Database Info

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001

http://blog.neten.de/read.php?66
???????????????????????????????

A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!

yes please if this is a way to cid unlock a G4, can someone please translate?

not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.

Kensu, thanks for your time!

If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!

abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?

inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.

abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!

Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino

Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )

Thanks
Great !
It works... Thank you so much
Merlino

Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks

Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?

You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24

No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!

I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)

Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???

I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

Orange SPV C600 Application Unlock

Hi Peeps,
I have been researching many websites without any luck. I am new to Windows Mobile devices and looking for some assistance in Application Unlocking the C600/Tornado.
I have seen some posts about flashing it with the Imate ROM. The phone itself is sim unlocked however I am trying to install some third party applications and it is stating I don't have enough permissions.
I have tried various Registry editors but they won't install.
Can anyone help?
Edit:
I have tried using the HTC Unlocker. It states unable to open regedit.exe. I have also tried SDA_Applicationunlock.exe I get the message "Phone is not unlockable".
This is driving me crazy, can anyone help.
Cheers
Werdns

16 views and no replies, if anyone can provide any information that would be great.
Werdns

In archive three files.
The names begin with 1,2,3
In this order start all three

Many Thanks Alexx,
I believe I have the AKU2 update, will this still work?

Thanks so much. It worked a treat!!!!

100% working solution needed

unlocking spv c600
Hey guys
I have followed the above steps to unlock my phone, and I'm still gettting an "Invalid Sim card" error.
I have tried just about every unlocking app or method there is, and still no luck. I have a new SPV C600 which I got on an Orange contract about a year ago. And it's security locked so I can't edit the registry, and I can't install any certificates either.
And though I tried the 1, 2, 3 step method above, and tho it told me it was successfull on all 3 steps, my O2 sim card still doesn't work.
Waahhaaaa....
help please

i have bought TMobile SDA. Can we unlock with this ? If not can anyone tell me how can i unlock it myself..help needed urgently..thanks in advance

Alexx~ said:
In archive three files.
The names begin with 1,2,3
In this order start all three
Click to expand...
Click to collapse
THANKS; THIS WORK FOR ME 100%

Where can i find the archive?
hi guys (and girls)
i tried to find the archive to put the 1,2,3 but i realy can not find it.
is now running on the latest rom from orange, i realy like to un lock it.
sorry i am a newbie
pls help me
tnx
|Ger

spv c600 unlock
Hi Guys,
I've been trying to unlock my SPV C600 following the instructions mentioned above. However, in order to complete these 3 steps, seems that I need an additional application to open the file extension .cpf found on steps 1 and 3.
I was wondering if anyone could help me with addtional download or instructions to solve to my issue pleaaaaase.
Also, should I put a different simcard, orange simcard or leave without simcard while I run the application on the phone?
Sorry about these stupid questions.
Many thanks for your help.
Thanks for the file Alexx~
Fontanella

Please have a look at this link
http://karhoe.net/content/view/21/1
or
http://robertpeloschek.blogspot.com/2006/03/howto-application-unlock-your-windows.html
It is useful unlock your phone.

hmmm i have also tried almost every way of application unlocking on the internet
i have a SPV C600 and i cant open regedit.exe
these 3 applications havent worked for me unfortunately
any other ideas caus im all out and im on the brink of giving up
if someone could please pm me with a few suggestions i might have missed one
its getting late and i dont want to break my phone by firmware or fist...

Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico

I've just application unlocked my Qtek 8310 using 3 steps.
Thanks.

chaqueun said:
Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico
Click to expand...
Click to collapse
thank my freind,my SPV is now unlocked by this method

@Alexx~;
me i have got errors->unknown error-2147014795 in read operation with SPV-Developers services what is the hell is this?

working!
Thank you even old post!It help me to much!!!!!!!!!!!!!!!

plzzzzzz help me with my spv c600
GUYz MY PROBLEM IS HUGE. I AM STUCKED ON A THREE COLOUR SCREEN ON MY SPV C600 CEEL WHILE I WAS TRYING TO UPGRADE IT. THE ONLY ROM THAT SEEMS TO WORK , ONLY STOP AT 2% (WM5) DURING THE PROCESS. WAT SHLD I DO. I HAVE BEEN ON THIS FOR ABOUT 2WEEKS. PLZZZZZZ HEP [email protected] IS MA EMAIL

Seems like the same story over and over again... sigh.
You first must get access to the old OS again. As you have not succeeded in doing any upgrade yet, the old OS should still be there. Do a hard-reset:
1.) switch off
2.) press l+r softkey + keep pressed until a next step tells to release them
3.) switch on device
4.) wait for white screen with advice on hard-reset, release L+R softkeys
5.) press key for hard-reset (should be 0)
Device reboots to old OS.
When old OS is up you MUST(!) application unlock the device before you can do anything else. The Orange devices are especially resistant to allow this crucial first step. I have no such device, but key to success is that SDA Application unlock tells that your device is successfully unlocked.
Look for C600 Unlock to find dedicated instructions.
Mind that after the application Unlock you need also the CID Unlock and (if SIM locked) also the SIM Unlock. All is possible for free, so no need to spend money for that.

I Got Problem. Plz Help.

Hi All mates. my wizard is not displaying the GSm Radio. and due to this its not get connected with active sync. cause i want to reinstall my radio. and in bootloader mode no rom and upgrade utility is working. so what can i do.? is there any perfect solution so i can upgrade my rom to original shipped rom. i have ll versions of shipped roms.
also my wizard is not displaying the battery. its saying "Unknown battery" and not displaying any power percentage. and also no sound.
PLz Reply me..
Regards

my problem is solved. plz dont reply to this post.
thanks.

ruk_design said:
my problem is solved. plz dont reply to this post.
thanks.
Click to expand...
Click to collapse
Are You Serious!?

I'm curious, what was it? The solution? Sounds strange...

mates the problem is solved by wizard love rom. i put the pda in bootloader and start installing the wizard love directly. i also have imei-check unlocker. and i unlocked many pda's using my key. the trick is simple.
they register a key on you imei no. install wizard service tool and just change the imei of wizard to the one on the key. and then unlock with imei-check unlocker. it will work great and then change back the imei to its original using wizard service tool.
Regards.

First Rom Upgrade

hi guyz
am going to upgrade my XDA-Exec (Universal) G4 for the first time. its currently running WM5 from O2 but i am going to use it with another Service Provider.
now want to make sure of couple of things.
first... is there any HardSPL type of programe for Universal so that atleast i dont endup bricking the phone ?
second what exactly does the CID/EROM locks are for or SIM lock. I can use my other companies SIM in this phone so do i still need to do it ?
third how safe is the ROM updating without anything like HardSPL....?
reason why iam asking this is because its my friends phone and dont wanna brick it and second i have upgraded my HERM but have not done a Universal WM5 to 6 or 6.1 upgrade

Welcome.
No Their Is No HardSPL For Universal.
IMHO CID Unlocking Should Be Done As Various Bootloader Commands For Recovering The Device Will Only Work On A CID Unlocked Device. (I Think!)
Rom Upgrading Is Relatively Safe. Jus Make Sure The Battery Is Fully Charged.
Read The WIKI For More Information.
I Hope All Goes Smoothly For You.
P.S I Highly Reccomend Tomal's 8.0 Rom!
Regards,
OllieD

aaaa what is IMHO CID ? and how do i unlock it ?

Tis In The Wiki...
This Link Should Help You Out...
http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
This Tool Is For Sim Unlocking The Device But Also Makes The Device SUPERCID (SUPERCID Unlocks All Bootloader Commands)
Regards,
OllieD

STUCKK .... Yikeeesss
guyz ..
i got the ROM updated last night and was using when i finally thought of using another ROM... while upgrading the other rom it just gave and error message on the PC and the phone was on the page where it ask you to press 0 for default ... so i did that and the phone restarted but now its stuck on the Splash Screen (the O2 operator starting screen) ...
if i connect the phone to the PC it will not recognize the phone as its totally stuck on the Splash screen ... if i try to goto the bootloader screen it gives me the same message of either Pressing X or 0 ... also the USB is not recognizing it ..
what to do .????

Do I NEED origional oem rom to flash to Windows Mobile 6?

Hello,
I am new to XDA and im getting ready to attempt, for the first time, flashing one of my phones to WM6. First of all Ive read the forum rules.ive gone through the tutorials and i have a decent understanding of how to unlock the CID and how to flash the phone. But after hours of searching i havent found a concrete answer to a question or 2.
I have a P4300 (110) running WM5. Its a G4 model as on startup it say 2.28.0001. This was purchased from a small cell phone company named UNICEL which is no longer in business and the phone has a UNICEL splash screen.
Since this company is not in business im unable to get the origional oem rom. Unless someone knows something i dont. Ive searched XDA, googled it, went to htc.com and got nothing.
Which brings me to my question. Is it imperitive that i have the origional oem rom? Or if i just unlock the CID will i then be able to flash to a wm6 rom? The SIM is already unlocked.
Also one last question. Im not sure how to correctly get into bootloader mode. I read some tutorials and it gave the same options as doing a hard reset. Is that considered the same thing?
Anyways sorry for the novel. Ive just been unable to find an answer for this searching xda and google. Thanks!
Oh and I fogot to mention im actually going to upgrade to WM6.1. Not that it makes a difference. But figured id mention it...

*** UPDATE ***
Ok.. I got the phone in bootloader mode finally. But now I'm having trouble syncing my phone in bootloader mode. I have windows VISTA and i know activesync has been replaced with Windows Mobile Device Center. I followed this tutorial --- > http://forum.xda-developers.com/showthread.php?t=338473 to a T. And it still doesnt work. I can see the windows mobile device in Device manager. But windows mobile device center won't connect to it, and i tried running Hard SPL and it cannot find the device either. Is there a new way to go about this in Vista? I noticed this tutorial was a bit aged.
Thanks!

Connect your phone to the usb cable... go to my computer -> right click -> Manage... Then go to Device Manager and click on anything from that list and than click that little icon -> scan for hardware changes... than it detects your phone... this is how it works for me... i have to do it every time i connect my phone... and hope it works for you to...
and... if you decided to flash to a new ROM... go to http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies and follow the guide.
don`t put the phone in bootloader mode when you try to sync with the pc... it won`t detect it... when you will start the RUU then it will go it self in bootloader...