I'd like to disable the phone from waking up when i get a text message... If i get one while the phone is in my pocket, the act of pulling it out keeps on resizing my text for some reason...
I have diamond tweak and the "wake on sms" is disabled, but it still does it... I've tried enabling it and disabling it again to no avail...
Anyone have any suggestions?
I have advanced config, diamond tweak, and total commander if any can get the job done.
Run phoneAlarm - which controls phone profiles and many other aspects of how your phone operates. It has an option to keep the phone from waking up on SMS.
The re-sizing may come from your touching around the D-Pad as you pull the phone from your pocket. That's what I was doing an it had me totally baffled for about a week - until I accidentally discovered that you could change the font size by running your finger around the action button.
Hrmm... phoneAlarm looks like it's a huge hastle to put in and i rather like the touch flo... wouldn't want to disable it to put in something else for this one feature I'm looking for...
I'm just miffed though... The registry key:
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
is already set to 1... it should be disabled... but it still wakes up...
can anyone tell me why?... I DO have the sprint (cdma) version if that makes any difference but i don't think they would have jacked with sms wakeup...
bump... anyone know how to help with this?...
it's driving me nuts trying to figure out why it's not working as intended...
i also tried different things to not wakeup the phone on sms but nothing worked.
does anyone have a solution???
I have turned it on and off several times to see if I could replicate your issue and I cannot. There is an issue with your phone disregarding that Diamond tweak setting. There are a few things I would look at, are you running the stock ROM or did you flash one? What applications have you loaded on the phone one might be conflicting or overriding that setting. If I just could not figure out what could be causing this issue I would hard reset and before I load anything I would test to see if it works or not.
-McMex
Related
Hi guyz,
Googled it with no real solution, nobody in the Touch Pro forum seem to have it either.
Is there any way to disable waking my ppc or at least lock the touch panel on notifications like low battery, appointments etc. Message notification is easy to disable, Answerkeys Disabler works like charm when it comes to incoming calls but I want to disable waking up the device on any notification and have only audible alerts.
Often when in pocket or case my TP wakes on low battery or appointment reminder and starts random dialing, texting, etc. which is getting annoing.
Thanks in advance,
dEM
there may be a registry key you can delete so that you don't get notifications at all.... i'm not real sure about which ones though. i'll look around.
EDIT: SHNotificationRemove at msndn :
http://msdn.microsoft.com/en-us/library/aa455968.aspx
Good question,hope someone has an answer
how about usin s2u2? doesnt solve it exactly but maybe a workaround?
There are some locking solutions over there. I'm looking for one that doesn't lock my device all the time but only on these notifications. The best will be if it doesn't even wakes up.
Just great! More than a month I've been trying to find a solution to this problem with no success!
Hi,i hope this keeps the thread alive,i would also like to know if its possible and how
Me Too!
I have this exact same problem. When a reminder alerts me on the phone it wakes up the unit and turns the display on. If this stays in my holder it just keeps the phone on because it senses all the pushing... We have a PIN enable so it won't do anything major. But there are times I've pulled out my phone to find it awake (on) and there are * in the password field - so I know it is sensing touches when in the holder. This definitely drains the battery.
HELP PLEASE! Any Fix found?
I'm having this problem as well - anybody out there got any ideas...?
I hate how there seems to be no solution to this! It didn't happen to me in WM6.1, so it must be buried within 6.5 in some dark, fetid, unreachable place :-(
I keep accidentally dialing people with my bum when one of my reminders goes off. Grr!
EDIT: I did finally cave and install a slide to unlock feature (S2U2) which I got from http://a2-s2.com. I was surprised with the level of customization you can do with this program, and I do love how I can have the slider's wallpaper change randomly, so I am greeted with a different image each time I unlock the phone. I know it's not what any of us were looking for, but it's a workable solution for now.
I've since gotten round this by using PocketShield - works well for me. Doesn't work well with the PIN lock though....
I'm using Smartlock for locking the screen; incoming call and stand return from suspend.
It has an option "suspend after lock".
http://forum.xda-developers.com/showthread.php?t=505032
disable wake on notification
finally figured it out, a few years later.
still can't find a factory setting for it, but i downloaded NILS (notification lock screen) and it gives you the option to disable wake on notification. hope it helps
Ever since i installed wm6.5 (and I tried a few) I am have trouble accepting incoming calls. This is different from the lock screen issue. Whenever I get an incoming call i see it and either hit the hard key or slide left on-screen to accept but it doesn't answer but continues to ring. if I slide then the slider gets stuck all the way to the left until it stops ringing.
Any ideas as to what could cause this, I have this on different wm6.5 roms, and my friend who has the same wm6.5 rom has no problems.
Please help
well turns out it does answer but takes like a few secs to engage so if i click to answer late in the ring it doesnt have time to answr b4 the person goes to voicemail. i did use trapcall b4, and have now cacelled, maybe it is causing my problems?
any info of how I can reset att to default settings like voicemail and get 100% rid of trapcall.
I got this from a different thread and saved it to my computer just in case I bumped into this problem. I don't know if it'll work on 6.5, but you might want to give it a try:
I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.
It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...
Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.
When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.
Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.
Dude, thank you so much, I cant believe it was so simple. But I'm confused how it happened in the first place. Anyways yeah, changing SuspendResume to #777 works wonders.
I've got a slightly different Slide To Answer issue.
I just updated to the newest HTC stock rom for my Touch Pro.
I noticed on the first call that Slide to Answer was part of this rom.
It seemed to work well but suddenly I lost the slide button. The green bar for answer and red for reject are still there but the slider itself has disappeared. The only other thing I have changed since the rom upgrade is to add a cab file (from an XDA thread) that restored my Chinese fonts. Could something in that have disabled the button graphic?
What else could it be? How do I get this button back?
Also, is there a way to customize the Slide to Answer screen?
Rom: 5.07.707.2 WWE
Radio: 1.11.25.01
The Slide-to-Answer, for whatever reason, never worked right on my Fuze, so I just disable it.
I am trying to prevent my TP2 from automatically going on standby mode after calls end. Anyone know which registry entry I need to edit?
Maybe you can have a look at this thread: http://forum.xda-developers.com/showthread.php?p=4430725
Hope that can help....any further helps are needed.
Thanks for the reply. That is to reassign the wake-up key. I do not want it to automatically go on standby after every call. I am severely physically disabled and cannot press the hardware keys.
might be a dumb question to ask, but since I don't know of any setting/software that would make you're phone go into standby immediately following a call, are you sure that...
1) it sleeps IMMEDIATELY after the call....and
2) Tah you're device isn't simply suspending according to you power/backlight options set in Settings / System / Power / Advanced "turn off backlight" & "turn off device" settings?
I know that the backlight will fast sleep DURING a call which can also be changed but it sounds like your issue is different than this.
Post further details for addional help.
mentalee said:
might be a dumb question to ask, but since I don't know of any setting/software that would make you're phone go into standby immediately following a call, are you sure that...
1) it sleeps IMMEDIATELY after the call....and
2) Tah you're device isn't simply suspending according to you power/backlight options set in Settings / System / Power / Advanced "turn off backlight" & "turn off device" settings?
I know that the backlight will fast sleep DURING a call which can also be changed but it sounds like your issue is different than this.
Post further details for addional help.
Click to expand...
Click to collapse
Do you have a TP2? I was told by HTC tech support that this "feature" is to save battery life and cannot be changed in the settings. I am positive it goes on standby immediately after every call. I have been through every setting on the phone and cannot find the cause. I am going to re-flash the stock ROM to see if there's a difference.
If you have a TP2...
1) What ROM are you running?
2) After a call, do not touch your phone. Do not even hit the End key. See if your phone goes on standby.
ok...yes I think the setting ur referring to is the FAST SLEEP on phone calls. Meaning the backlight goes off nearly immediately after RECEIVING a call but while ur still on the phone....right?
I am not sure the registry entry right now but there is a tweak app that should fix that for you. Not sure what that app is on a TP2 but on Kaiser/Tytan 2 it's a kaiser tweak and on my Fuze/Diamond it's the Diamond Tweak app. Maybe someone can comment as to whether the Diamond Tweak app is compatible with the TP2 or maybe google "kaiser tweak for touch pro 2". BTW it is a tweak/hack and not a system setting that you can disable that I know of. So flashing ROMs is pointless u'll still have to tweak unless it's already tweaked n the rom.
Give me a day/so I'll find that and post back
I'll look for the registry hack if someone doesnt beat me to the post.
Hope that helps......
hey try these registry hacks on ur phone to see if that prevents what ur trying to stop. To edit the registry u can install and use total commander
*** Prevent Fast Sleep During Phone Call ***
HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD
ormantDisplayDuringCall to 0
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
******
Hope that Helps!
My device does not go to sleep during calls. ONLY after calls end. I have tried 2 apps, and neither worked.
NoSleep
Power Tweaker 2
Thanks for the suggestions, let's keep trying! I'm sure we can figure this out!
mentalee said:
hey try these registry hacks on ur phone to see if that prevents what ur trying to stop. To edit the registry u can install and use total commander
*** Prevent Fast Sleep During Phone Call ***
HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD
ormantDisplayDuringCall to 0
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
******
Hope that Helps!
Click to expand...
Click to collapse
Just tried these. Still no luck. Any other suggestions?
Any current "device lock" or power related programs currently installed that might have a setting controlling the status/suspend of the phone after a call is hung up? I think Slide to Unlock used to have a setting that did this, so maybe it's another app that is unknowingly causing this behavior.
I will google a bit and see what else I might be able to come up with. Thanks for the clarification on whether it is during/after a call. Sleeping immediately AFTER a call is not a normal behavior with my phone or my previous winmo phone either... so it is a bit puzzling to me.
mentalee said:
Any current "device lock" or power related programs currently installed that might have a setting controlling the status/suspend of the phone after a call is hung up? I think Slide to Unlock used to have a setting that did this, so maybe it's another app that is unknowingly causing this behavior.
I will google a bit and see what else I might be able to come up with. Thanks for the clarification on whether it is during/after a call. Sleeping immediately AFTER a call is not a normal behavior with my phone or my previous winmo phone either... so it is a bit puzzling to me.
Click to expand...
Click to collapse
The only app I have installed currently is Touchtris. I am using EnergyROM StandardM2.5 from Sept 12.
Your continued help is greatly appreciated.
I have somewhat found out what was causing my issue. I was using EnergyROM StandardM2.5 build Sept 12. I re-flashed my TP2 to the stock ROM, and my issue is resolved.
So the problem is either in the EnergyROM or Windows Mobile 6.5. I am going to flash another WM 6.5 ROM to see if the issue returns.
HTC tech support claims that the auto standby is an intended power saving feature, but it is not happening on the shipped ROM.
My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.
I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.
yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.
Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!
I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.
Ok, this is probably going to be a complete noob type solution, but it's got me stumped.
My screen locks during calls. Can still see all the buttons (End, Keypad, Speaker etc) but they are all disabled. Not a huge problem on a normal call as I can use the hard button to end the call but makes it impossible to use voicemail etc which need the keypad.
I'm using S2U2 along with NRG CHT ROM but nothing else I can think of which may be affecting the screen.
Been right through the settings in S2U2 but the best I could manage was switching the "Lock On Talk" to "BT Only" which made it work for one call and I was able to use my voicemail but then tried again and it's all locked up again.
Anyone else had this or know what might be causing it.
Hi there, not to sure what could be causing that... I had the same problem months ago, a Hard Reset sorted out the problem. Think it was something i installed, not sure what