my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?
GeNoO said:
my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?
Click to expand...
Click to collapse
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance
bootloader mode
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.
Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
akatwinky said:
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.
Click to expand...
Click to collapse
ohlala wwe 2.0 doesnt work - I does say that if you read the whole thread :-o
GeNoO said:
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance
Click to expand...
Click to collapse
flykthewiz said:
Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
Click to expand...
Click to collapse
Yeah, I didn't realize that it was a G4. Thats a Newbie issue
Related
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
i have the same problem too, i used g4 rom and now its stuck at bootloader rainbow screen.
my IPL is 1.00
SPL is 2.20.0001
jester gold card
after lots of looking and reading of threads i need to wait for Jester Gold Card
come on jester work your magic my M600 is now a paper weight.
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
Hi,
Its very common to do mistake of flashing G3 device with G4 rom, and
no of people doing this mistake increasing every day.
Its very sad to have a bricked device, rather it wud hav been better
to search the forum thourouly before making attempt to flash.
Yes the only hope is Gold Card Project success,
We all r waiting for that day!
ic. Gold Card Project
anyway i did a stupid mistake that lead my prophet into a paper weight.
i click on the G4 rom thinking thats step 2...
now i cant down grade back to old wm5
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
CooT said:
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
Click to expand...
Click to collapse
no, u cant flash anything now as g4 rom is inside a g3 device
and the moment u try to "downgrade" it will prompt for a NEWER FILE to be used
my m600 stucked at very starting screen help me plz
hi guys
i got a orange spv m600 i tried to unlock it from the stuff which i got online but instead i messed up the phone
its stucked at the vry first screen showing a orang logo
and
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
could any one help me out plz plz plz i am a new person and i dont know any thinig about this roms or any software u can email me my emial id is
[email protected]
subject m600(plz dont forget to mentioned in the subject field) bcoz i get loads of junk mail that y i delete them
thanks
Same Problem
I have a fried M600 that is also stuck in the "Orange" Screen when turned on...
How can I get past this?
I have tried re-installing the original ROM but it still refuses to boot.
What Installer do I need to download?
Which ROM would do the trick?
How do you install CAB files without Activesync?
Can anyone help me on this as I'm lost without my M600.....
Hi,
I try to change ROM from PDAMobiz Prophet WM6 V1.00 to Fantastic Mobiz XBow v1.1i. I made exactly what I was suppose to do. But after few minute i've got the error 300 "INVALID UPDATE TOOL". So I reset my S200, then it's stay on the blue page QTEK until I reset it. I try to upgrade again, but when i'm in the Bootloader mode, i connect the PDA, the letter USB appear on the PDA screen, but i've got the message "No device Connected, Would you like to try copying again", even if i still try few minutes later, it's stil say no device connected.
I don't know what can i do anymore.
Please need Help
Thanks for your help
Benjamin
What S200 you have? G3 or G4? What IPL/SPL Version?
Have you tested to use Step 2? Step 2 use a other Firmware Writer ...
G3
IPL: 2.10.0001
SPL: 2.20.0001
i don't know any other Firmware Writer. Can you tell me one please and where i can find it
thanks
ahm ... IPL/SPL with 0001 is a G4 ... have you write the G3 Firmware? if yes ... you have brick your phone!
by Brick , you mean it's definitly broken, i can do anything?
i was quit sure i used G3 version.
Do you have your dockingstation? Load your Batterie! Then try to enter the bootloader Mode! If you have black screen again ... send it back to you mobile provider and hope they exchange it.
no i don't have any dockstation.
so someone have more proposition please???
can you bring your device into bootloader screen?
from a first view it doesn't seem you bricked it (usually ipl and spl differ then (one is 0000 and one is 0001).
And as you still get an USB Icon i assume it is not broken (but i can't say that for sure).
Just try entering bootloader mode an then flash again (with a g4 firmware!) - see wiki for how to enter BL mode
my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !
what was the last think you have do?
flashing does ipl spl version?
the last is i flash ipl 3.08 and spl 3.08
RE:Help
hanyean1 said:
my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !
Click to expand...
Click to collapse
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693...24721_NVID.exe
2. Get in to the bootloder mode
3. connect your USB
4. execute the AKU2.2 rom
Then you should be back on track!
i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do
hanyean1 said:
i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do
Click to expand...
Click to collapse
for how long do you wait ?! it's normal to be stuck on 95% for awhile, just don't touch your phone, it will continue !
wait till the end and it show error
calm down, be patient
just do the step philchen1979 posted. do it every step very carefully do not miss any step. you should get it back on. if you already done it, then do it again carefully. use the rom philchen direct you, that's the best rom to flush an almost dead prophet.
good luck.
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS
melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547
aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~
help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?
have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..
Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..