Related
Friends,
I read through the faqs, instructions, and did my research. Still, there are a few questions.
I have been successful in upgrading to Gullum's diamond rom which is awesome btw. Now, I am on the prowl checking out other roms from the other authors.
Each time I perform the hardspl which successfully goes through w/no glitches . At the bootloaded screen (tri-color) it shows KAIS1*0 MFG SPL-1.0.OliPOF.
Shouldn't it read HARDSPL Version 3.? after the spl update?
Basically, in a nutshell this is what I did:
1. CID unlock program "kaiser- CID Unlocked
SPL01.0 OLIPOF
2. HardSPL Version (per authors instruction)
3. ROM Upgrade.
Please advise for the advance instruction,
Tvos
Did you jumpSPL before you upgrade to HardSpl 3.xx?
If not, search for JumpSPL!
Also, you dont need to CID unlock everytime. just once is enough.
I agree, it must be the jumpSPL. Jocky's thread is stick in the ROM development.
ditto this happened to me and jumpspl was the answer
no, i didn't use jumpspl before hardspl..
I actually used hardspl 3.56 with Laurentius26 and everything works beautiful!
w/o jumpspl..
All the steps are pretty basic, but question on the following:
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
** When I copy the .exe to my device, is it to the storage card? Previous step states to remove sim,sd card, and battery.
** If I install JumpSPL1.56 successfully, I don't need to install 1.93 correct?
6. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
7. After I run KaiserCustomRUU.exe, then I should be able to run
HardSPL v3.07, v3.28, v3.29 and v3.56 - per authors instruction.
8. Reload the authors ROM.
Is this correct?
please advise and thank you!
tvos
You copy the JumpSPL onto your device memory!(becuase you have already removed your SD card)
When you install JumpSPL 1.56 without anyproblems then you dnt need 1.93, correct.
Then run HARDSPL 3.xx...
Flash your rom.
tried JumpSPL1.93-KAIS.exe, then SDA application lock still nothing..
okay - did all that and KAIS1*0 MFG SPL-1.0.OliPOF still shows.
any ideas?
tvos
tvos said:
tried JumpSPL1.93-KAIS.exe, then SDA application lock still nothing..
okay - did all that and KAIS1*0 MFG SPL-1.0.OliPOF still shows.
any ideas?
tvos
Click to expand...
Click to collapse
let me ask .. when you first tried to hardspl did you run into whitescreen? if so you probably need to use the same version of jumpspl 1.56 or 1.93 that you used to get past whitescreen. Secondly once you have copied the jumpspl file to your device you have to run it from there.
Hope this helps.
p.s. glad to see you got the rom flashed .. sorry couldn't respond sooner
Hello...
I own the AT&T Tilt and first used app to unlock the device,sid, cid etc.
HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)
Everything ran fine when updating the rom.
After that, I then ran hardspl thinking that it updated the spl but didn't. After that, moved on to Gullums, Laurentias, and Dutty's rom (testing each one). No problems flashing, however it's not the correct hardspl installed.
So I decided to post and see what could be done to get the correct hardspl on there.. I have tried everything with jumpspl (both versions) and didn't take. I tried this about 4-5 times - nada.
I noticed that HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) stated for Kaiser, but I own the tilt. Does that matter?
ANy ideas would be appreciative.
Tvos
tvos said:
Hello...
v1 - CID Unlock & Flash any ROM to your device (4 free) stated for Kaiser, but I own the tilt. Does that matter?
ANy ideas would be appreciative.
Tvos
Click to expand...
Click to collapse
no it doesn't as they are the samething except the tilt lacks the front camera. i don't know why u are having problems. using jumpspl i have switched between all of these newer spls provided by jockyw... hmm
tvos said:
no, i didn't use jumpspl before hardspl..
I actually used hardspl 3.56 with Laurentius26 and everything works beautiful!
w/o jumpspl..
All the steps are pretty basic, but question on the following:
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
** When I copy the .exe to my device, is it to the storage card? Previous step states to remove sim,sd card, and battery.
** If I install JumpSPL1.56 successfully, I don't need to install 1.93 correct?
6. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
7. After I run KaiserCustomRUU.exe, then I should be able to run
HardSPL v3.07, v3.28, v3.29 and v3.56 - per authors instruction.
8. Reload the authors ROM.
Is this correct?
please advise and thank you!
tvos
Click to expand...
Click to collapse
OK. First off, if your bootloader shows you as having an SPL or **Olipof then you have a HardSPL installed. You can then flash to your hearts content. Second, you don't need to flash HardSPL ever again, unless uprading the HardSPL that is. All you need to do is download the ROM and then flash it.
JumpSPL is only used when uprading SPL number that is all. If you install a HardSPL and bootloader says **Olipof or whatever then HardSPL is installed. After this only update the ROM by downloading a new one and flashing........
Hmm,
if it's any consulation, so far I like Laurentius rom...
I will keep trying - just to refresh the steps.
1. remove battery, sim, storage card,
2. insert battery, usb
3. install JumpSPL1.56-KAIS.exe
4. remove usb, re-insert and then run flash hardspl
5. install hardspl version 3.x
correct?
tvos
The steps you have mentioned are correct FOR UPDATING THE SPL VERSION. you dont need to go through this every time. Once HardSPL is installed it stays installed, even after a ROM flash........
If you use the original HardSPL, bootloader shows SPL as 1.0Olipof or something. If you install a newer HardSPL it shows as SPL: 3.28, 3.29 etc Hard.
If you are unsure, go into bootloader and see what SPL version your phone is at. If it shows 1.0 Olipof, 3.28 Hard, 3.29 Hard or [anything else] Hard then you have a HardSPL installed and can flash ANY rom you like. Only one exception to this. DO NOT flash an HTC ROM after HardSPL or you MAY need to re-flash HardSPL before changing it to a cooked one at a later date.
I thought after running "HTC Hard SPL V1 CID Unlock - POF" I then needed to run HardSPL 3.xx.xx . After that, I could upgrade to what ever rom I choose?
If so, I guess that I'm done...
tvos
tvos said:
I thought after running "HTC Hard SPL V1 CID Unlock - POF" I then needed to run HardSPL 3.xx.xx . After that, I could upgrade to what ever rom I choose?
If so, I guess that I'm done...
tvos
Click to expand...
Click to collapse
If you run V1 CID Unlock - POF, check the bootloader for the SPL version. If it says 1.0 Olipof, i think it is anyway. If Olipof is showing in the SPL field of the bootloader then you have version 1 of the HardSPL installed and can flash any ROM. The updated HardSPL's ie 3.28, 3.29 etc are only to try to help with a few minor bugs that some ROM's have. I currently have 3.29 installed on my Kaiser and the Diamond ROM installed and all works like a charm. Any bother give me a shout.
going offline to get some food. Back on later. Good luck. If your bootloader shows Olipof, get a ROM flashed for god sake........lol
DO NOT flash an HTC ROM after HardSPL or you MAY need to re-flash HardSPL before changing it to a cooked one at a later date.[/QUOTE said:
are you talking about a HTC rom released from the HTC for a release update?
right now, i have been using Laurentias rom and I like it a lot! only thing I hate is when the backlight goes dim.. I know there is a hack for that..
I'd like to find a rom that is bare bones, at&t, outlook, office, bluetooth, gps all included then I can start working my way in building it.
I think someone said Rotohammer's rom was built this way?
THank You for all the help!!!
Tvos
Click to expand...
Click to collapse
OK, I am not sure if this is your problem after this long of a thread...
It looks like you are trying to jumpspl 1.56 over hardspl. Instead, run sspl-kais.exe on your tilt after you have removed your cards. Then on your computer, run the customruu with the desired hardspl version.
in kyphurs words:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
You may have tried this, but it might be that you are just using the wrong jump spl. I have not used the 1.56 version since I don't need it but I think it is for people that can't hard spl. Hope this helps.
thanx dude.. I did all that already, no luck...
I have 1.0 Olipof which is fine. I was able to flash different roms w/no problems and as stated above, I am set ready to go rom upgrading..
so far I really like: L26_Kaiser_DIAMONDV9 rom which works beautifully!
a few little quirks here and there, but these can be tweaked..
thank you all!
tvos
ok, I guess I just don't understand why your phone won't flash the .nbh file to change your hardspl. If 1.0 is working, then who cares, right?
The screen remains black, blank, and does not light up, even though activesync knows the device has booted because the icon becomes green. I can't navigate any controls, though the keys do light up when I slide it, or press buttons. Screen remains blank/black.
Here is what I did to get to this state:
1) I first hard reset my Kaiser, to reset all user preferences. This I accouplished by pressing both soft keys while pressing power (if I recall correctly), then hitting the green call button. It then installed Windows Mobile fresh.
2) I then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
3) I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way.
What should I do? Did I miss something? Is this recoverable?
It also does not have any sound. Does this mean I can't unlock?
How do I flash back to the original rom?
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
NetTechie said:
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
Click to expand...
Click to collapse
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
I have a problem... it wont go green now, I can't get activesync to go green. I wont be able to load the rom... what can I do?
[ EDIT ]
A reboot fixed this *sigh of releif*. Goes green now.
AllTheWay said:
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
Click to expand...
Click to collapse
Ok, question: Will I use the file in Step 3 to put that on the phone? It is saying there is a file open...? I can't disable USB on the device, as the screen is blank.
[EDIT] Looks like everything I needed was in the download. I put the other ROM back on. However, I'm having a problem with activesync... When I click on Connection Settings active sync freezes up. Any ideas what to do to fix ActiveSync so I can turn off USB, without crashing ActiveSync?
Okay, I got the screen with the unlock code... only it gave me this readout:
Your Unlockcode = ........
just like that, with dots.
Is there any way to unlock a phone, if the screen goes black? I can go back to the old firmware, but this special firmware is needed I think to do the unlock, and this special firmware makes the screen go black on my model.
EDIT: On page 33 of the Kaiser unlocker topic, I found what looks like my answer. I need the AT&T 1.57 ROM, as it is compatible with this patched radio so the display will work. Unfortunately, I haven't been able to find it on this forum yet. EDIT 2: Found it, loading it on now: http://www.4shared.com/file/3857459...ULAR_WWE_157_-_Originaly_Shipped_ATT_ROM.html
Unlock worked, once I had the AT&T 1.57 version of the ROM on there. ActiveSync still freezes, but I uninstalled it for the section where I was supposed to disable USB. Installed the 1.27.12.11 radio after completing the unlock, replacing the patched radio. All finished.
Mine still showsup Blank screen
Hi,
I followed the same steps as yours :
Firstly I reset my Kaiser & then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way
Now I tried flashing
http://www.4shared.com/file/36681926...CustomRUU.html
But it didnot help (
Can you please tell me what I should be doing next..
vrramakanth said:
But it didnot help (
Can you please tell me what I should be doing next..
Click to expand...
Click to collapse
what do you mean when you say it "didn't help"?
I still get the blank screen..I am now downloading the AT&T 1.57 version .. I am hoping if I install this I will get the display and I can proceed to step 8a, 8b,..
Sorry to be short,
But did you even bother reading through the other threads with the exact same problem as you?
the problem you have is that you flashed an incompatible radio with the ROM that you are runing on the phone. You need to reflash the ROM with a rom that is compatible with the radio or reflash the radio rom to what came with the phone rom that you are running.
You should have upgraded to a 6.1 cooked rom prior to doing the SIM/CID unlock.
Flash your phone with a cooked 6.1 rom that INCLUDES the radio, and then try the CID/SIM unlocker.
my two bit.
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html, which is the ROM that comes with this phone. Do u think this helps? Do u want me to flash 6.1 ROM instead of this?
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
vrramakanth said:
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
Click to expand...
Click to collapse
It's not a wrong question
1. Yes, that fits in
2. No, you do not need to upgrade to 6.1 before this, flashing the ROM will take care of it
hope this helps
Thanks mbarvian!!
So I am Installing the upgrade to 6.1 ROM, but do I still need to install the correct AT&T ROM that you gave me in the other thread http://forum.xda-developers.com/showthread.php?p=2452022#post2452022?
Thanks!!
Alibaba0101 said:
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
Click to expand...
Click to collapse
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
vrramakanth said:
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Click to expand...
Click to collapse
Yes, now you would want to download and flash the ROM I gave you in the other thread
here's the link:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html is this fine??
There are now a large selection of Kaiser Hard SPL's floating about. I am making this thread as a collection for all of them and the instructions for flashing them.
Explanation
WM Version - Different SPL's perform better depending if you are running WM6.0 or WM6.1. If you are using a WM6.0 ROM, you should be using a WM6.0 Hard SPL (v1 is recommended). If you are using WM6.1 any 3.* SPL is recommended.
Hard SPL Version - Most WM6.1 ROM's are based of a 3.* release by HTC / ATT. The 3.* Hard SPL version should match this the best it can.
MFG - Manufacturing. This SPL supports more commands (such as rtask a)
jockyw2001 - Any Hard SPL made by jockyw2001 (WM6.1 versions)
cmonex - Any Hard SPL made by cmonex.
DaveShaw - Any bootloader patched by me. Will be the same as cmonex's because I copied her changes from previous versions - all credit to her .
Force USB - These SPL's have a fix to force the USB to work if it is not working for some reason.
nostuckinSPL - These SPL's have a fix to prevent you getting stuck at the bootloader as often.
Versions
Windows Mobile 6
-Hard SPL V1 (1.00.OliPof) [MFG] by pof / Olipro - Download and Instructions in the linked thread.
-Hard SPL V1.1 (1.1.JockyW) [MFG] by jockyw2001 - Download and Instructions in the linked thread.
-Hard SPL V1 nostuckinSPL Force USB [MFG] by cmonex - download only.
Windows Mobile 6.1 - All links are to the downloads, instructions to follow.
jockyw2001 (.hard)
3.07 Hard SPL / Force USB
3.28 Hard SPL / Force USB
3.29 Hard SPL / Force USB
3.56 Hard SPL / Force USB
cmonex (.hard2)
3.29 Hard SPL nostuckinSPL / Force USB
3.31 Hard SPL nostuckinSPL Force USB
3.56 Hard SPL nostuckinSPL / Force USB
DaveShaw (.hard)
3.34 Hard SPL nostuckinSPL Force USB
Instructions
If this is your first time flashing an SPL, take some time to read up on the other stickies (mskip's in particular) and wiki pages, this is more of a reference thread.
How to Install A Hard SPL:
Plug the device into your PC
Copy JumpSPL (either 1.56, 1.93 or 1.94) to your device.
Take out your SD card & SIM Card.
Run Jump SPL on your device
Wait for the bootloader screen to appear and "USB" to show.
Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
Download the attached files from the first instructions
Pull out the battery and reinsert it (this step *is* important)
Connect your PC to phone with a USB cable
REMOVE SIM and SD CARDS !!
Copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe and if you still get a white screen then reset your device and now try JumpSPL1.94-KAIS.exe
After a few seconds "USB" appears on the phone display
Unplug and replug the usb cable
Deselect "Allow USB connections" in Activesync connection settings
Now flash hardSPL (run KaiserCustomRUU.exe on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
Upgrading SPL via SD Guide - Only works if you already have Hard SPL.
Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
Download the SPL you want to flash from the links above.
Rename the NBH file you downloaded to KAISIMG.nbh.
Download KAISDIAG.nbh from here.
Insert the microSD Card into the phone
Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
It should say Loading / Update in progress and then to a screen saying SPL 1.00.OliNex
It should now say Press Power Button to flash or just flash the KAISIMG.NBH and then reset
At this point it should boot to the OS, if it doesn't then flash an OS (delete the previous KAISDIAG.NBH and KAISIMG.NBH from the SD Card and use Flashing Rom from MicroSD Card method)
After the Operating System loads, DELETE the KAISDIAG.NBH and KAISIMG.NBH files
FOR ANYONE WITH QUESTIONS ABOUT WHAT THIS IS FOR, WHY YOU WOULD NEED IT, OR HOW TO PERFORM SPL PROCEDURES: Read This Wiki page
FAQ (Not 100% applicable to this but a good source).
Thanks (in order of appearance)
pof
Olipro
jockyw2001
cmonex
Kyphur
mskip
I'm off home now I might not be back on for a while.
Post any problems here and I'll update / clean up this thread when I get home.
Ta
Dave
Very nice! Thanks for putting it all in 1 place!
Removed. I flashed 3-4 times and it finally took. Thank you for your help. Anyone else have a preference on a HARD SPL?
Hyden121 said:
Removed. I flashed 3-4 times and it finally took. Thank you for your help. Anyone else have a preference on a HARD SPL?
Click to expand...
Click to collapse
Was just about to reply. Glad you sorted it. I've had problems changing SPL before. The second set of instructions using Jump SPL worked. Also cmonex's KAISDIAG.nbh method works everytime.
I'm using 3.34 Hard SPL for 2 reasons.
1. The ROM I'm using is is based on the 3.34 ROM.
2. I made it (with cmonex's help ).
Dave
I saw that. I am using it as well but was curious if the 3.56 SPL was better in anyway. Either way it is great to finally have a new SPL and it only took me 1 year.
thanks dave! i've flased it and all seems well. my keyboards only have 2 keys you have to press a bit more firmly than the rest rather than 9 with 3.29 so that's much better!
had trouble flashing via customruu so did the microsd card thing. kinda weird though, last night, i couldn't get the microsd approach going with 3.29cmonex. so i flashed via customruu and it worked. now with 3.34, i couldn't get the customruu to work, so i did the microsd approach. anyway, so long as it works!
Thanks DaveShaw, you've really helped new-to-Tytn2 people like me a lot. A good beginning to the ROM experiencing journey
3.34 hardSPL tested ok for my kaiser,thanks to Daveshaw.
nice post, can anyone post his/her experience with the SPLs, meaning if better speed, battery life,....etc
thx dude
Could you explain what is the major advantage of using your 3.34 HardSPL toward to the other Hard SPLs?
I still have no idea about those HardSPLs differences so I'm using latest(? 3.54).
Thank you.
kurobosi said:
Could you explain what is the major advantage of using your 3.34 HardSPL toward to the other Hard SPLs?
I still have no idea about those HardSPLs differences so I'm using latest(? 3.54).
Thank you.
Click to expand...
Click to collapse
All Kaiser ROMs (Cooked or not) are based on a Official release (some cooked roms are based on more than one). Here's a list of the official releases: Kaiser ROMs.
You'll notice the version numbers are all 3.* for the WM6.1 ROM's. People have noticed if you are using the SPL version that matches your ROM version you get less screen freezes.
Sometimes you can't match them perfectly, so a little trial and error can help you find the best match.
Hope this helps.
Dave
DaveShaw said:
All Kaiser ROMs (Cooked or not) are based on a Official release (some cooked roms are based on more than one). Here's a list of the official releases: Kaiser ROMs.
You'll notice the version numbers are all 3.* for the WM6.1 ROM's. People have noticed if you are using the SPL version that matches your ROM version you get less screen freezes.
Sometimes you can't match them perfectly, so a little trial and error can help you find the best match.
Hope this helps.
Dave
Click to expand...
Click to collapse
great work dave but i have to ask something...
is there such a thing as the ultimate spl? meaning it's a bit troublesome to keep changing spl's based on the original builds of our cooked roms...since they keep coming from different sources...
from ur experience, which spl is the stablest with the newer cooked roms..
i've been using cmonex's 3.29 since it came out and to me it seems compatible with any rom i throw at it...
is ur 3.34 the new 3.29 hard2?
mazin13 said:
great work dave but i have to ask something...
is there such a thing as the ultimate spl? meaning it's a bit troublesome to keep changing spl's based on the original builds of our cooked roms...since they keep coming from different sources...
from ur experience, which spl is the stablest with the newer cooked roms..
i've been using cmonex's 3.29 since it came out and to me it seems compatible with any rom i throw at it...
is ur 3.34 the new 3.29 hard2?
Click to expand...
Click to collapse
No idea. I've been using it for a while now but I don't flash cooked ROMs much at the moment
Try it for a bit and it you like it keep it
Only cmonex knows what's going on inside the SPLs.
Ta
Daev
Great work dave, seems you are quite good in organising things, Was missing such a nice piece of thread & must have started had I been so much in to it. Thanks again. Good luck.
DaveShaw said:
There are now a large selection of Kaiser Hard SPL's floating about. I am making this thread as a collection for all of them and the instructions for flashing them.
MOD EDIT Snip...
Click to expand...
Click to collapse
Hi! I have weird problem with HTC Kaiser (or HTC TyTn II).
At the boot of Windows Mobile 6.1 i got the message "the device is clearing storage..." and then the device shutdown, the right led is stuck in blue and when I try to Upgrading SPL via SD my phone stuck at white screen and said loading...
I'm confused so I write this problem here. everything I do fails including mtty process. what can i do, help me please.
Thanks for advice.
Greetings!
neilus said:
Hi! I have weird problem with HTC Kaiser (or HTC TyTn II).
At the boot of Windows Mobile 6.1 i got the message "the device is clearing storage..." and then the device shutdown, the right led is stuck in blue and when I try to Upgrading SPL via SD my phone stuck at white screen and said loading...
I'm confused so I write this problem here. everything I do fails including mtty process. what can i do, help me please.
Thanks for advice.
Greetings!
Click to expand...
Click to collapse
Sound's like the ROM is at fault rather than SPL.
Try a hard reset, if that doesn't work, try flashing a new ROM via the bootloader.
Thanks
Dave
DaveShaw said:
Sound's like the ROM is at fault rather than SPL.
Try a hard reset, if that doesn't work, try flashing a new ROM via the bootloader.
Thanks
Dave
Click to expand...
Click to collapse
Hi Dave, thanks to reply, as I said I think I try everything and everything I do fails including mtty process, I try flashing a new AT&T ROM via usb cable at the BootLoader screen and the process completed 100% and when restart of Windows Mobile 6.1, I got the message "the device is clearing storage..." and then the device make a strange "sound" and shutdown, I was Tried a hard reset, doesn't work, I tried flashing a hardspl via the bootloader but unsuccessful, when I try to Upgrading SPL via SD my phone stuck at white screen and said loading.... when I try to Upgrading SPL via SD with the same SD to another phone its work.
Thanks.
@neilus,
Since Dave mentioned ROM issue, I suggest you re-download again the ROM (just to make sure you got it clean and good) and re-flash. What was your O/S or ROM before flashing? The SPL is important to match the ROM version .. if you're from 6.0, then you need to flash a ROM that comes complete with SPL (such as OEM upgrade ROM)
Otherwise, go back to starting point and read through the newbies guide and this (especially for your stuck on white screen)
anagarika said:
@neilus,
Since Dave mentioned ROM issue, I suggest you re-download again the ROM (just to make sure you got it clean and good) and re-flash. What was your O/S or ROM before flashing? The SPL is important to match the ROM version .. if you're from 6.0, then you need to flash a ROM that comes complete with SPL (such as OEM upgrade ROM)
Otherwise, go back to starting point and read through the newbies guide and this (especially for your stuck on white screen)
Click to expand...
Click to collapse
Hi anagarika, look this:
model : KAIS1*0
SPL-1.93.0000
CPLD-8
I was flashing a new ROM via the bootloader, original AT&T rom, everything work fine at the flashing process and finish 100%, when the unit charge and swich on going to first windows logo screen and with sound switch itself off (the sound is named "LB" I think).
Thanks a lot.
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !
Hello, i've got problem with my GPS so i would like to reflash radio. The file i found in "athena upgrading" section doesn't work. It says to me wrong version. Is there a spécific file for X7510?
Thank you very much.
x7510 Radio Download here
Thank you very much Vico!
When i flash radio does it hard reset my system? I mean erase my file?
In your wonderfull rom is radio included?
Thank you.
wernervw said:
When i flash radio does it hard reset my system? I mean erase my file?
Click to expand...
Click to collapse
I really doubt that it does a hard rest. Since its only radio flash, but I haven't tried.
wernervw said:
In your wonderfull rom is radio included?
Click to expand...
Click to collapse
Thnxs for the complement , no its not included in my rom's. The reason is, that theres no points in reflashing radio rom, unless you have a problem, since the OS update does not affect radio.
Need X7510 radio 1.58
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.
CARDOLFO said:
Hi Vico, Happy new year, I have problems with my X7510 radio, actually I don´t know how happened but the radio dissappeared and I want to reflash it, I found the link You had with the radio rom but it said that the file is no longer available, Could you give me another link with the radio room?.
Thank you in advance.
Click to expand...
Click to collapse
Here, Athena radio 1.58 for you
x7510 Radio
Thank you very much, Hakim but I had an id error when I tried to flash the radio you posted me.
Vico thank you too for the quick reply but I had an 262 error when I tried to flash the radio you posted, I had the Hspl 365, do you think that I have to change to the stock one?
Thank you Vico and Hakim
Greetings from Mexico¡¡¡
Do not change spl to stock. Make sure that your device is x7510 NOT x7500 ect.
Make sure you don't have a sd card, and make sure you are in bootloader mode (camera + reset).
Hi Vico, the model is X7510 and I took out the sd card and tried to flash the radio again, It started well but at the 7% it stopped and now appeared a model ID error [244].
Thank you for your help.
Download my one again, and put your device in bootloader mode, make sure you you only have the two files in a folder. i really don't know what else to do, try another computer maybe?, there is also a way of flash a rom by putting it storage. just try Google
hi vico i just flahs your rom WM6.5.3-23153_128DPI_x7510_6.2_VICO, but have not signal on my divice X7510 , i found this tread and relise that ur roms donst have the radio, iam trying to install this radio Athena 1.58 but have a error massage , . i also try to install the X7510 radio without succes, see the pic atach.
thanx for ur help-
Redownad this new radio (might help) if that dosn't work, i have incledud the original 6.1 htc rom. Just make sure you have Hard-spl "3.05-OliNex", make sure you are in bootloader when you flash.
NEW radio x7510 1.58
Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship
Also make sure you use 7-zip for extracting, just so there are no errors.
thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.
vrgolin said:
thanks for ur answer ,yes i have the bootloader when i flashing and i have Hard-spl "3.05-OliNex" y tryed to install the new radio but dosent let me , it just send me an error update, i will try to install de stock rom 6.1
i wiil let you know what happens, thanks mate.
Click to expand...
Click to collapse
i give up, i think i have try almost evrething but no succes flashing te new radio, i dont know what the problem was, and the Original RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship also didnt let me flash it, always got just 10 % of the instalation and it stuck, after that i got the update error all the time,
thanks for ur help vico, i areciate.
try flashing rom from on board flash.
Vico100 said:
try flashing rom from on board flash.
Click to expand...
Click to collapse
what do you mean with flashing the rom from on board flash? .
what i did. i rename the RUU_signed.nbh to ATHEIMG.nbh i copy to the mini SD an then try to flash the rom in that way from the mini SD, i put the divice in boot loader and right now the screen said .... Loading.... but thats it,. i still dont see any progres.
According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)
Vico100 said:
According to the manual:
III.Select file system and format the MiniSD card to FAT32 mode.
IV.Copy image file XXX.nbh to the micro SD card and rename to ATHEIMG.NBH.
V.Turn the device power off and insert MiniSD card.
VI.Press and hold Power + Camera button, and Reset button to entry Boot loader mode.
VII.Press Power button to start upgrade procedure.
VIII.Reading source code from MiniSD card.
[Note]: This process will takes 15 mins, please don’t power off the device.
IX.After finish, press Reset button to reboot.
So probably make sure its the only file on the sd (and do it exact capital letters ect)
Click to expand...
Click to collapse
well let me tell u tahat i have 2 divices X7510 the first one:
ROM ver. 3.29.xTep_3_00 wwe
ROM date 01/25/09
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2. 02
ATHE400
spl-3.05.0000
on this divice dosent let me instal a radio , after 7 % it fail, and when i want to to flash the stock rom from my computer , after 10 % it fail, and i flashed from the SD following the steps u metion here , but nothing hapens after the 3 color bootscreen .
the second divice X7510 :
ROM: WM6.5.3-23153_128DPI_x7510_6.2_VICO
Radio ver. n/a ... the divice dosent have radio/ dosent let me install after 7%
IPL-v2.02
ATHE400
SPL-v3.65. OilNex
i have the same problem on both divice
Hi Vico, thank you again for your support, I downloaded the second file that you upload "X7510 1.58 radio" and I uncompressed it with 7 zip and now I could flash the radio with out problems.
Thanks again for your help and patience¡¡¡
If you need something from Mexico just say it...