Can somebody help me to solve this problem ? Unlock Code Couter blocked
borce_razor said:
Can somebody help me to solve this problem ? Unlock Code Couter blocked
Click to expand...
Click to collapse
Hard reset and try again.
This question should be posted in the main Elf forum, not in this one. Also please don't cross-post
Thanks for answer
i have one elf with this problem, coubnter blocked say please wait for timeout and i wait 2 days but noting happand.
when i try to flash with radio rom or pda - phone stuck on 77% :S
i have alredy instaled spl upl :S
help?
Related
Hi all,
I had original German ROM and tryied to flash it. Stuck.
It stuck in tri-color mode with:
RUNNGH
KAIS130
SPL-1.93.0000
CPLD- 8
MYTT returns:
Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSHTC__102 Ã;¿HTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1300HC_0HTCE
Cmd>
PLEASE HELP !!!
did you try the command:
boot
It should boot up your phone and allow you to use it. When you reboot though you'll be back to the tri-colour screen.
Apparently, the correct fix here is to flash a rom from your original vendor. This didn't work for me but it has worked for others.
Thank you for reply
"boot" did not help. Returned ivalid command.
Who can, please help me with link to correct ROM?
Did you try to search...SEARCH !!! before asking a questíon that has probably been asked many many times before...
This is a developers forum...so use the threads already made for questions like that.
Its ok to be a NEWIE - but dont waste space
Welcome BTW
Yes I did for last 8 hours :-(
I tried to upload German reconstructed ROM- UPDATE ERROR
WWE - Invalid vendor
No any other solutions curently found....
Please help me....
German rom
Appearantly I need official German ROM.
Can somebody suggest where I can find one?
As I see it should be OFFICIAL and not reconstructed....
Please advise.
Any Help?
All,
Any possible help with it? Please...
What should I do with device? it's dead colored....
Thank you.
mrootman said:
All,
Any possible help with it? Please...
What should I do with device? it's dead colored....
Thank you.
Click to expand...
Click to collapse
I just fixed one with the same problem. It just worked running the boot command in mtty. try it again, its not a regular behaviour...
Read here more info: http://forum.xda-developers.com/showthread.php?t=362300
Hi..
I'm owner of Qtek 9100. Everything clear abotu this phone..unlocking, upgrading...no problems at all.
Now, i have Qtek900o (Universal) from my friend.
I want to make upgrade on WM6.
Just asking if i'm right...
1st step : CID unlock
2nd step: new bootloader
3rd step: one of known WM6 roms
Is this coorect?
I found link on ftp for CID unlock and bootloader for universal, but link don't work ...this is link..
ftp://xda:[email protected]/Uploads/Upload/HTC_Uni_Unlock_v1.7z
If my steps of upgrading are correct, can anyone please give me link for CID unlock and bootloader tool.
TY very much!
bye, akulp
Please help ! Universal
Hi
I seem to be having the same issue but no one seems to reply to my thread either... I tried to go through the CID unlock on the wiki but I keep getting an error device not connected whenever I try to put 'Button' ROM on ... also I click on the link to CID unlock on the WIKI and get a load of instructions for the Wizard, im not sure if this is correct... could someone out there please give us some help ? all id like to do is get WM6 on so I can get MSN working on my phone..... Thanks in advance ... James UK
jstubbings said:
Hi
I seem to be having the same issue but no one seems to reply to my thread either... I tried to go through the CID unlock on the wiki but I keep getting an error device not connected whenever I try to put 'Button' ROM on ... also I click on the link to CID unlock on the WIKI and get a load of instructions for the Wizard, im not sure if this is correct... could someone out there please give us some help ? all id like to do is get WM6 on so I can get MSN working on my phone..... Thanks in advance ... James UK
Click to expand...
Click to collapse
Same trouble here,help ?
Please can someone out there give us a bit of there time and help ... I dont think we are being noobs, we have done what is said on the board.... PLEASE! Thankyou
Please Help
Please can someone out there give us a bit of there time and help ... I dont think we are being noobs, we have done what is said on the board.... PLEASE! Thankyou
I have never Cid unlocked. I just use the patched maupgrade_noid.exe to flash as it bypases the CID check.
Also my G4 had the latest bootloader (2.01) in when I got it.
Be careful when changing the bootloader as if you get it wrong you have a very expensive paperwieght.
Psi
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
To upgrade the phone to wm6,its required to be SIM/CID unlocked,read the unlocking and upgrading threads in the 'Wizard Upgrading' forum posted as 'Stickies'.After CID unlocking,you'll be able to upgrade to wm6.
thanks a lot
trippo said:
thanks a lot
Click to expand...
Click to collapse
Your most welcome
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
delower10 said:
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
Click to expand...
Click to collapse
Did you SIM/CID unlocked your device?
janneman22 said:
Did you SIM/CID unlocked your device?
Click to expand...
Click to collapse
i know sim unlocked but i don't know about cid bcoz when i appear this phone was stuck on bootloader
please tell me how can i recover this ?
it isn't very difficult to install. Look around for instructions (Soft/HardSPL thread).
How do you flash with the bootloader showing?
My Wizard 200 only comes up in Bootloader screen.
ActiveSync does not connect with it.
When I run the rom upgrade it tells me it can not find it.
So how do I get it to boot normally again?
This happened while flashing a rom....
Thank You in advance.
there is no problem, just connect your wizard in bootloader mode and run RUU to make the hard spl or soft spl
Hi All mates. my wizard is not displaying the GSm Radio. and due to this its not get connected with active sync. cause i want to reinstall my radio. and in bootloader mode no rom and upgrade utility is working. so what can i do.? is there any perfect solution so i can upgrade my rom to original shipped rom. i have ll versions of shipped roms.
also my wizard is not displaying the battery. its saying "Unknown battery" and not displaying any power percentage. and also no sound.
PLz Reply me..
Regards
my problem is solved. plz dont reply to this post.
thanks.
ruk_design said:
my problem is solved. plz dont reply to this post.
thanks.
Click to expand...
Click to collapse
Are You Serious!?
I'm curious, what was it? The solution? Sounds strange...
mates the problem is solved by wizard love rom. i put the pda in bootloader and start installing the wizard love directly. i also have imei-check unlocker. and i unlocked many pda's using my key. the trick is simple.
they register a key on you imei no. install wizard service tool and just change the imei of wizard to the one on the key. and then unlock with imei-check unlocker. it will work great and then change back the imei to its original using wizard service tool.
Regards.
Is there a way that i can unlock a htc vox (s710) that does not have a rom and only starts on 3 color screen or bootloader?
I tried almost everything but i failed. for example:
When I try to flash the USPL it fails with error (270) saying that image is corrupted.
I have come to a conclusion that in order to flash a rom (not a swisscom one) on it I need to unlock its CID first but since I dont have a swisscom rom on it a cant unlock it.
I think that only hope for me is to find an official SWISSCOM rom for which i failed too and flash it with that so then I can unlock his CID.
Anyone help please?
here you go
http://www.swisscom-mobile.ch/scm/dlc-de.aspx?dm=Overview&dg=SoftwareAndManual&pa=0x3x119x0x0x0x0x0x0&odg=SoftwareAndManual
http://www.swisscom-mobile.ch/scm/dlc/RUU_Vox_VF_CH_GER_1.23.166.1_4.1.13.44_02.94.90_ship.exe
2.nd linkis direct link to swisscom xpa1415 should be vox
get it update it and unlock
mmm i dont now how to thank you.
by the way Thank alottttttttt
BIG-BERTA said:
mmm i dont now how to thank you.
by the way Thank alottttttttt
Click to expand...
Click to collapse
just help other members as you could
if it doenst work try wildcard gold
its here in vox treath.
it lets you install ay rom if problem like yours exist but it is very difficult!