Database Info

Blinking codes decoded?

My FUZE, running stock ATT rom with advanced config using the suggested settings for advanced config, other than that, all stock.
My send/dial/answer and enter (center circle) lights are flashing about 5-6 times a second then pausing for 10 seconds or so.
I've checked my email, I don't have any SMS, nobody uses MMS that I know, it just keeps on keeping on.
WHat really obvious thing am I missing?
I suppose in the scheme of things, it doesn't really matter, I think I'm going to install NATF's rom here pretty quick, but I want to get a full week under my belt before I thrash it.

Idk either man. This happened a lot for me too on the stock rom. IT seems to happen when someone calls you, but hangs up before it rings, thus ur phone gets the signal of the call, and thinks you have a missed call, but you really don't. So a soft-reset should fix that. Or flash a better radio.

mrcpu said:
My FUZE, running stock ATT rom with advanced config using the suggested settings for advanced config, other than that, all stock.
My send/dial/answer and enter (center circle) lights are flashing about 5-6 times a second then pausing for 10 seconds or so.
I've checked my email, I don't have any SMS, nobody uses MMS that I know, it just keeps on keeping on.
WHat really obvious thing am I missing?
I suppose in the scheme of things, it doesn't really matter, I think I'm going to install NATF's rom here pretty quick, but I want to get a full week under my belt before I thrash it.
Click to expand...
Click to collapse
Go into your email inbox then swipe sideways to reveal the Outook email and just check that it doesn't have the tips and tricks email sitting there. If you arent actually using the Outlook account it doesnt display in touch flo but its still there with its welcome email if you configure activesync. Good luck. Cheers.

It also flashes when receiving new articles from RSS feeds...
CU,
Cactus World

long phone lag when trying to answer a call HTC Touch Pro

Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!

Kermy33 said:
Does anyone know of a fix for the long lag in answering calls for the HTC Touch Pro? If you can help please write back in the simplest terms! I am just learning how to use the phone and finally learned how to download and install cab files.
Thanks!
Click to expand...
Click to collapse
What have you installed (to cause this problem)?

Do a search for "diamond tweak". There is an option to shorten the delay when an incoming calls rings. Perhaps that will help.

if you have S2U2 installed, you could try uninstalling or disabling that. You could also switch from the Diamond dialpad to the regular WinMo dial pad (the screen you see when go to the dialer). You can make this change using the Advanced Config Tool (i'm pretty sure, if not, then try Diamond Tweak).
There's also the initial delay value in the registry as mentioned in the last post.
These should all help, some more than others though.

there actually is an issue with Diamond tweak and advanced config...
if you use them to set your data disconnect time if re writes a registry value that makes your phone fritz when trying to answer calls.in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.

weird.....suspendresume on mine shows ~GPRS! as a value??
schollianmj said:
in reg editor go to HKLM/comm/connmgr/planner.
Look for a entry of suspendresume. change that to #777. shold cure your issue. while you are there if you want to help out your battery change the Cachetime value to 60. that will kill your data afret 60 seconds of no use.
Click to expand...
Click to collapse

thanks for the suggestions and how do I fix the hang up lag?
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?

Kermy33 said:
The slow delay in answering calls was a problem right out of the box. When I installed the slide to answer function the phones responsiveness greatly improved. There is also a huge lag from the time I end a call to the time I can go back to my home screen. Any suggestions for fixing that lag?
Click to expand...
Click to collapse
no idea, but i have the same thing

No luck with the tweak mentioned in post #5. However, after I replaced the HD CallerID with the default WM one (which is not that bad!) the phone responds rapidly :
1) Zero lag between first caller's ring and screen respond.
2) Almost zero lag between first caller's ring and bluetooth handset ring.
3) Less than 0.5 ring before the device starts ringing.
Only a minor problem : The bluetooth icon does not show any more on the taskbar although the BT connections works fine !

Ok, where do you change to the default caller ID? I tried the registry edit and changing to the default dialer skin and had the same problem. This is so frustrating! About 50% of the time when it rings I hit the answer button and nothing happens. It even takes about 10 seconds before the screen changes from the home screen to the phone screen when it starts ringing.

How big a file for the ringtone are you using? The bigger the file, IMHO, the longer it'd take for the phone to load it...

Delete your call history and the lag after hanging up should disappear.

Htc Diamond Regedit
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.

Paches and fixes
Goto HTC's website. There is a patch to resolve the issue for the delay in sound when answering calls.
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])

Shawn Botha said:
...
Regarding the delay after the phone cal has been discontinued use "Advanced_Configuration_Tool_v3.3" (search this site). There is a setting that you can change to resolve it (default is 3000ms[3sec])
Click to expand...
Click to collapse
This hangup delay is one of the first settings I changed when I got the phone. Almost everytime I scroll through contacts phonebooks, the phone would accidentally dial, so I press end end end repeatedly, but by the time it hangs up, the other party already had my caller id, and would call back asking why I called.
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?

atlaswing said:
Why is this 3 sec delay built-in? There must be a reasoning behind it.
And while we're on the delay issue, why did they set the camera up with a 3-5 second delay to shoot? Is it for the autofocus? I got rid of the reg setting, now the camera is faster, and no autofocus issues... so why were these delays there to begin with?
Click to expand...
Click to collapse
How did you changed the shooting delay in camera settings? What registry edit did you made?

joao pinto said:
How did you changed the shooting delay in camera settings? What registry edit did you made?
Click to expand...
Click to collapse
its in Schaps Advanced config 3.3 under Camera. But i digress...
it still begs the question, from an engineering standpoint, why did they set up these delays and lags?

bobok13 said:
Hello,
I have a problem with my HTC.
I used PHM Regsitry. I found the Suspendresume key, and it wrote GPRS!
I clicked the key, and because I did not know who to change the value, I just wrote #777.
Now when I try to go there and change what I did, when I click Settings in regedit, it is emty or the program crackes.
Please help.
Click to expand...
Click to collapse
I don't know if you resolved your issue.
You just have to erase "~GPRS!" and type in "#777"
No quotes of course.
I use Dotfred Task Manager 3.1

Same problem
I recently got this problem with the answer lag, I was using the same rom, same applications, same everything for the past few weeks. I am not entirely sure what caused the problem.
What would happen is when I get a call and I hit the answer key, the phone stops ringing and vibrating but it would still be flashing and has the phone number shown, I also have the slider installed and when I slide it, the same problem comes up!
In my reg editor, I do not have HKLM!
Any advise would be appreciated, this is getting annoying for both sides of the call.
Thank You
UPDATE
I actually may have found the solution, I removed the wireless manager shortcut when holding the answer button, and so far it's been working very quickly.
Go to settings -> Buttons and switch "button 1" from w/e u had to "<none>" I didn't even restart my phone...
2nd Update
Nope, just got an international call and it's holding it up... maybe it has to do with caller ID ?

HKLM is HKey_Local_Machine

HTC Touch PRO 2 - FULL OF BUGS - Please review these and let me know!!!!!

Hi Everyone -
I have used the HTC touch PRO for about 3 weeks now and I have to say it is FULL of bugs . Can you guys confirm or deny this:
1. If the phone is set to vibrate, it will go back to "RING" after a single call. Meaning if someone calls me once, it will go back to RING. This also happens if the ringer is set to Vibrate and Ring also.
2. When you make a call using the "dial pad", the "dial pad" disappears very quickly and goes to the main screen. Then you have to hit the DIAL button and then KEYPAD to get it back. It is very annoying when you call your bank or an airline where you have to go through a series of promts like entering your ID numbers, pins, etc.
3. The camera seems to come on sometimes by just touching the screen.
4. If you have multiple numbers associated with a contact (home, work, mobile etc), it shows one number when dialed. For example, when I dial my friends HOME number, it dials the home number correctly, but on the display it shows the MOBILE number being dialed.
5. Unable to send a CONTACT's info by SMS directly from the CONTACTS page. It will send a MMS but not a SMS. THis is when someone asks for a phone number of a person and you just want to send it automatically from your phone book.
I am sure there are other bugs also, but the above are the most annoying as hell.
I want to make sure this is with everyone or just my phone!
Thank you

hey,idk how helpful this willbe but it seems like these phones str8 out of the box are having problems...ive read that a hard reset will get rid of some of the unwanted bugs...you may try that

1. Just tested and after call vibrating stayed on.
2. The keypad goes away but not to the home screen. So all I have to do is hit on key, keypad to get back to it.
3. never had that happen.
4. Confirmed. Seems to default to the first number stored maybe??
5. Confirmed. Most likely because it is sending the vcard or something as an attachment???

zalez said:
1. Just tested and after call vibrating stayed on.
2. The keypad goes away but not to the home screen. So all I have to do is hit on key, keypad to get back to it.
3. never had that happen.
4. Confirmed. Seems to default to the first number stored maybe??
5. Confirmed. Most likely because it is sending the vcard or something as an attachment???
Click to expand...
Click to collapse
My experience is the same with the Verizon branded TP2.
#5 It sends it as vCard attachement.
I Just open the contact info to edit then copy and past it into SMS.

Returning TP2 tomorrow
Used the TP2 for 3 weeks;
1. Screen clicks when touched, guess the slider hinge is loose;
2. Set vibrate then ring, keeps going back to ring only everytime the phone is powered off and back on, (standby on); this is the mode I use often, not to annoy people in meetings, and not to miss calls;
3. Cant set screen dim time to more than 10seconds, it dims after 10seconds no matter what the settting is;
4. Internet brower lunch from home gets stuck randomly, have to hit end go back to home, then internet again;
5. GPS performance with Sprint Navigation is much worse than Touch; It takes much longer to lock, and it lose GPS often; Maybe a software thing, Google map seems to work fine.
Non of the bugs are serious, but very annoying! The phone is too big, too heavy, too expensive ($349 from Sprint)! Miss the dial pad; The only good thing is the beautiful screen.
Hopefuly WM6.5 upgrade will fix these, but dont want to get stuck with waiting for the upgrade, I've just re-activated my old touch, and returning TP2 tomorrow.

You can add the issue of not being able to keep static IP's assigned to the network adapter for use while in your workplace or business, and then when not in the workplace haveing the ability to use sprints data services. In otherwords everything has to be dynamic. If you want to use static ip's while in range of wifi, you have to clear it out when you leave the wifi spot in order to use regular evdo.

gps is fast and accurate
fast if you disable touch flo and use mobile shell

Another bug
When viewing NFL mobile, after about two minutes into showing something, the phone reboots itself. Quite annoyin'!

arifiano said:
Hi Everyone -
I have used the HTC touch PRO for about 3 weeks now and I have to say it is FULL of bugs . Can you guys confirm or deny this:
1. If the phone is set to vibrate, it will go back to "RING" after a single call. Meaning if someone calls me once, it will go back to RING. This also happens if the ringer is set to Vibrate and Ring also.
2. When you make a call using the "dial pad", the "dial pad" disappears very quickly and goes to the main screen. Then you have to hit the DIAL button and then KEYPAD to get it back. It is very annoying when you call your bank or an airline where you have to go through a series of promts like entering your ID numbers, pins, etc.
3. The camera seems to come on sometimes by just touching the screen.
4. If you have multiple numbers associated with a contact (home, work, mobile etc), it shows one number when dialed. For example, when I dial my friends HOME number, it dials the home number correctly, but on the display it shows the MOBILE number being dialed.
5. Unable to send a CONTACT's info by SMS directly from the CONTACTS page. It will send a MMS but not a SMS. THis is when someone asks for a phone number of a person and you just want to send it automatically from your phone book.
I am sure there are other bugs also, but the above are the most annoying as hell.
I want to make sure this is with everyone or just my phone!
Thank you
Click to expand...
Click to collapse
1. I've heard of this happening after soft reset but it doesn't happen on my phone
2.Works perfectly fine on mine, all you do is hit the 'Keypad' button and it should stay up. if you end up at the home screen hit 'phone' and then keypad and you should be good....do you have a dialer skin on it?
3.Never happens for me
4. haven't tried, i don't have any contacts with multiple numbers
5. haven't tried but i usually just copy/paste phone numbers for sms
definitely try hard reset. and if it's got a warranty or anything like that you still have the option to return/exchange it

well speak of the devil my phone started showing some of these symptoms later in the evening and now even worse when i make calls i can hear people talking but they can hear me
a hard reset fixed it but when i restore my backup files it goes back to messing up so maybe it's one of the tweaks i ran?

is there a way to use sprite mobile to only restore contacts/sms? that's all i really need i'll think i'll hold off on the tweaks and just wait for the HSPL unlocker

Hope these problems are all fixed when the HardSPL is released.
As for now, I am holding my breath waiting to see if the gps problem is fixed on a new rom, waiting to buy this phone.

abuttino said:
Hope these problems are all fixed when the HardSPL is released.
As for now, I am holding my breath waiting to see if the gps problem is fixed on a new rom, waiting to buy this phone.
Click to expand...
Click to collapse
yeah, the real messed up part is verizon is out of stock with the phone. i went to a verizon store but they couldn't even replace it for me. i think the people over there are retarted cuz i've known it was out of stock but the dudes at the store didnt know and the guy they had me talking to on the phone didn't even know they didn't sell them in stores!
'you'll probably get the imaggio isntead it's the upgrade of your phone'...no stupid i need a keyboard

mine keeps switching from Ring and Vibrate to Ring as well

Any Way to stay in keypad mode during call?

My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.

I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.

yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.

Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!

I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.

AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?

MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.

If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!

MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!

I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!

I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?

AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.

Problems with screen locking during calls.

Ok, this is probably going to be a complete noob type solution, but it's got me stumped.
My screen locks during calls. Can still see all the buttons (End, Keypad, Speaker etc) but they are all disabled. Not a huge problem on a normal call as I can use the hard button to end the call but makes it impossible to use voicemail etc which need the keypad.
I'm using S2U2 along with NRG CHT ROM but nothing else I can think of which may be affecting the screen.
Been right through the settings in S2U2 but the best I could manage was switching the "Lock On Talk" to "BT Only" which made it work for one call and I was able to use my voicemail but then tried again and it's all locked up again.
Anyone else had this or know what might be causing it.

Hi there, not to sure what could be causing that... I had the same problem months ago, a Hard Reset sorted out the problem. Think it was something i installed, not sure what