Database Info

S200 dont boot

Hi everyone,
My qtek s200 dont boot, i just try hardreset, update rom in bootloader but nothing result..
Qtek stays in operator logo
IPL 2.10.0001
SPL 2.10.0001
GSM 02.69.21
OS 4.0.0.0
This happens because i was trying update rom to os 4.0.0.4 and there was a error during de instalation.
Then i try connecting again with activesync 4.5 but there was no conection.
now the qtek dont boot to operating system
Help me please.....

downgrade to wm5,upgrade to wm6,everything should work fine.

wich file?
how can i downgrade to wm5 without activesync?
by bootloader?
Wich file and where i find?
Thanks for your help!!

finally i ugprade to prophet 2.20.7.34 and my s200 is alive again...
Thanks....

How? Same problem here

same problem

i have tried again again end again, and now it's ok
note :
at the end of step 1, when s200 said "tap on screen" -> i have taped
after i have start step 2 as indicated in the tutorial

Good afternoon,
first you must conect pu s200 in bootloader mode (press camera button and make reset with your sylus pen- screen must appear three colors) then plug usb cable, then run the upgrade/downgrade rom
In the end the qtek reboot, install de apps and you must make software reset
Bye
Ratzumen

I have the same problem here. I had the wm6 rom on my qtek s200, but my headset worked not fine with it. So i tried to downgrade to the aku 3 rom for my s200. It seems ok. But when i turned the pda on, id didn't go further that the qtek boot screen. I also could not get to the bootloader screen to update another rom. What can i do?

Bootloader please help

mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me

^^ ...
hahaha....
now .... charging your phone ... and then turn on your PDA , at the bootloader screen (red,blue,green ... ) , connect you phone with PC .... you will see the USB at the bottom of the screen ... then .... install with the original ROM ...
here is the ROM
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip

i allready did that, and the error 300 keeps coming
what else can i do

ac ... ^^
your phone is G3 .... not G4 ... ^^
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000 is G3
try G3 ....
did you read it before !!!
http://forum.xda-developers.com/showthread.php?t=321839

imate Jamin Strucked

My imate Jamin struck at bootloader
showing:
IPL 1.00
SPL 2.20\
what can i do now???????

Please read this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
If you got stuck in bootloader, you did not HardSPL properly.

Sync failed after hardspl install ( dopod 818 pro )

could please anyone resolve this for me.......
After i run hardspl ,i do a soft reset .. then i try to connect again but activesync not moovin at all.... it's appeard usb did not recognise and windows failed to read........
mine is :
ipl 2.20.0001
spl 2.15.0001
os 2.15.0001

[Q] Please Help. - Prophet Bricked

Hi.
I tried to update my SO to WM6 (crap). The system hanged and now the phone is bricked.
All I can see is the HTC logo followed by the operator splash screen with the following info:
IPL : 2.20.0001
SPL : 2.10.0001
GSM : 02.07.20
OS: 4.0.0.0
.... NOTHING MORE!!!
Help would be very apreciated.
Thank you
Hugo