Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Re: USB Activesync cable, not detecting phone but charging..
kaleidoscopelex said:
Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Click to expand...
Click to collapse
What OS are you using?
If WM5 - there are several Threads about XDAII with WM5 having problems to sync via USB (I have this (unsolved) problem, too).
(Have a lokk at www.buzzdev.net, too)
So: no solution, but at leat an assurance that there is no hardware problem.
regards
Shrek3K
kaleidoscopelex said:
Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Click to expand...
Click to collapse
I turn of firewall of pc windows xp.
I experience the same problem too.
Try re-installing the ActiveSync. This worked for me.
I installed the WM 6.1 about one month ago and everything was fine until recently. Has anyone been able to find a solution for this? mine started doing this about three days ago. I was syncing fine just last week!!
(edited, I´ll move it to a proper place)
Have you tried disabling the advanced network functionality option?
I'm having the same problems too.
It all worked fine. 1 day it stopped working. I've removed the partnerships and uninstalled ActiveSync, installed again, reboot both devices. Started working.
Now it stopped working again!
I've got a HTC TyTN
Help...!
I've the exact same problem with me Raphael with RomEOS WM6.1. It won't work on Vista or XP, tried all the standard stuff and tried it on a fresh computer with Vista. Seems to be a WM6.1 or ROM issue.
I'm looking for instalation files for ActiveSync on WM6.1, but can't find any.
Where we can find ActiveSync ROM cab file so that we can install on Mobile again.
Since ActiveSync on mobile is not working as I have to 2 phones
1) HTC Tytn II (Not Working)
2) O2 Atom ( Working )
with same usb cable and same desktop or laptop.
can anyone help where we can get a activeSync Installer for phone.
I have the same problem, I am running WM5 on an Eten Om600+ and Vista no my laptop.
the phone charges, but there is not communication between computer and phone. all was fine, till one day... no sync no more.
Any suggestions?
bushido1 said:
Have you tried disabling the advanced network functionality option?
Click to expand...
Click to collapse
where do i find that?
ok Im having the same problem here with my Titan.. how did you all get it to work again?
i got a SPV M1000. one cradle and one USB cable. I prefer using USB cable to cradle. I got same problem as you with my USB cable. USB cable can charge but can not synch. I dismantled my USB cable and found out that. one data tag(pin) was loose. and people should know that. USB cable have 22 tags(pins): 2,5,16,17,18 are connect to (-) negative and 13,20,21,22 (+) positive. the tag number 14 and 15 is the date line. If one of 14 or 15 tag is loosen(mean it donot touch to your ppc when you plug the cable in) then your ppc only can charge and cannot synch. So, I pushed the tag 14th on my cable back, seal with some superglue. after that, my usb cable work again until now.
by the way, i disconnected the pin number 20,21,22 from (+) positive. disconnect one data pin ( 14 or 15). after that, my USB cable can be used to charge my PPC through PC or the any chargers with voltage >5V. is that usefull huh?. and when i want to Synch, i reconect that pins again. for more convenient, i do it with a Switch with 2 poles.
Hello Super Users,
I have a HTC touch Dual, the problem I am running into is that when I connect my phone to the computer using a USB cable the computer does not recognize the PPC .
I have check the USB cord and tried to sync it with another computer but the problem still persists .
I have not yet done a Hard Reset because I have quite a few data which I would loose .
Could someone please help me out .
Regards.
Your USB cable might be damaged. (It happened to me.) Buy a new one (they are fairly cheap anyway) and try it. If it was just happening on one computer I would also suggest redownloading the latest activesync and reinistalling it on your pc.
well, since this is not OS or model specific i'll place the question here.
1 colleague plugged in his HTC Desire at home and his pc crashes, and his internal mirror RAID became invalid. after the reboot (boot disk was a separate disk) he tried to connect his phone again and no problem at all!
another colleague plugged in his HTC Desire (bought a few months after the one described above) and the pc freezes (no immediate reboot) and the cooling fan from the power supply started blowing like there's 30 volts running through instead of 12. YES REALLY! i was there! after a reboot, again, no problem at all!
me, connecting my HTC HD2 to my pc and suddenly it starts rebooting. after the reboot, again, no problem at all!
immediately afterwards i tried plugging in the usb cable pressing gently in all possible directions in the usb plug. tried different usb plugs. tried with or without my phone connected on the other end. there was no way of repeating anything i wrote in this post.
so the question. does anyone recognize this?
what other phones and phone OSes give this problem?
could it be win XP? win7? vista?
anything?
Hey everybody!
I searched all over the Internet for an answer, even sent an email to htc, but my problem wasn't solved.
I have this connection problem with my HTC TYTN 2. When I connect it to my PC, my PPC starts charging, but on my desktop I get no notification at all that a device has been connected. I installed Active Sync, HTC Sync, and still didn't find anything. What could this possibly be? I managed to connect my PPC through wireless and using WIFI Remote (a PPC app). But I need an USB connection so that I can fully use it. Please help me, I've tried everything (I think)
Hello friends at XDA.
Having some issues with Vista and my Sensation.
Every time i connect my Sensation to HTC sync my pc gets unresponsiv. Everything connected with usb stops working (mouse keyboard Wifi and so on)
Any one got some ideas what to do?
If this is posted in wrong forum, please let me know.
Peace
Vetsje.