Related
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
HardSPL Info
kingsizeriz said:
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
Click to expand...
Click to collapse
I think most of the info, and donwload links that you're looking for are at the following link below. Hope that helps you.
http://forum.xda-developers.com/showthread.php?t=498320
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
HardSPL
kingsizeriz said:
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
Click to expand...
Click to collapse
I don't believe anything has changed in regards to installing a HardSPL to a phone. I've been following the same procedures for the last year or two. The Jump Spl files are used when changing / updating your HardSPL via ActiveSync (the only way I do it). Following the instructions on the thread below works like a charm, I've never had a problem. The instructions say HardSPL v3.29, but you can use any of the current HardSPL's just the same.
http://forum.xda-developers.com/showthread.php?t=433835
Fair enough, as im used to just hardspl'ing the device rather than jumpspl then hardspl.. will do it by the book though when i get my new one (if i manage to sell my poxy blackberry!!!)
All the SPL types are on the SPL Questions wiki page in detail, so I'll save myself repeating.
The reason for the 1.* and 3.* different SPL versions is for WM 6.0 and 6.1 respectivly.
See my Hard SPL sticky for another breif overview.
Dave
I downloaded Several Roms but can't intall them completely my hard spl is 3.29 and rom version is 3.34 and os is wm6.1 wwe so whenever is tried wm6.5 Rom it stucks on 0%
any one can help me out thanks in advance
Are you using the .exe file provided to flash?, in that case, try by flash a new ROM from your SD card. Rename the .nbh to KAISIMG.nbh, in your SD card (1 Gb is the best) and power on your phone by pressing and hold camera button and reset, then follow the instructions.
If you are going to WM6.5, flash first an original 6.1 ROM from your provider or HTC to cleanup the storage, and after the flash, hard reset your device.
Happy Flashing !!!
Good Luck
yes that is a good sugestion..flash from SD card and place flash file to be on the root of you SD disk..i don't use PC for anywhere to flash Kaiser because can download from WiFi that files birect to SD card.Good luck!
MY device go still at Color screen when i press three buttons
and only the word appears is ( serial)
nothing go forward
what should i do know
zeeshan9211 said:
MY device go still at Color screen when i press three buttons
and only the word appears is ( serial)
nothing go forward
what should i do know
Click to expand...
Click to collapse
Read the stickies!!!!!!! Then follow the flashing for noobs bit. It explains it all in perfect detail in there. Force it into usb mode or if that doesnt work, flash via sd.
Dear Senior members
whenever i wants to upgrade Rom wm6.1 to wm6.5 it stucks on 0%
and if i use storage card method it stucks at loading ...
plz guide me better what should i do whether i change hard spl to 3.56
and radio rom to 1.71.09.01
and then should try or what to do??????
zeeshan9211 said:
whenever i wants to upgrade Rom wm6.1 to wm6.5 it stucks on 0%
and if i use storage card method it stucks at loading ...
plz guide me better what should i do whether i change hard spl to 3.56
and radio rom to 1.71.09.01
and then should try or what to do??????
Click to expand...
Click to collapse
Which 6.1 rom are you using to upgrade from?
Send Me Help Back
original HTC wm 6.1 wwe
rom version 3.31.415.1
radio 1.70.18.02
protocol 25.83.40.02H
What other HardSPL versions have you tried? Does it say USB on the screen when you are on the tri colour screen after changing HardSPL?
I've had problems doing it the sd card way in the past so I always use USB now and it's not failed once. Just try different hardSpl versions, that seems to be where you troubles lie.
Stuntdouble is right, remember when you search and flash different roms the cookers always post in their threads recommended hardspl and radio so you won't have any problems running their roms.
Also, please follow in detail every step in the flashing for noobs thread for hardspl flashing
Having that, I think nobody should have any problems since you only need to follow intructions in detail.
Have you un-locked the Kaiser?
I got the same problem when I got my TYTN II back from repair, I had to un-lockit again.
http://forum.xda-developers.com/showthread.php?t=375583
//T
Hi!
I am facing problem with my Orange SPV M5000. The device hangs up. I have to reset the device and after the Windows splsh screen a blank page appears and the device hangs. I have to take the battery and the Sim from the phone and then without putting in the Sim restarts the phone. It, then, behaves normally and boots properly. Then I put the Sim again and restarts the device and then it boots normally.
I have flashed the device with a number of cooked ROMs and the result is the same. I have noticed that normally this happens whenever I put my device in the pocket of my trouser and on certain other occassions as well. Have already get my device checked for any loose connections. Everything seems in order.
I would appreciate if I am guided on this.
Regards,
Haque
Orange SPV M5000
128 MB RAM
16GB Storage Card
have you done a doc-format as well between installing a new ROM?
-Jonny- said:
have you done a doc-format as well between installing a new ROM?
Click to expand...
Click to collapse
Hi!
Yes, have Doc Formatted the device as well between flashing, but the results are the same.
Regards,
Haque
try
Try following method:
1. Doc Format
2. Flash WM5 (one with SDHC support)
3. Make HR while on WM5
4. Re-flash cooked ROM (I'll suggest Goldrake WM6.1 )
mesaj said:
Try following method:
1. Doc Format
2. Flash WM5 (one with SDHC support)
3. Make HR while on WM5
4. Re-flash cooked ROM (I'll suggest Goldrake WM6.1 )
Click to expand...
Click to collapse
HI!
Thanks, I have already done this, but the device hangs. Can you suggest anything else.
Regards,
Haque
Where R the Experts ....... Help Needed Please!
mesaj said:
Try following method:
1. Doc Format
2. Flash WM5 (one with SDHC support)
3. Make HR while on WM5
4. Re-flash cooked ROM (I'll suggest Goldrake WM6.1 )
Click to expand...
Click to collapse
Haque said:
HI!
Thanks, I have already done this, but the device hangs. Can you suggest anything else.
Regards,
Haque
Click to expand...
Click to collapse
Hey Guys!
Where are the experts? I am desperately needing help. My device is mal-functioning. I have tried everything I thought of. Please, Please, Please somebody help me out.
Regards,
Haque
I do not consider myself an "expert", but have you tried replacing the battery?
Just trying to eliminate possible causes.
orb3000 said:
I do not consider myself an "expert", but have you tried replacing the battery?
Just trying to eliminate possible causes.
Click to expand...
Click to collapse
Hi! Orb! Thanks for the tip. Haven't tried as yet but I will do this. A brief of the issue for more clarity:
I have got my device's RAM upgraded and it worked perfectly alright with flashing and testing of one version or another. No issue at all at that time.
The problem started from the time, I first DOC formatted and flashed the ROM by Tomal. The command I used was TASK 32 and the TASK 28 55aa as stated in the instructions using MTTY 1.42. Since then, I was not even able to run WM5 (but the other cooked versions worked fine). Have tried skiping the screen calibaration process using some utility and found that WM5 worked good but once a soft reset is done or the device is switched off, the screen does not appear. Once flashed with WM5, after the device logo screen, either a white or a colored screen appears or after the windows splash screen preventing the OS to boot up and the processes after that. While installing any other ROM, the device worked 100% okay.
Afterwards, I noticed that the device started to hang up even using any ROM despite a number of soft/ hard resets. Have also noticed that the device started malfunctioning and does not boot when the SIM is inserted. After trying for a few times the device starts working with the SIM. Once the device is restarted even with full 100% battery the blank screen appears and the device does not go beyond this. Taking the battery off for a couple of minutes will help the device to boot properly but after a number of tries.
Have Doc formatted the device a number of times, hard resetted but to no use. Installed almost every cooked version the result is the same. Even got the device checked by the mobile repair shop and it was said that the device is okay hardware-wise and if it is mis-behaving it is because of the software.
Guys I need help to save my device.
Regards,
Haque
Well,,I'm not an expert too.. But from your story it looks like something is wrong, either with your device (some intermittent problem with SIM card circuit inside) or the SIM card it self. Why not you try to change the SIM card first? To make sure that there are no problems with your device, bring it to HTC authorized service center..
Shadow_Nexus said:
Well,,I'm not an expert too.. But from your story it looks like something is wrong, either with your device (some intermittent problem with SIM card circuit inside) or the SIM card it self. Why not you try to change the SIM card first? To make sure that there are no problems with your device, bring it to HTC authorized service center..
Click to expand...
Click to collapse
Hi! Thanks for the advise. I'll take my mobile and get it rechecked at the repair center. As regard the SIM card, I have already checked it and there's no problem with it.
Regards,
Haque
Hi guys, i have the palm treo 750 with the wm 6.5 and o need to go back to the original wm 5.0. I've tried everything but no results. i put the rom in my sd card in did the hard-reset, but didn't loading at all, i tried many differents roms, but none of them worked. It shows that tri colour screen with these informations: Palm Tr ( IPL- 0.20)
Palm tr (SPL- 0.24.0000
Another thing my treo doesn't connect with pc, so i have to to do everything with sd card.
I'm using windows 7 64bits.
Please help me i need to downgrade
Thanks
You can't flash a ROM from an SD card without doing a successful HardSPL first. By virtue of your post (SPL- 0.24.0000) you haven't done it correctly yet.
I don't know if there is a way to HardSPL the phone from an SD card. Search this forum to see if anyone has reported doing it.
PS ... don't go back to WM5. There are many official and stable versions of WM6.0 which is much better than WM5.
Thx, but i still not having any result, if anybody else can help, pls, i'm trying everything.
Well, obviously you aren't trying everything ... like doing simple research.
A quick Google search turned up that Palm doesn't have (or plan to put out) a 64bit USB driver for the Treo 750. That would explain why you can't connect it to your PC.
This thread on the subject is pretty old, but then again, so is the phone ...
http://forums.palm.com/palm/board/crawl_message?board.id=activesync&message.id=2978
So, you might want to find a PC with a 32bit OS on it and try getting your Treo to sync to it instead. If that works, then installing a factory ROM will be fairly easy. Keep in mind, you might have to edit the payload.xml file because the installer will see a more recent version of the ROM already on your phone (assuming you really have WM6.5 on it now).
http://forum.xda-developers.com/showthread.php?t=345531
There are plenty of official WM6.0 ROMs available. That would be your best option. You can find many of them here:
http://rapidshare.com/users/PJNMEM/?byfilename=1&password=&subpassword=
Problem solved, just install a program that made my mobile come back to the wm 5.0.
Thanks all
You might want to share your solution with the board in case others have the same issue and need help.