HTC S710 Big problem help me - HTC Vox

my set only boot bootloarder mode
Vox wifi
ONBL 1.22.0000 Hitachi
Vox
SPL 1.22.0000
IU
Vox
CPLD - 04
how to solved this problem .........?

ou need to reflash with original htc rom
need to get into bootloader mode!
this will flash the original bootlaoader and radio rom
then unlock like described in first treath!(uspl)
but charge your battery before if possible!

actually set dead how to flash which rom ........? plz tell me help me

Related

Jamin bricked WM6 IPL SPL 1.00

Hi!
Please help ......... SOS
I bricked my friend's Jamin
It booted fine after I put wm6 but now after I rebooted it,it shows the splash screen with imate logo : ipl : 1.00 , spl : 1.00.0000 , gsm: 01.14.20 , os : 10.1.0.811
any ideas ? pleasee help.......
same thing happened to me when it was softreset with a charger connected. Try removing the battery and/or hardreseting it. should do the trick
just try to hardreset..and then flash it with new ROM

S200 Stuck in qtek screen

my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?
GeNoO said:
my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?
Click to expand...
Click to collapse
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance
bootloader mode
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.
Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
akatwinky said:
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.
Click to expand...
Click to collapse
ohlala wwe 2.0 doesnt work - I does say that if you read the whole thread :-o
GeNoO said:
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance
Click to expand...
Click to collapse
flykthewiz said:
Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
Click to expand...
Click to collapse
Yeah, I didn't realize that it was a G4. Thats a Newbie issue

Bootloader please help

mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
^^ ...
hahaha....
now .... charging your phone ... and then turn on your PDA , at the bootloader screen (red,blue,green ... ) , connect you phone with PC .... you will see the USB at the bottom of the screen ... then .... install with the original ROM ...
here is the ROM
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip
i allready did that, and the error 300 keeps coming
what else can i do
ac ... ^^
your phone is G3 .... not G4 ... ^^
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000 is G3
try G3 ....
did you read it before !!!
http://forum.xda-developers.com/showthread.php?t=321839

Help help help

I have a Imate Jamin, Well i never upgraded it so i tried to upgrade to Gullum WM6 touch, I tried to upgrade through this method http://forum.xda-developers.com/showthread.php?t=323013
But i had battery error battery was below 50%, so i upgraded it through Shell tool, i didn't knew its camera button is not working, after flashing complete i couldn't hard reset device so i have to flash to through RUU again, After this IPL and SPL both were 1.XX, OS 2.20.XX. but after it was complete it is stuck on imate splash screen, Then i flashed it with official RUU after which my Ipl, SPL and Rom where back to 1.XX but no results, and then someone here suggested to Flash with PROPHET NVID RUU i also did that now my splash screen is Qtek Ipl 1.00 Spl 2.20.00 Gsm 02.47.21, OS 2.20.7.34 but still it is stuck on slash screen, in all case USb is been detected and i m able to load bootloader through Holding Power off and Communition Mana Buttons. Please help me and reply what should i do now. I think my Phone is Bricked and dead.
Thank you,
Arvin.

vox e650 death - problem

hi customer gives me vox e650 after water damage i clean but now i can put only into test mode 3 colours bars info from service mode:
vox onbl 1.22.0000 wifi hitachi
vox spl 1.22.0000
vox cpld - 04
i need image for this set
best regards
deejaybialy
you are a mobile technician?
this is the link for the rom
ftp://xda:[email protected]_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe
I got the same when try update rom I got all time rom corupted and can't do anything any help will be welcome I got killed phone only turn on in boot mode and need help. bye
c650
wgmmmx said:
I got the same when try update rom I got all time rom corupted and can't do anything any help will be welcome I got killed phone only turn on in boot mode and need help. bye
Click to expand...
Click to collapse
i have solution for u prive me [email protected]l or gg:3640389
br

Categories

Resources