My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.
I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.
yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.
Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!
I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.
Related
Figured I'd post this where some developers might actually see it. Please let me know if anything already exists to do what I'm looking for.
I Just got a new 8525 (USA carrier: Cingular, slightly modified HTC TyTN) and love it so far. BUT there are a couple things I'd love to change...
The FIRST is disabling the flashing notification LEDs, there's two around the front earpiece, the one on the right flashes green for cellular network connectivity and is on solid when charging (orange then green when charged). On the left is one that flashes blue for BT but green for WiFi.
There's already an effort at MoDaCo BUT it also disables vibrate. Need to keep vibrate and ideally would like to keep the ability for the phone to use the LEDs for notifications (voice mail, call missed, etc). Even in my shirt pocket the flashing is always catching my eye.
Next, I'd really like a way to send all audio to a simple BT earphone (i.e. not an AD2P stereo jobbie) for listening to podcasts, audio books, etc unobtrusively. There's something out there called BTAudio, but it doesn't seem to work on this device. When I run it there's noise audible in the earphone, but audio through media player still comes out of the speaker, not the earphone.
Seems this would be useful for all HTCs (and any others?) with slide out keyboards: a way to disable the popup of the onscreen keyboard. An example: I'll open something that requires text entry, the keyboard pops up, I slide the phone open, the onscreen keyboard goes away, I enter stuff into the field then go on to the next one, and the d_mn onscreen keyboard will often popup again, which is very annoying because if covers much of the screen especially in landscape.
--Maybe a way to link disabling the popup to being in landscape?? Would just as soon keep the on-screen button for the keyboard though, with it's notifications for shift and blue dot...
Well, is there any hope?
TheCritic said:
Next, I'd really like a way to send all audio to a simple BT earphone (i.e. not an AD2P stereo jobbie) for listening to podcasts, audio books, etc unobtrusively. There's something out there called BTAudio, but it doesn't seem to work on this device.
Click to expand...
Click to collapse
Did you read my related article ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1398&more=1&c=1&tb=1&pb=1 )?
Bluetooth Audio is reported to work with the Hermes / TyTN. Please see http://forum.xda-developers.com/showthread.php?t=278778
BTW, do you want me to relocate the thread to the TyTN forum?
I figure it applies to more then just the TyTN, which is why I put it here. These forums are so segregated now...
I think I FOUND a solution for popup onscreen keyboard annoyance:
http://personales.ya.com/beemer/dow..._WM2003_WM5.zip
you don't need any new soft to disable popup keyboard. first of all, it disappears the moment you start typing with slideout one, and stays gone until you manually activate it. another thing, also found here without any effort tells you about a registry tweak to disable it permamently. search.
banannq said:
you don't need any new soft to disable popup keyboard. first of all, it disappears the moment you start typing with slideout one, and stays gone until you manually activate it. another thing, also found here without any effort tells you about a registry tweak to disable it permamently. search.
Click to expand...
Click to collapse
Yeah, the popup goes away, then pops back up as soon as you move to the next field, possibly covering it, then goes away when you type, then comes up again next field... Especially annoying with the gmail midlet (which has problems of its own relating to selecting fields in the first place).
Would appreciate a link for the registry tweak, haven't seen it in any of the Hermes/TyTN tweaking threads, and there doesn't seem to be a way to set nullKB to be the default.
http://forum.xda-developers.com/showthread.php?p=918794#post918794
try this out for the sip problems... personally don't know how it does, as im fine with ignoring the virtual keyboard;]
I'll have to try that, thanks Banannq.
So I came up with a few more things I'd like a way to do or would be eager to help somebody beta test
The first two relate to being able to unlock and show off the phone to friends and co-workers while keeping some things private...
1: Except maybe for replying to an SMS I really would like a way to make it so I have to enter a password to run the messages/email program, or even better to enter certain folders within it. Love the way Hotmail works on the PPC, but without some way to keep my private email private I just can't use it.
2: Ability to set a default filter in contacts, for example I'd use the 'no categories' filter, but others have many other uses for this. Not sure if I'd want it to apply to quick dialing or caller ID in the phone app, but an option for that too would be nice.
This is just a general one I've heard many ask for:
3: The ability to set the Calendar application's default opening view, for me it'd be 'month'.
Any of these things possible? Anybody else have some small changes/options they'd love to see added?
I saw this registry tweak:
http://www.mdatweak.com/tweak_detail.php?tweak=14
that adds vibration to buttons of the dial pad
However I tried it in WM6 and it doesn;t work anymore. Does anybody know how to get it working in WM6?
I used the attached cab and got it working in WM6.
It looks like it makes the same changes as on that website, only automatically.
One thing I noticed, which might help or might not, was that it didn't seem to vibrate when I had "Keypad" under Phone Settings set to "Off".
Try setting it to "Short tones" and see if it works.
Oh, and you've reset your phone after making the registry tweaks, right?
yep, that was it. my device (htc herald wm6) was set to no sounds.
I found that it does not always vibrate. Sort of as if the vibrate motor has to start up. It worked best if the settings were set to long tones.
But I'm not using it anymore. in practice it is not as handy as I though it would be
vibrating keypad
hi guys. i downloaded the above attached file to my tytn 11 (orange). i find it does not work well (due to the time lag in the vibrating winding-up process) - and wish to delete it (it is actually quite annoying) and regain the normal keypad tone. i have gone into 'settings' 'remove programmes' and see no item listed. I have gone into 'file explorer' and delete the file name - to no effect. have i done the wrong thing? can anyone help me, please?
First of all...
This is wizard forum not herald....
Then use this...
attached let me know if this works...
+ Que PPC. thanks. have tried your solution (and then done a soft reset). unfortunately it has not worked! could you please consider another solution...?
noup really no...
I dont have other this works forme on Hermes and in wizard the truckQteka makes the dids! but i dont find it anymore. sorry men ask on Kaiser forum
I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
EDIT: This should be enough. try flipping your screen/sliding your keyboard and see if the screen changes orientation.
Now put your device on standby, and turn it on again. If orientation stays the same - you're done. If not - try steps 5-7, although they seem to be irrelevant.
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps
So now, if you need something to help you rotate your screen on demand, you could use this small app that i've made.
its called ScreenRotate.exe (naturally), and you use it like this:
usage: ScreenRotate.exe <command line argument>
0 : Rotete to angle 0
90 : Rotete to angle 90
180 : Rotete to angle 180
270 : Rotete to angle 270
CW : Rotate clockwise
CCW : Rotate counter-clockwise
MIRROR : Mirror the current angle
If nothing will be specified at command line, nothing will happen.
.NET CF 2 is needed.
I really recommend using it along with FTouchFlo.
This way, to rotate the screen manually, you just need to drag your finger the way you want the screen to be shown, from top to bottom.
I find it quite comfortable while driving...
Those are the changes you'd need to change in FTouchFlo to make it work with ScreenRotate:
DownUpApp:\Program Files\FTouchFlo\ScreenRotate.exe
DownUpAppCmdLine:mirror
LeftRightApp:\Program Files\FTouchFlo\ScreenRotate.exe
LeftRightAppCmdLine:cw
RightLeftApp:\Program Files\FTouchFlo\ScreenRotate.exe
RightLeftAppCmdLine:ccw
Thank you so much... I have been looking for this for sooo long.
This is the perfec way to make it stick in either Portrait / Landscape.
There have been many users such as myself who have wanted our devices to stay in landscape and this is the perfect hack.
Thanks again... Cheers
BTW -> Tested and works on my Hermes
Just added it to the Hermes Wiki (Can be found under regisrty tweaks although it's not a reg tweak)
happy to hear that!
you're welcome mate.
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
zalaros said:
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
Click to expand...
Click to collapse
actually, you're right.
i guess the notification has nothing to do with it,
i don't remember what made me think it does.
i'll edit the hack accordingly.
thanx zalaros
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Ok i found a way to reload this specific device (mis1).
1. Run taskmanager.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll) (it is unloaded if you have done everything described on the 1st post)
3. Long-Tap on it, and choose "Set Manual"
4. Long-Tap on it again, and choose "Set Automatic"
5. Soft reset your device
zalaros said:
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Click to expand...
Click to collapse
I have the same syncing problem
Doesn't seem to work on my Tilt/Kaiser-Dutty 6.0..
Any other ideas?
redlynr said:
I have the same syncing problem
Click to expand...
Click to collapse
Just solved!
The ActiveSync troubleshooter (menu: Help/Troubleshooter for ActiveSync) offered to clear the "Enable advanced network functionality" check box. While trying to do that, an error message "Failed to disable RNDIS ..." was popping up every time. As per this suggestion, I removed virtual COM ports from Bluetooth settings and then it was possible to clear that check box.
Immediately thereafter ActiveSync woke up on the PC and offered to create a new partnership (because I deleted everything in frustration earlier). No problems for half a hour.
Then I left the administrator account and logged on as the usual limited user. ActiveSync again was unable to connect until the advanced functionality check box was restored. Does it seem that those both accounts will require different settings? Dunno, I haven't checked yet.
On my Wizard, with the TNT Rom (August 08), I don't see the device MIS1, and I don't see the event in the TaskManager.
Any ideas how to disable screen rotation, when I slide the keyboard?
Thanks in advance
Sprint HTC Touch Pro ROM 1.03.651.4
The MIS1 solution did not work for my phone (Sprint HTC Touch Pro ROM 1.03.651.4), but I found that this does:'
HKLM\System\GDI\Rotation\CamAppActive = 1
Presumably the device thinks the camera is active and thus doesn't rotate the display.
Obviously this will return to 0 after soft reset, so I used TaskMgr 2.9 to export the entry, then added a startup shortcut to import this entry with the /silent flag.
UPDATE: This fix interferes with data entry in Opera. When I try to type into a google search box, I get one character, the box looses focus, and I gotta tap on it again to type any more. Severely annoying. Goes back to normal when I change CamAppActive back to 0, and close and reopen the keyboard. I may make an exe to toggle or just make two reg import shortcuts.
Way cool!
Works for me too on a Kaiser, with old Dutty ROM.
How in the world did you figure it out? Look at that key?
Thanks, Jeff
It made perfect sense, but admittedly I tried changing everything under "Rotation" before I tried that one.
Item #21 on this list clued me into that area of the registry:
http://forum.xda-developers.com/showthread.php?t=398265
El Zilcho.
Bupkis. I've been knocking my brains out trying to disable autorotation, but still have manual enabled. (I've got some apps that play nice only in landscape, and some only like portrait. Also, I'd like to be able to slide my keyboard out really quick-like to enter some quick text, then slide it back w/o messing with screen orientation.) I tried the MIS1 disable, but no-go for me. Also tried messing with the Rotation entries, specifically the SlideKey key, but apparently that value is volatile and changes with each slide. Oh well! Unless there's a way to lock the SlideKey value so it can't be changed, that'd fix my issue. Hmm.
EDIT: Forgot to mention. I've got the Tilt (8900 I guess?) with vanilla OEM 6.1 ROM, modded only for no-bloat. (Did the old battery trick after reset/reinstall to prevent bloatware.)
EDIT: After I typed this up, figured I'd try using Settings>Screen (or somesuch) to just fix perspective. Still auto-rotates. KaiserTweak and Advanced Config can't get it to stick on one or the either, either. Editing registry turns up same results. Settings right now say it's fixed at 0 degrees but it still autorotates.
Late-breaking edit, 14-JUN-10: Got rid of it a few months ago anyways, moved to a Rhodium. No D-pad, so no more worries about those games that didn't like rotation, as they needed the D-pad to work anyways, and the TP2 doesn't have one.
Doesn't work on touch pro 2
http://forum.xda-developers.com/showthread.php?p=5928161#post5928161
That's what I resorted to!
Wow
Wow, pretty hard core fix! On the Sprint Touch Pro 2 Stock 6.1 my reg entry above only works to prevent rotation when the keyboard is slid out, it will not help with the autorotation provided by the sensor. I however put together some .reg files, with my perceived essential fixes including disabling sensor rotation:
http://forum.xda-developers.com/showthread.php?t=651166
So, following post 'step by step' didn't change anything with my screen rotation settings. still automatically rotates all the time when I don't want it too...really frustrating. This is about the 4th hack I've tried with no success. Does anyone know what the proper solution is for the HTC Rhodium? I'm running stock AT&T Tilt 2 Rom WM 6.5.
I know there are programs you can install to take over rotation control...I'm just looking for a reg change or service hack or something to stop auto rotate from ever happening.
Thanks to anyone who knows the answer!!
Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!
Kermy33 said:
Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!
Click to expand...
Click to collapse
What have you installed (to cause this problem)?
Do a search for "diamond tweak". There is an option to shorten the delay when an incoming calls rings. Perhaps that will help.
if you have S2U2 installed, you could try uninstalling or disabling that. You could also switch from the Diamond dialpad to the regular WinMo dial pad (the screen you see when go to the dialer). You can make this change using the Advanced Config Tool (i'm pretty sure, if not, then try Diamond Tweak).
There's also the initial delay value in the registry as mentioned in the last post.
These should all help, some more than others though.
there actually is an issue with Diamond tweak and advanced config...
if you use them to set your data disconnect time if re writes a registry value that makes your phone fritz when trying to answer calls.in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.
weird.....suspendresume on mine shows ~GPRS! as a value??
schollianmj said:
in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.
Click to expand...
Click to collapse
thanks for the suggestions and how do I fix the hang up lag?
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?
Kermy33 said:
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?
Click to expand...
Click to collapse
no idea, but i have the same thing
No luck with the tweak mentioned in post #5. However, after I replaced the HD CallerID with the default WM one (which is not that bad!) the phone responds rapidly :
1) Zero lag between first caller's ring and screen respond.
2) Almost zero lag between first caller's ring and bluetooth handset ring.
3) Less than 0.5 ring before the device starts ringing.
Only a minor problem : The bluetooth icon does not show any more on the taskbar although the BT connections works fine !
Ok, where do you change to the default caller ID? I tried the registry edit and changing to the default dialer skin and had the same problem. This is so frustrating! About 50% of the time when it rings I hit the answer button and nothing happens. It even takes about 10 seconds before the screen changes from the home screen to the phone screen when it starts ringing.
How big a file for the ringtone are you using? The bigger the file, IMHO, the longer it'd take for the phone to load it...
Delete your call history and the lag after hanging up should disappear.
Htc Diamond Regedit
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.
Paches and fixes
Goto HTC's website. There is a patch to resolve the issue for the delay in sound when answering calls.
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])
Shawn Botha said:
...
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])
Click to expand...
Click to collapse
This hangup delay is one of the first settings I changed when I got the phone. Almost everytime I scroll through contacts phonebooks, the phone would accidentally dial, so I press end end end repeatedly, but by the time it hangs up, the other party already had my caller id, and would call back asking why I called.
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?
atlaswing said:
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?
Click to expand...
Click to collapse
How did you changed the shooting delay in camera settings? What registry edit did you made?
joao pinto said:
How did you changed the shooting delay in camera settings? What registry edit did you made?
Click to expand...
Click to collapse
its in Schaps Advanced config 3.3 under Camera. But i digress...
it still begs the question, from an engineering standpoint, why did they set up these delays and lags?
bobok13 said:
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.
Click to expand...
Click to collapse
I don't know if you resolved your issue.
You just have to erase "~GPRS!" and type in "#777"
No quotes of course.
I use Dotfred Task Manager 3.1
Same problem
I recently got this problem with the answer lag, I was using the same rom, same applications, same everything for the past few weeks. I am not entirely sure what caused the problem.
What would happen is when I get a call and I hit the answer key, the phone stops ringing and vibrating but it would still be flashing and has the phone number shown, I also have the slider installed and when I slide it, the same problem comes up!
In my reg editor, I do not have HKLM!
Any advise would be appreciated, this is getting annoying for both sides of the call.
Thank You
UPDATE
I actually may have found the solution, I removed the wireless manager shortcut when holding the answer button, and so far it's been working very quickly.
Go to settings -> Buttons and switch "button 1" from w/e u had to "<none>" I didn't even restart my phone...
2nd Update
Nope, just got an international call and it's holding it up... maybe it has to do with caller ID ?
HKLM is HKey_Local_Machine
Ever since i installed wm6.5 (and I tried a few) I am have trouble accepting incoming calls. This is different from the lock screen issue. Whenever I get an incoming call i see it and either hit the hard key or slide left on-screen to accept but it doesn't answer but continues to ring. if I slide then the slider gets stuck all the way to the left until it stops ringing.
Any ideas as to what could cause this, I have this on different wm6.5 roms, and my friend who has the same wm6.5 rom has no problems.
Please help
well turns out it does answer but takes like a few secs to engage so if i click to answer late in the ring it doesnt have time to answr b4 the person goes to voicemail. i did use trapcall b4, and have now cacelled, maybe it is causing my problems?
any info of how I can reset att to default settings like voicemail and get 100% rid of trapcall.
I got this from a different thread and saved it to my computer just in case I bumped into this problem. I don't know if it'll work on 6.5, but you might want to give it a try:
I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.
It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...
Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.
When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.
Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.
Dude, thank you so much, I cant believe it was so simple. But I'm confused how it happened in the first place. Anyways yeah, changing SuspendResume to #777 works wonders.
I've got a slightly different Slide To Answer issue.
I just updated to the newest HTC stock rom for my Touch Pro.
I noticed on the first call that Slide to Answer was part of this rom.
It seemed to work well but suddenly I lost the slide button. The green bar for answer and red for reject are still there but the slider itself has disappeared. The only other thing I have changed since the rom upgrade is to add a cab file (from an XDA thread) that restored my Chinese fonts. Could something in that have disabled the button graphic?
What else could it be? How do I get this button back?
Also, is there a way to customize the Slide to Answer screen?
Rom: 5.07.707.2 WWE
Radio: 1.11.25.01
The Slide-to-Answer, for whatever reason, never worked right on my Fuze, so I just disable it.