Hello Super Users,
I have a HTC touch Dual, the problem I am running into is that when I connect my phone to the computer using a USB cable the computer does not recognize the PPC .
I have check the USB cord and tried to sync it with another computer but the problem still persists .
I have not yet done a Hard Reset because I have quite a few data which I would loose .
Could someone please help me out .
Regards.
Your USB cable might be damaged. (It happened to me.) Buy a new one (they are fairly cheap anyway) and try it. If it was just happening on one computer I would also suggest redownloading the latest activesync and reinistalling it on your pc.
Related
Hello every one
Am experiencing a problem with my computer,when ever i connect usb mass storage to my computer,it comes up with an error message as
"one of the usb devices attached to this computer is malfunctioned and windows doesn't recognise it".
please do help me if there is any solution...
as of now no trouble shooting steps have been tried.
the problem is exactly what it says, your whatever mass storage device is not functioning anymore.
If it is a external harddisk, if u are pretty sure u never dropped it, then mayb there's a problem with the cable.
If it is a ppc, then u might want to change the sync cable, reinstall the htc usb sync driver or hard reset your phone
You may want to see if your devices are working in other computers to determine if it is the computer or not that is giving you the error. If it is your computer, you may want to try to update or roll back the drivers. Also, if you have System Recovery active in your PC, you could try to go back to the point where you think your problem started.
Hope this helps...
i have a usb-miniusb cable form my mobile HD that works like it should on the HD, but my S710 doesn't show up in windowsxp. What could be wrong? It used to work normally. Haven't used actuve syn for a couple of months. Now i saw some new roms that i want to try..
i tried another cable from my mediaplayer, same thing, mediaplayer works, my phone not
anyone a suggestion?
u can try to flash from bootloader mode
http://wiki.modaco.com/index.php/HTC_Vox
http://forum.xda-developers.com/showthread.php?t=319663
or else, from SD card..
wiki here http://forum.xda-developers.com/showthread.php?t=303558
hope it helps
is this just a wrong setting in the register maybe, or could my usb port be broken?
what rom can i use fore this?
possible problems
1: Port is clogged with dirt.
This sometimes happens if u usee the phone continually in a dusty environment. Clean the phone and use again
2: Is Activesync Installed?
Check if activesync is installed in XP. It contains the drivers for your phone.
3: try plugging the USB to another port of your computer. This happened to me in my previous computer. One of the ports was damaged, but the phone was detected successfully in another port
The first week I had my fuze i connected it to my cmputer multiple times. I connnected through active sync and through the memory card in my phone now when in plug it in on the same computer all it does is charge it doesnt show anything is connected or even attempting to connect. I reinstalled activesync,turned off firewall both didnt work. I prefer not to hard reset but if thats what it takes.... Any Ideas?
Partnership
I think I have had this problem before, you may want to try deleting the Activesync partnership from both the phone and the computer, then set it up again.
Good luck
if i delete activsync from the phone how do i reinstall it?
Noooooo
I didn't mean delete the actual Activesync application, just the partnership with the computer.
select manually from settings-connections-usb activesync and then connect wire, then disconnect and set it to storage and connect wire again. The point is to change the purpose of the usb manually between physical connections
i cant use my sd card
hy i`m new in android community... i`ve instaled xdandroid on my htc touch pro raphael 100 . almost everything is fine unless my connection with pc. i pair my phone with pc i`ve instaled the adb driver and sdk manager... my pc still don recognize the sd card... if i switch my phone on wm pc and sd card work fine... hope someone cand find a sollution 'cuz i done all i know this proble beat me. thx a lot !
when i connect my treo 750 to the usb cable the charging light comes on and thats it, nothing else happens, i have a 2gb card inside and it does not appear i cant pass music or files inside the card. nothing. can some body help me thanks
Have you installed ActiveSync or Mobile Device Center? Have you checked the device drivers on your PC to make sure they loaded properly?
startngate said:
Have you installed ActiveSync or Mobile Device Center? Have you checked the device drivers on your PC to make sure they loaded properly?
Click to expand...
Click to collapse
yes i installed mobile device center
and since i connected the treo and nothing happend there is no driver to download from the palm because its like nothing is connected how can i download the driver or why the computer doen even reads that something is connected via usb i connected the treo via bluetooth to my sis computer
i connected the treo to my sis vista laptop and same thing
Don't know if anything here will help ...
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
thanks
i tryed to sync via bluetooth but nothing
the guide says that i need to sync via cable
what is weird to me is that when i connect the usb to my pc it does nothing am gonna buy a new usb to see whats going on
and if after that everything its the same then the problem is with the device.
Same problem here
I got the same problem with my treo i bought it on ebay from hong kong , i'm trying to contact the seller . Any sugestions on this , i already try everything but nothign happens!!
Hi there...
A quick question about the USB...
Is is at all possible to have a USB-port that can still charge the phone, but at the same time is "dead" when you try to connect the phone to the computer ??
I have also asked about it here:
http://forum.xda-developers.com/showthread.php?t=1179171
The story is that the Phone (SonyEricsson X10i) can be charged fine, but when i connect it to the computer, my computer say that the hardware is not recognized, nomatter if it is in flash-mode, mounted from recovery or in the normal way.
And the phone don´t even show anything about USB connection in the status bar eigther.
I have tried 5 different computers now, and 2 different usb cables.
I have also a X10 mini and a Desire HD that works fine on all the computers and both cables.
I have tried to remove software, remove drivers, clean computers, reboot, check the memory-card in the phone, install software and drivers and all other things i can think off...
It is two windows 7 and three windows XP computers btw.
So is it at all possible that the phone can still be charged, but data-connection fail ?
As i see it, there must be some kind of data-exchange or else the computers would not even say "hardware not recognized"...?!?
I'm not quite sure I understood your question correctly, but let's see if this helps:
I used to have phone that didn't have drivers for Windows I used at the time (I think it was Windows 7). That meant that Windows wouldn't recognize it (when plugged via USB cable) and will not therefore provide power to that USB port (hence the phone will not charge).
I was able to get around the problem by going to the device manager, locating the relevant "unknown device" and force installing some random drivers for it -- I don't even remember what it was that I picked -- something that Windows would allow me to do. Of course the port wouldn't work as a data connection like this, but since Windows now 'knew' the device, it powered the USB port and I was able to charge my phone from it.
My problem is that I actually can charge the phone ok...
But I am not able to make a data connection between the computer and the phone at all...
My question is then, if the usb connector in my phone can somehow be broken even though I am still able to charge the phone...?
Sent from my Desire HD using XDA Premium App
I'm fairly sure that yes, the contacts or the controller can be broken so that you can still charge but be unable to establish data connection.