Related
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.
What you could do is read, all the post people have put to do exactly what your asking. All the info is there you just need to search and read or use the wiki.
Have fun
-McMex
Thank you.
Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.
Thanks for keeping it simple for the newb. I read a couple of things about the "radio" portion being an issue. What does the "radio" tweak mean and will a HARD RESET fix problems if I decide to revert back?
decimusmaximus7 said:
Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.
Click to expand...
Click to collapse
The radio that comes with this rom will be the one you need. A hard reset only reinstalls the rom you currently have on the phone so to revert back you will have to choose another rom and install it. As long as the rom you install is an AT&T one or one made for the tilt then you won't have to do anything with the radio. If you change and use an HTC ship rom or one of dutty's other roms then you will have to download another radio and install it. Radios self install the same way as roms do.
This is the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
On this page is the link to the ftp area where you could download the older radio if you decided to go to a non tilt rom.
Did you have any keyboard problems when doing the HARDSPL and installing the dutty rom. Also, which of the dutty roms did you install? Beta 2?
I am still on the Beta 1 and have been too lazy to changeover yet as Beta 1 is solid.
If you really want a good "How To" check out Mr. Van X:
http://www.mrvanx.org/cms/index.php...ask=view&id=65&Itemid=26&limit=1&limitstart=0
Every place he says "Hermes" you just think "Kaiser" or "Tilt". All the steps are the same. It is a great walk-through. He has you download the .net framework first. I know I didn't have it. Then he steps you through hardSPL and finally the ROM.
A few weeks ago I followed this exactly and have never had any troubles. Why a walk-through like this is not in the Wiki for the Kaiser/Tilt I have no idea. It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".
Augster said:
It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".
Click to expand...
Click to collapse
Why don't you write an entry for the wiki? That's how the Wiki is updated and maintained, by contributions by everyone.
afavre said:
Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.
Click to expand...
Click to collapse
I just used HardSPL and Dutty's Hybrid Rom No 5. I'm not sure what the difference is from his Tilt Beta version but I tried both and decided to go with the Hybrid. Point is, until last night I did not know what a Rom was. I read the forum and followed the directions. Here are links to what I used.
HardSPL (you need to do this first). Everything you need to know is in the first post
http://forum.xda-developers.com/showthread.php?t=334679
Then find a ROM. I downloaded several including the stock ATT rom just in case I decided to go back. The steps for loading a ROM are almost the same as HardSPL, just follow the directions on the screen.
This is a link to Dutty's Tilt Beta ROM (all you need is the link to the ROM at the bottom of the first post). If you want to try Dutty's Hybrid ROM, scroll to the 3rd post made by username "alltheway" and click on the red Hybrid No 5 Rom link in his signature block.
http://forum.xda-developers.com/showthread.php?t=345385
It is very simple to do.
Do I need to SIM Unlock?
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?
ShinySideUpAZ said:
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?
Click to expand...
Click to collapse
No you do not
I've very new to all this, having used a non-PDA/smartphone (SE637) for many years before purchasing a Tilt. While quite PC-literate, I find myself very intimidated with all this. I read as much as my mind allows before requiring large quantities of diet-coke -- then I need a nap to calm myself down from the soda before reading any more, or my head explodes.
I think that I need a new ROM, but I'm not sure why! Everywhere I read, that's what I'm told.
This community is very knowledgable and seems very helpful. As this appears to be more for developers than users like me, I'm hesitant to ask my question for fear of offending a developer, which isn't my intent. I'm looking for information that might assist me in choosing which ROM to use.
I suppose that I want the phone to run faster, be easier to use/see (I don't see as well as I did 50 years ago... ), and have the latest of whatever is the best at the moment, spending as little as possible in the process. A truly never-ending story...
Before you start flashing decide what's important to you. Are you looking for a certian look & feel? Is fuctionality more important or do you want spped/stability?
Then research the different Roms, most include feature lists & screen shots in the first few posts of the thread.
So what it really comes down to is a lot of reading.
Oh and be sure to HardSPL your device BEFORE doing anything.
Also, like kyphur said read and do the hardSPL first but for me I found it's most helpful just to try some. Download a few, flash them give it a whirl and see what you like. Once you try a few you'll find options and programs you love and will start looking for roms that have what you need and more importantly what you don't like. And if you never find anything you love then start cooking. There are a lot of great wikis here to guide you step by step.
Hope this helps.
Start with Wiki first. Once you hardspl, load your first rom. You will find how easy it is and start to flash more roms like crazy. Experiment, and then you will find what you like. After flashing your first rom, you will realize how much better your new rom is compare to the stock rom.
just start off by choosing a few roms...then read about it as the chef would describe their rom...see which one fits u most...then make sure u read teh wiki and faq before u actually start ur flashing...to make sure nothing goes wrong...and then if that doesnt fit u..try another rom..but all the roms here...are better than stock for sure
I knew this wasn't going to be easy... Rating system anyone? I suppose I'm also nervous about doing a first flash. What about CID and SIM unlocking?
MarkAtHome said:
I knew this wasn't going to be easy... Rating system anyone? I suppose I'm also nervous about doing a first flash. What about CID and SIM unlocking?
Click to expand...
Click to collapse
HardSPL removes the Carrier lock (CID) from your phone. As for SIM unlocking, I haven't bothered yet because I don't travel anywhere that AT&T doesn't provide service.
Once you've done your share of reading, if you are still confused about what type of ROM you are looking for, check out whatever the latest Dutty release is at that point in time. Dutty's Kaiser ROMs are probably the most popular on XDA.
I use a [somewhat] clean ROM myself, with the bare minimum preloaded. This way I can install what I need, and not worry about wasted space for programs I don't use.
eenie meenie minie moe
j/p
however, for Christ sake, please have hardspl installed.
Just pick one by reading the changelogs usually located in the first couple of posts.
P1Tater said:
eenie meenie minie moe
Click to expand...
Click to collapse
Yours sounds best!
NotATreoFan said:
HardSPL removes the Carrier lock (CID) from your phone. As for SIM unlocking, I haven't bothered yet because I don't travel anywhere that AT&T doesn't provide service.
Once you've done your share of reading, if you are still confused about what type of ROM you are looking for, check out whatever the latest Dutty release is at that point in time. Dutty's Kaiser ROMs are probably the most popular on XDA.
I use a [somewhat] clean ROM myself, with the bare minimum preloaded. This way I can install what I need, and not worry about wasted space for programs I don't use.
Click to expand...
Click to collapse
Is there a Tilt-specific version (currently with ATT's latest released ROM) of HardSPL that avoids all the headaches I'm reading about?
I'm still not sure how this works, but if I were to go Dutty's, should I look for UC - from what I'm gathering, I could then get a minimum ROM version, choose what I want added, then somehow update that bare ROM to include my choices, keeping all my settings in the process? A hard reset, if needed, would restore the new UC basic ROM along with what I added -- do I have this right?
MarkAtHome said:
Is there a Tilt-specific version (currently with ATT's latest released ROM) of HardSPL that avoids all the headaches I'm reading about?
I'm still not sure how this works, but if I were to go Dutty's, should I look for UC - from what I'm gathering, I could then get a minimum ROM version, choose what I want added, then somehow update that bare ROM to include my choices, keeping all my settings in the process? A hard reset, if needed, would restore the new UC basic ROM along with what I added -- do I have this right?
Click to expand...
Click to collapse
The version of HardSPL required is determined by what version SPL that is on your phone. If you reboot your phone in bootloader mode, you will see a version number for SPL. As long as you follow the directions for that version, you will be fine.
NotATreoFan said:
The version of HardSPL required is determined by what version SPL that is on your phone. If you reboot your phone in bootloader mode, you will see a version number for SPL. As long as you follow the directions for that version, you will be fine.
Click to expand...
Click to collapse
Thanks, NotATreoFan. I found info on what a bootloader is, and this is the info displayed:
KAIS1*0
SPL-1.93.0000
CPLD-8
What should my search criteria look like to find the HardSPL that I need to use?
http://forum.xda-developers.com/showthread.php?t=354061
and i think from your spl version you can pretty much guess which one you have to use
XtreMe_G said:
http://forum.xda-developers.com/showthread.php?t=354061
and i think from your spl version you can pretty much guess which one you have to use
Click to expand...
Click to collapse
Thanks for the help, XtreMe_G. Just so I have this straight, out of the 4 files listed, I only need to download and run JumpSPL1.93-KAIS.zip and I'm done? The Tilt is now prepared to accept any appropriate ROM?
MarkAtHome said:
Thanks for the help, XtreMe_G. Just so I have this straight, out of the 4 files listed, I only need to download and run JumpSPL1.93-KAIS.zip and I'm done? The Tilt is now prepared to accept any appropriate ROM?
Click to expand...
Click to collapse
You need JumpSPL to get started, and then you need HardSPL to flash. 2 zip files total. Memorize the steps prior to starting, and do NOT skip any of them for any reason...
man...I thought I gave you advice yesterday on what to do. Literally, thousands of people have hardspl their roms just fine. Even a couple blonde girls in this forum have done it. It is not that hard and you shouldn't have too much trouble. Just follow the instructions and you will be just fine. After your first flash, you will move couple levels up in knowledge.
NotATreoFan said:
You need JumpSPL to get started, and then you need HardSPL to flash. 2 zip files total. Memorize the steps prior to starting, and do NOT skip any of them for any reason...
Click to expand...
Click to collapse
Will do ask you suggest. Just a thought... by doing this, will anything on my phone be affected (programs, settings, etc.)? I'm, obviously nervous about all this, and while I will follow your instructions with hardSPL, I'm not yet ready to flash a ROM.
thomassster said:
man...I thought I gave you advice yesterday on what to do. Literally, thousands of people have hardspl their roms just fine. Even a couple blonde girls in this forum have done it. It is not that hard and you shouldn't have too much trouble. Just follow the instructions and you will be just fine. After your first flash, you will move couple levels up in knowledge.
Click to expand...
Click to collapse
Your information was very valuable. I just needed a little more detail to help calm my nerves...
Hi I'm not new to PDA but i'm new to flashing and roms and stuff.
I have a HTC tytn 2 whit an english (UK) rom on it (no brand the real one from HTC itself). I want to have an dutch rom after some browsing and a bit of reading i stumble upon some things that would be great if it worked. But i'm actully a little to scared to try stuff (600 € is not a toy to play with and you need to be sure doing stuff right). So what i know so far is that i need a NL rom i have chosen this one NoThrills_WM61_NLD_V3 i dont like the branded things so NO thrills. So then i read that i need to HardSPL the thing. So i run it, guess what white screen, no problem as i've read further i need to use the jumpspl instead so i run it and the i get the Tri-color. Now what i don't know is what i need to do next. Cause in the other tutorial they use this program to run the "PDA Phone ROM Update Utility" whit the exe file. I'm stuck here. What do i need to do now to get the rom onto the device or do i need to do it another way?
Thanks in advance.
Redostrike said:
Hi I'm not new to PDA but i'm new to flashing and roms and stuff.
I have a HTC tytn 2 whit an english (UK) rom on it (no brand the real one from HTC itself). I want to have an dutch rom after some browsing and a bit of reading i stumble upon some things that would be great if it worked. But i'm actully a little to scared to try stuff (600 € is not a toy to play with and you need to be sure doing stuff right). So what i know so far is that i need a NL rom i have chosen this one NoThrills_WM61_NLD_V3 i dont like the branded things so NO thrills. So then i read that i need to HardSPL the thing. So i run it, guess what white screen, no problem as i've read further i need to use the jumpspl instead so i run it and the i get the Tri-color. Now what i don't know is what i need to do next. Cause in the other tutorial they use this program to run the "PDA Phone ROM Update Utility" whit the exe file. I'm stuck here. What do i need to do now to get the rom onto the device or do i need to do it another way?
Thanks in advance.
Click to expand...
Click to collapse
No expert here - the WIKI is your friend.
The jumpspl is there only to get you past the white screen. You STILL need to HARDSPL your phone or you will brick it.
The white screen problem only adds another step to what you need to do.
You really need to go and read and re-read until you are sure of what you are doing or you will need GSLEON3.
So - an overview of what you need to do:
1. get past the white screen - (using jumpspl) and then put HARDSPL on your phone - DO NOT PROCEED until you can see either OLIPOF or JOCKY on your boot screen.
2. once you have hardspl installed you are going to want to flash your phone - frequently a radio comes with the flash - other times it does not and you will have to pick a radio to flash.
Trust me this is worth it in the long run - but it will raise your blood pressure - no go get your asbestos suit on and read!
Bill
waiting for a mod to close this thread as it is redundant.
if u read the jumpspl thread it clearly tells u what to do next.
Redundant thread.
Please read the WIKI and _Alex_ Sticky. It has all the information that you need.
Looks like the post in this thread alone should answer your question.
Hi everyone, I have recently bought a htc touch pro from polish orange provider. I have browsed dozens of topic, trying to make my windows mobile 6.1 life more satisfying, but I have few questions to ask.
1. What does Hard-Spl do ? And can I hard-spl my phone ?
2. To install advanced config, do I have to jailbreak my windows, or do anything to install it ? I don't want to end up with useless phone
3. When I try to upgrade my default opera browser to the newest build, the instlaler cannot uninstall previous version of opera, neither can I because it is not listed in add/remove programs menu. And, if I ignore the warning, I get an error in installling the newest build, but somehow I have 2 opera mobiles listed in programs menu.
Thanks in advance, r4ster.
r4ster said:
Hi everyone, I have recently bought a htc touch pro from polish orange provider. I have browsed dozens of topic, trying to make my windows mobile 6.1 life more satisfying, but I have few questions to ask.
1. What does Hard-Spl do ? And can I hard-spl my phone ?
2. To install advanced config, do I have to jailbreak my windows, or do anything to install it ? I don't want to end up with useless phone
3. When I try to upgrade my default opera browser to the newest build, the instlaler cannot uninstall previous version of opera, neither can I because it is not listed in add/remove programs menu. And, if I ignore the warning, I get an error in installling the newest build, but somehow I have 2 opera mobiles listed in programs menu.
Thanks in advance, r4ster.
Click to expand...
Click to collapse
I probably can't answer your questions like a pro, but I had a few experience that I can share with you.
1. I don't know what Hard-SPL do, but I guess it's like jailbreak for Windows Mobile device. If you want to flash to a new custom Rom, you need to Hard-SPL it first (don't need to do this if you flash back to the original ROM). And yes, Hard-SPL your device
2. Jailbreak is only a term to unlock your iphone... With a Win Device, you don't need to unlock anything to be able to download and install other software. This is the beautiful part of a Window mobile.
3. Definitively can't help you here... but I know that plenty of thread has been posted for this matter... just do a quick search. However, I strongly suggest (with no responsibility) you to "Hard-SPL" and "CID unlock" your device and flash it to a new ROM. It will make your phone faster and much cleaner. Also, you'll get your new Opera install.
The question now is, which ROM
I suggest NATF's v2.3, but he'll be releasing a v3 today or so. Don't flash to it right away... just flash to v2.3 first and see if v3 is stable or not by reading people posts.
Flashing is not as hard as people claim... just read and be very carefully before you do it. Don't skip any step. The first time is stressful, but after that it's just a daily burger.
pandaboyy said:
I probably can't answer your questions like a pro, but I had a few experience that I can share with you.
1. I don't know what Hard-SPL do, but I guess it's like jailbreak for Windows Mobile device. If you want to flash to a new custom Rom, you need to Hard-SPL it first (don't need to do this if you flash back to the original ROM). And yes, Hard-SPL your device
2. Jailbreak is only a term to unlock your iphone... With a Win Device, you don't need to unlock anything to be able to download and install other software. This is the beautiful part of a Window mobile.
3. Definitively can't help you here... but I know that plenty of thread has been posted for this matter... just do a quick search. However, I strongly suggest (with no responsibility) you to "Hard-SPL" and "CID unlock" your device and flash it to a new ROM. It will make your phone faster and much cleaner. Also, you'll get your new Opera install.
The question now is, which ROM
I suggest NATF's v2.3, but he'll be releasing a v3 today or so. Don't flash to it right away... just flash to v2.3 first and see if v3 is stable or not by reading people posts.
Flashing is not as hard as people claim... just read and be very carefully before you do it. Don't skip any step. The first time is stressful, but after that it's just a daily burger.
Click to expand...
Click to collapse
So, I can flash any rom I want, and still have a fully working phone, after hard spl ?
r4ster said:
So, I can flash any rom I want, and still have a fully working phone, after hard spl ?
Click to expand...
Click to collapse
you have to hard-spl first before Flashing any Rom. Please read those sticky carefully. I do not take any responsibility of what you're doing.
This is what I did (it works for me without any problem)
0- I backup everything I need with PPCPimbackup and outlook
1- I HARD-SPL my device
2- I CID unlock my device
3- Flash to NATF's v2.3 ROM, hard-reset my device
4- Flash new Radio (this step is optional... and to find the best one, you have to test one by one.)
5- Restore my backup
6- Re-install extra software that I need.
Like I mention earlier, these steps work for me, and there are big chance that it will work for you as well... but I do not take any responsibility. Before you Flash to any ROM, HARD-SPL your device. and after flashing your ROM, HARD-RESET it.
pandaboyy said:
you have to hard-spl first before Flashing any Rom. Please read those sticky carefully. I do not take any responsibility of what you're doing.
This is what I did (it works for me without any problem)
0- I backup everything I need with PPCPimbackup and outlook
1- I HARD-SPL my device
2- I CID unlock my device
3- Flash to NATF's v2.3 ROM, hard-reset my device
4- Flash new Radio (this step is optional... and to find the best one, you have to test one by one.)
5- Restore my backup
6- Re-install extra software that I need.
Like I mention earlier, these steps work for me, and there are big chance that it will work for you as well... but I do not take any responsibility. Before you Flash to any ROM, HARD-SPL your device. and after flashing your ROM, HARD-RESET it.
Click to expand...
Click to collapse
Ok, what if the hard spl goes wrong, is there a way to unbrick the phone ?
And thanks for all the help !
r4ster said:
Ok, what if the hard spl goes wrong, is there a way to unbrick the phone ?
And thanks for all the help !
Click to expand...
Click to collapse
Well, first I hope that it doesn't go wrong. And second, I'm pretty sure you can stand the temptation of flashing to a new ROM, so you'll probably going to do it very soon. But Third, So far I haven't seen any thread that someone can unbrick their Touch Pro after a bad flash (he/she didn't Hard-spl before flashing, that's why)... However, there is a way to do it with the Kaiser... so don't lose hope there.
Just READ everything carefully, you have a 99.5% successful rate if you do. I would say that the 0.5% is just your bad luck (example Computer stop working during the flash... but that's just pure bad luck and you can't blame anyone but God)