when I first joined and no one minds "noobs" asking questions in the relevant threads when they get stuck, but this is ROM development forum. All new threads should pertain to ROM "development".
Ta
Dave
you must use (aka JumpSPL )file before changing the SPL
this jumber must be in your device before flashing the new hard SPL
see hare and read carefuly :
http://forum.xda-developers.com/showthread.php?t=396922
got it from here also
http://forum.xda-developers.com/showthread.php?t=354061
cheers
Thanks guys.....am reading away and will take onboard your comments
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
thomassster said:
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
Click to expand...
Click to collapse
Yep... I shall do that!
I have gone flash crazy as I am now gonna whack on L26_KaiserDiamond_V9
I am amazed at how fast my apps are loading now I am no longer on the stock ROM!
The phone reception is better, the SRS WOW is fandabbydosey its all good for me, and I have fixed (well found the solution to at least one of my gliches also)

Categories

Resources