Ok, this is probably going to be a complete noob type solution, but it's got me stumped.
My screen locks during calls. Can still see all the buttons (End, Keypad, Speaker etc) but they are all disabled. Not a huge problem on a normal call as I can use the hard button to end the call but makes it impossible to use voicemail etc which need the keypad.
I'm using S2U2 along with NRG CHT ROM but nothing else I can think of which may be affecting the screen.
Been right through the settings in S2U2 but the best I could manage was switching the "Lock On Talk" to "BT Only" which made it work for one call and I was able to use my voicemail but then tried again and it's all locked up again.
Anyone else had this or know what might be causing it.
Hi there, not to sure what could be causing that... I had the same problem months ago, a Hard Reset sorted out the problem. Think it was something i installed, not sure what
Related
i have a strange problem and its the same as this one
http://www.everythingtreo.com/forum/treo-750/cant-answer-phone-on-750-a-11588.html
Sometimes when the phone ring i can push the green button or the softbutton but the phone didn't pick up. After a while the phone goes into voicemail.
The phone is working correctly after that and no soft reset is neccesary.
It looks like the problem has something to do whena lot off programmes are in the memory because it looked lit it happends more often with more programmes open.
Does anyone has an solution?
iNiels said:
i have a strange problem and its the same as this one
http://www.everythingtreo.com/forum/treo-750/cant-answer-phone-on-750-a-11588.html
Sometimes when the phone ring i can push the green button or the softbutton but the phone didn't pick up. After a while the phone goes into voicemail.
The phone is working correctly after that and no soft reset is neccesary.
It looks like the problem has something to do whena lot off programmes are in the memory because it looked lit it happends more often with more programmes open.
Does anyone has an solution?
Click to expand...
Click to collapse
You should provide us with more info.
What apps do you have installed?
What apps are running when this occurs?
What tweaks did you make?
etc.
It's hard to say if it's because of the memory or due to a call filter program like MagiCall
mccune said:
You should provide us with more info.
What apps do you have installed?
What apps are running when this occurs?
What tweaks did you make?
etc.
It's hard to say if it's because of the memory or due to a call filter program like MagiCall
Click to expand...
Click to collapse
I have no tweaks installed
programmes:
phoneweaver (tried to switch off but didnt help)
agendaone
TOMTOM
Calander+
hidelogo
SPB phonesuite
SPB Weather
iNiels said:
I have no tweaks installed
programmes:
phoneweaver (tried to switch off but didnt help)
agendaone
TOMTOM
Calander+
hidelogo
SPB phonesuite
SPB Weather
Click to expand...
Click to collapse
You could try to remove PhoneWeaver or PhoneSuite, since they share some functionality...
Go into settings/owner information/options and make sure thetwo boxes in there are unchecked. There is a bug which will prevent you from being able to answer the phone properly if those two buttons are checked...
mikej4 said:
Go into settings/owner information/options and make sure thetwo boxes in there are unchecked. There is a bug which will prevent you from being able to answer the phone properly if those two buttons are checked...
Click to expand...
Click to collapse
Let us know if this works, never heard of this
They are both uncheked already!
I had the same problem and in my case found out this happens when receiving an sms. The phone become unresponsive before the sms arrives, and this can last for several seconds. If you happen to receive a call in that period, you won't be able to answer.
Could not find a solution to this problem.
Try disabling voice commands as per the following:
http://kb.palm.com/SRVS/CGI-BIN/WEB...00000000684754152,K=9400,Sxi=6,Case=Obj(43101)
Seemed to work for me.
I'd like to disable the phone from waking up when i get a text message... If i get one while the phone is in my pocket, the act of pulling it out keeps on resizing my text for some reason...
I have diamond tweak and the "wake on sms" is disabled, but it still does it... I've tried enabling it and disabling it again to no avail...
Anyone have any suggestions?
I have advanced config, diamond tweak, and total commander if any can get the job done.
Run phoneAlarm - which controls phone profiles and many other aspects of how your phone operates. It has an option to keep the phone from waking up on SMS.
The re-sizing may come from your touching around the D-Pad as you pull the phone from your pocket. That's what I was doing an it had me totally baffled for about a week - until I accidentally discovered that you could change the font size by running your finger around the action button.
Hrmm... phoneAlarm looks like it's a huge hastle to put in and i rather like the touch flo... wouldn't want to disable it to put in something else for this one feature I'm looking for...
I'm just miffed though... The registry key:
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
is already set to 1... it should be disabled... but it still wakes up...
can anyone tell me why?... I DO have the sprint (cdma) version if that makes any difference but i don't think they would have jacked with sms wakeup...
bump... anyone know how to help with this?...
it's driving me nuts trying to figure out why it's not working as intended...
i also tried different things to not wakeup the phone on sms but nothing worked.
does anyone have a solution???
I have turned it on and off several times to see if I could replicate your issue and I cannot. There is an issue with your phone disregarding that Diamond tweak setting. There are a few things I would look at, are you running the stock ROM or did you flash one? What applications have you loaded on the phone one might be conflicting or overriding that setting. If I just could not figure out what could be causing this issue I would hard reset and before I load anything I would test to see if it works or not.
-McMex
Ever since i installed wm6.5 (and I tried a few) I am have trouble accepting incoming calls. This is different from the lock screen issue. Whenever I get an incoming call i see it and either hit the hard key or slide left on-screen to accept but it doesn't answer but continues to ring. if I slide then the slider gets stuck all the way to the left until it stops ringing.
Any ideas as to what could cause this, I have this on different wm6.5 roms, and my friend who has the same wm6.5 rom has no problems.
Please help
well turns out it does answer but takes like a few secs to engage so if i click to answer late in the ring it doesnt have time to answr b4 the person goes to voicemail. i did use trapcall b4, and have now cacelled, maybe it is causing my problems?
any info of how I can reset att to default settings like voicemail and get 100% rid of trapcall.
I got this from a different thread and saved it to my computer just in case I bumped into this problem. I don't know if it'll work on 6.5, but you might want to give it a try:
I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.
It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...
Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.
When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.
Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.
Dude, thank you so much, I cant believe it was so simple. But I'm confused how it happened in the first place. Anyways yeah, changing SuspendResume to #777 works wonders.
I've got a slightly different Slide To Answer issue.
I just updated to the newest HTC stock rom for my Touch Pro.
I noticed on the first call that Slide to Answer was part of this rom.
It seemed to work well but suddenly I lost the slide button. The green bar for answer and red for reject are still there but the slider itself has disappeared. The only other thing I have changed since the rom upgrade is to add a cab file (from an XDA thread) that restored my Chinese fonts. Could something in that have disabled the button graphic?
What else could it be? How do I get this button back?
Also, is there a way to customize the Slide to Answer screen?
Rom: 5.07.707.2 WWE
Radio: 1.11.25.01
The Slide-to-Answer, for whatever reason, never worked right on my Fuze, so I just disable it.
just wondering if anyone has had any issues with the unity lock screen when answering phone calls? I have the inspire with the latest unity rom and for some reason when i get phone calls the lock screen doesnt show up? its as if i already answered it but its still ringing and i have to end the call and then call them back
any suggestions on what might cause/fix this would be greatly appreciated as this is very irritating!
Are you saying that you don't have the answer call button showing, just the end call button? If that is what you are referring to do you also have the application from the market called No Lock on your phone? I had a similar problem and I traced it back to an incompatibility with that application on the VU rom. It messed up the system. It sounds like you might be describing a similar situation. It could be that app or another similar app.
Well the whole lock screen doesn't appear when I'm getting a phone call, I can't answer or decline it, its as if I have answered the call but its still ringing, ill take a screenshot if i can next time it happens..
Also I have go launcher installed and discovered that sometimes when i clear that as the default homescreen it resolves this, could be a similar incompatibility maybe? That's the only thing I can think of but i don't know why that would cause it
Sent from my Inspire 4G using XDA App
oh and also i have an app called proximity screen off so i can turn the screen off with the proximity sensor, not sure if that has anything to do with it but figured its worth mentioning
It might be. I have found that certain apps that I used to use do not behave well with Sense 3.0 roms. The only way that I found out which ones was to do a fresh install and then install one at a time and see what happens after they have been installed for a while. It was a pain but I was able to figure out a few apps which screwed up the system.
Turns out to have been the proximity screen off app
Hello, on my new zfold2 the incoming call screen does not show when calls arrive. The phone rings, but the lock screen remains, basically i cannot answer the call until I unlike the device, go to the pull down menu and then see the incoming call to be able to answer it. I've searched whether there is a setting for this, but nothing...anyone can help me? thanks.
Same here. Fix?
dgardel said:
Same here. Fix?
Click to expand...
Click to collapse
I have not found anything yet. Must be a setting issue, i Hope!
Same here.
I've been using the Google dialer since using this phone and have had no issues. Not sure if this is really the answer that you're all looking for, but it may be a workaround for you until the stock phone app is updated.
https://play.google.com/store/apps/details?id=com.google.android.dialer
I too was facing issues with the stock phone dialer, though the issue was different. It was not registering my touch or registering it after repeated attempts while wanting to make calls. Touch screen otherwise works fine.
Using a different Dialer now - True Phone app. and all issues of touch have been sorted out.
I had that problem, turns out for my problem was that I had do not disturb turned on. Doubt that's the same for you guys but just thought id share. Thanks.
Have you found any solution?