Hi All mates. my wizard is not displaying the GSm Radio. and due to this its not get connected with active sync. cause i want to reinstall my radio. and in bootloader mode no rom and upgrade utility is working. so what can i do.? is there any perfect solution so i can upgrade my rom to original shipped rom. i have ll versions of shipped roms.
also my wizard is not displaying the battery. its saying "Unknown battery" and not displaying any power percentage. and also no sound.
PLz Reply me..
Regards
my problem is solved. plz dont reply to this post.
thanks.
ruk_design said:
my problem is solved. plz dont reply to this post.
thanks.
Click to expand...
Click to collapse
Are You Serious!?
I'm curious, what was it? The solution? Sounds strange...
mates the problem is solved by wizard love rom. i put the pda in bootloader and start installing the wizard love directly. i also have imei-check unlocker. and i unlocked many pda's using my key. the trick is simple.
they register a key on you imei no. install wizard service tool and just change the imei of wizard to the one on the key. and then unlock with imei-check unlocker. it will work great and then change back the imei to its original using wizard service tool.
Regards.
Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hi Everyone!
I am trying to install the XM6r2 version of rom provided by mfrazzz in the post http://forum.xda-developers.com/showthread.php?t=315178
and I am following all the steps as you specified in your first mail, and when I say I am following the steps, I mean, I am doing the base Rom installation from my provider, then Splash screen stuff for G4 users, then Radio rom stuff as you specified in your first post and then I am coming to the step of Installing your XM6r2 rom, but everytime at the end of the installation = after 99%, I am getting the error Error (302): Update Error and then it ask for the recovery.
Can anyone please help me with this problem, I really want to try this rom you provided, also I am quite new to this stuff but since last three days I read some stuff about the roms etc. so I know atleast that my device is XDA mini S is a G4 device because my IPL/SPL is 2.xx.xxx.1.
moreover:some more info about my XDA
ROM Ver: 2.21.4.1 WWE
Radio Ver: 02.07.10
Protocol Version: 413.1.03
ExtROM Version:2.21.4.101
If I am doing something wrong please point me out or help me with this problem.
Many Many thanks in advance, and any help from any user of this group will be highly appreciated.
Thanks!
Are you running the ruu to run the update on your G4? Try Shelltools instead. Sorry, I know very little about G4's so can't help you much more than that, but there are lots of people with G4's running XM6r2.
You may have more luck posting in the G4 Wizard forum if people don't respond to you here (this is really a G4 issue and not a WM6 issue).
thanks man!
I have posted the same thread at G4 forum and got the reply to Install Wizard_Love as a base rom rather than my provider's rom.
Any ways thanks again!
Cheers!
Hi,
yes ur advise worked I just used the shell tool and its working,can i ask u a quick Qs, may be its a known bug, I am unable to access my contacts list? is it a bug in XM6r2 or do you think its a different sort of error??
please advise.
thanks
kbilal said:
Hi,
yes ur advise worked I just used the shell tool and its working,can i ask u a quick Qs, may be its a known bug, I am unable to access my contacts list? is it a bug in XM6r2 or do you think its a different sort of error??
please advise.
thanks
Click to expand...
Click to collapse
Were your contacts stored on your SIM card? If not then your contacts went bye-bye when you installed the new rom.
Shane
yes definitely man, they were stored in the Sim thats why I am asking why I can't access them? any ideas?
kbilal said:
yes definitely man, they were stored in the Sim thats why I am asking why I can't access them? any ideas?
Click to expand...
Click to collapse
By default the rom hides sim contacts...go into start, programs, and use the sim managerto copy the sim contacts to the phone or do a search for the registry hack which hides sim contacts and disable it.
Hi Everyone!
I am trying to install the XM6r2 version of rom provided by mfrazzz too. but i have a G3 (cingular 8125)
ROM 2.25.11.1.WWE
Radio : 02.25.11
Protocal : 4.1.13.12
i have tried 2 different Rom's from here
1. XDA Mobile 6 r2a
2. Tri-Syn-WM6
in either cases i get the same error 302 and it reaches 99% and gives me the same.... I have an unlocked pone and it is also CID unlocked.
any tips.... or if u can link me to a direct ROM which can help, i'll be highly appreciated.
here i have found 100's of rom's but nothing which actually can update a 8125 cingular to WM6.
i also read a lot abt briking. so im scared to glory before error something or getting myself an expensive paperweight. HELP
archieworld said:
in either cases i get the same error 302 and it reaches 99% and gives me the same.... I have an unlocked pone and it is also CID unlocked.
any tips.... or if u can link me to a direct ROM which can help, i'll be highly appreciated.
here i have found 100's of rom's but nothing which actually can update a 8125 cingular to WM6.
Click to expand...
Click to collapse
I have a Cingular 8125 (as well as many others here) and the roms here will all work IF YOU FOLLOW THE DIRECTIONS EXACTLY...
Are you sure you are CID Unlocked? This is different than SIM unlocking. I would highly recommend you read the stickied post on how to flash a device and make sure you have done all the steps to CID Unlock your phone and that you didn't skip anything. If you haven't gotten both of your IPL and SPL down to 1.xx then you have NOT CID Unlocked (if you have a G3).
Good luck, but if you follow all of the directions provided to you, this stuff will work.
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
To upgrade the phone to wm6,its required to be SIM/CID unlocked,read the unlocking and upgrading threads in the 'Wizard Upgrading' forum posted as 'Stickies'.After CID unlocking,you'll be able to upgrade to wm6.
thanks a lot
trippo said:
thanks a lot
Click to expand...
Click to collapse
Your most welcome
trippo said:
i tried to update my rom with one with windows mobile 6 but the intall session was stopped at 99% and now when restart my wizard compare the 3 color screen and i don't know how i can do to resolve this problem do you can help my please? thanks a lot.
Click to expand...
Click to collapse
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
delower10 said:
I have same problem please any one help me about that
Phone Details :
IPL :1.01
SPL: 1.06
Wiza200
thanks
Click to expand...
Click to collapse
Did you SIM/CID unlocked your device?
janneman22 said:
Did you SIM/CID unlocked your device?
Click to expand...
Click to collapse
i know sim unlocked but i don't know about cid bcoz when i appear this phone was stuck on bootloader
please tell me how can i recover this ?
it isn't very difficult to install. Look around for instructions (Soft/HardSPL thread).
How do you flash with the bootloader showing?
My Wizard 200 only comes up in Bootloader screen.
ActiveSync does not connect with it.
When I run the rom upgrade it tells me it can not find it.
So how do I get it to boot normally again?
This happened while flashing a rom....
Thank You in advance.
there is no problem, just connect your wizard in bootloader mode and run RUU to make the hard spl or soft spl
Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
hewelpakar said:
Hello to all:
Only after try searching in forum and google i decided to wirte in this fantastic forum. Sorry for my poor english....
I have a ebay-purchased Artemis (P3300) and, using Opera mobile it freeze and I swithched off. It never change Windows Mobile more....
It only reachs the bootloader mode and if I try to charge another ROM but I can't because it give an ID error. The device is not CID unlocked....
I try to unlock it:
- Kaiser unlocker: not posible, requires ActiveSync
- SuperCID: the same above
- Blackstone Cid unlocker: Is my solution....but doesn't work!!
Changing the Vista-driver and in Xp I get the same promp:
Device no response (or similar)
I can use RUU with mtty without problem.
The posibles solutions the I can understand throught this forum are:
- Technical Service: No posible, the ebay-vendor removed the IMEI - without IMEI they don't repare without a legal IMEI (and in garantee...)
- Hard Reset: doesn't work, the device format his internal device, start windows installation and it freeze completely.
- CID unlock: Only posible in bootloader mode and in doesn't work with blackStone
- Original ROM: If i could find the original ROM, the device will complete the actualization and (with lots of luck...) restart the device OK
There is another solution?? a tecnical service without IMEI requirement??
Thank you very much, I'm waiting hopefully answer....
thanks!!
Click to expand...
Click to collapse
Hi,
Without IMEI your device is useless. Send it back to the vendor.
Dirk
I know....
I know but without IMEI is not useful, but I purchased it three months ago and now i can't ask anything to the vendor....
Then, do you think that it is a hardware problem or a software prolem??
Thank a lot!
hewelpakar said:
I know but without IMEI is not useful, but I purchased it three months ago and now i can't ask anything to the vendor....
Then, do you think that it is a hardware problem or a software prolem??
Thank a lot!
Click to expand...
Click to collapse
It's both... the SW needs the IMEI (hardcoded in the HW) to check if the device is accessible. IMEI is like an ID-card for humans... without ID you don't exist, just like a phone without IMEI doesn't exist.
Will look nice as paperweight though
Dirk
No IMEI stick
The device has an IMEI and was functionally for two months without any problems... but the IMEI stick is not attached into the battery hole.
Then, in real the device has an IMEI and can work as a telephone, but I have no way to know it....
His use as paperweight is the last choice...i hope!!, In this case....it will be an very beautiful one....
Then, If i could restore the ROM on the device, maybe it would work properly...
Any idea to restore it??
thank a lot!!
hewelpakar said:
The device has an IMEI and was functionally for two months without any problems... but the IMEI stick is not attached into the battery hole.
Then, in real the device has an IMEI and can work as a telephone, but I have no way to know it....
His use as paperweight is the last choice...i hope!!, In this case....it will be an very beautiful one....
Then, If i could restore the ROM on the device, maybe it would work properly...
Any idea to restore it??
thank a lot!!
Click to expand...
Click to collapse
Did you look around in the Artemis fora ?
Dirk