Database Info

upgrad prblem jamin

i madd up date for my pocket prophet imate jamin with ver
RUU_Prophet_220734_2207114_024721_NVID.exe
RUU_Prophet_220734_2207114_024721(AKU2.3)_lvsw_edition_PS8Mb.exe
but when i made restart i got spalsh screen and pocket hange .
i can not solve this problem can u hlp me .

eltabry said:
i madd up date for my pocket prophet imate jamin with ver
RUU_Prophet_220734_2207114_024721_NVID.exe
RUU_Prophet_220734_2207114_024721(AKU2.3)_lvsw_edition_PS8Mb.exe
but when i made restart i got spalsh screen and pocket hange .
i can not solve this problem can u hlp me .
Click to expand...
Click to collapse
1. dowenload this latest i-mate official rom from here
2. enter your jamin into bootloader mode by pressing power +camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the jamin to your pc (make sure your battery is fully charged)
4. run the i-mate official rom.
5. good luck!

SAME PROBLEM with JAMin
I've tried this rom but I received this massage.
"ERROR[296]: UPGRADE ONLY"
IPL 1.00
SPL 2.20.0001

S200 Stuck in qtek screen

my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?

GeNoO said:
my s200 got stuck in the qtek screen , now i cant connect it to active sync so i can flash the rom again ! is that a way to get in the bootloader so i can flash it again , without any sort of connection of the phone to the laptop how can i flash it?
Click to expand...
Click to collapse
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance

bootloader mode
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.

Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
akatwinky said:
Install ActiveSync 4.5 (needed for WM6) and find out if your device is G3 or G4 before applying any of the 'Steps'.
Download ROM FantasticMobiz v1.0 and extract the files
Enter the bootloader on your device (soft-reset using stylus, while holding down the camera-button, until 3-colorscreen appears)
* Plug in the USB-cable (text 'USB' will appear in lower-left corner of the screen)
* Now execute either the ROMUpdateUtility_NV_G3.exe or ROMUpdateUtility_NV_G4.exe, located in Step1.rar.
After this, apply the rom you want to use.
Click to expand...
Click to collapse

ohlala wwe 2.0 doesnt work - I does say that if you read the whole thread :-o
GeNoO said:
it says :
IPL : 2.10.0001
SPL : 2.15.0001
GSM : 02.30.21
OS : 10.2.0.8
... and never comes out...
it happen after i try to flash a rom to ohlala wwe wm6 2.0 rom...
Help is needed
Thx in Advance
Click to expand...
Click to collapse

flykthewiz said:
Not bad for a 1st post
The guy does have a G4 (.0001 spl) hop you haven't confused him :-o
Click to expand...
Click to collapse
Yeah, I didn't realize that it was a G4. Thats a Newbie issue

Help for my dopod 818pro

my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !

what was the last think you have do?
flashing does ipl spl version?

the last is i flash ipl 3.08 and spl 3.08

RE:Help
hanyean1 said:
my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !
Click to expand...
Click to collapse
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693...24721_NVID.exe
2. Get in to the bootloder mode
3. connect your USB
4. execute the AKU2.2 rom
Then you should be back on track!

i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do

hanyean1 said:
i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do
Click to expand...
Click to collapse
for how long do you wait ?! it's normal to be stuck on 95% for awhile, just don't touch your phone, it will continue !

wait till the end and it show error

calm down, be patient
just do the step philchen1979 posted. do it every step very carefully do not miss any step. you should get it back on. if you already done it, then do it again carefully. use the rom philchen direct you, that's the best rom to flush an almost dead prophet.
good luck.

{URGENT HELP} I have installed my Magician with Phrophet.. HELP

i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..

Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..

spv m600 on rgb screen ????

Hello
i have an spv m600 work fine, i send to it an application after install , it reboots, and it shows the boot screen orange+ windows mobile,
i try many times soft and hard reset , now it shows only bootloader mode and some IPL 2.10.0001 SPL 2.10.0001 . chip is G4 ,
i search to flash it with new rom ,
i ask about compatibility of roms , if i can update with wm6? and some links if ready , or how to make please .
utility and roms
Thanks you very mutch.

First, you must recover the device. see here
Then:
You can update the ROM.
You must first, SIM unlock the device. here
Then you must HardSPL your device here
Then, you can choose which ROM to use. See here

i dont undersatnd
please the prophet with activ synchro cant connect
please more explications

1.Determine do you have G3 or G4 (when softreset G3 shows on screen: SPL .000 or .0000 and G4 .001 or .0001 - YOUR IS G4
2. Download and install ActiveSync 4.5 (Microsoft web page)
3. Download ROM (my suggestion PVTemp) and unzip somewhere on desktop
4. If your device is locked unlock it using lokiwiz
5. Connect device to PC ( running WIN XP suggested) and sign as a GUEST
6. Disconnect and go to bootloader mode -pres COMM button and after that soft reset with pen, relise pen in few seconds and your screen should show RGB colors. DEVICE BATTERY MUST BE ABOVE 50%!
7. Connect your PDA on PC (it will show USB on screen, down left)
8. Go to directorx and run ROMUpdateUtility_NV_G4.exe (if its G4) or ROMUpdateUtility_NV_G3.exe (if its G3)
9. Follow instrucions on PC screen
10. After some time (10min) PDA should finish and do a restart-it usualy stuck on 0% and 85%, but dont panic and wait, it sould continue!!
11. Enjoy new ROM!
you can start with bootloader mode!

thank youi very mutch
my spv is g4 and unlocked
can you give exact rom that i can be sure working
thank youuuuu

ROM
http://www.v-dog.net/XDA/PVTemp.zip
It works on 3 XDA neo (S200) I have flashed since yesterday!