Database Info

64k simcard problems! WAS: Danish ROM for S710?

I've been flashing around with english roms to see if it changed the bloody problem with the phone going into a reboot loop if a SD card is inserted.
This didn't fix it, and now there's apparantly no danish rom available from Telia, and since this isn't a Dangaard branded phone I dont have access to the ROMS on www.qtek.dk :-(
If anyone has a nordic rom of sorts, please save me from binning the phone
Edited the title to make more sense now

If ur phone only reboots with sd card inserted it means something on the sd card is causing it. Format your sd card on a PC and try again.

That's obviously the first thing that came to my mind aswell. I've tried formatting it, I've tried using a different card, etc. No use. Ends up in the reboot loop with a card inserted, boots fine without it. I can then insert the card after the device has booted without problems, but next time WM6 hangs or whatever, same problem.

Have u tried resetting the device by pressing left and right softkey simultaneously and then power on? Alternatively try the clear memory program in the experts folder.

Tried hardresseting it and using the clear memory program yes

Well then it can only be a hw defect. Get it serviced.

I've read others have this problem aswell on some of their phones. I can't really turn it in for service with a non-nordic rom anyway, so if noone has a nordic ROM they can share I'll prolly end up whacking it with a hammer...

Is your device CID unlocked and can you flash any ROM?
Have you tried flashing the Dopod 1.19 ROM?
What exact ROM version was on it (version#)? Did you then down- or upgrade it and to which version? Did you make a backup of the ROM using pdocread as described in the wiki?
I would leave the hammer in ur toolbox for now. I'm pretty sure the thing can be rescued if it is indeed caused by a bad flash.

The problem wasn't caused by a bad flash, I bought it secondhand only about 2 months old, and it's had it straight out of the box. Obviously the seller didn't know anything about it having this quirk...
I tried flashing it with the 1.19 dopod ROM (Had 1.14 nordic ROM initially), still same problem. I did a backup with pdocread, but can't make pdocwrite work, complains it can't write to the filesystem.

Since your device is obviously CID unlocked, it looks feasible to create a flashable file from your pdocread backup. Take a look at my bootloader thread, there is a link to another thread where that is covered.
I personally believe the previous owner CID unlocked your device and maybe it didn't completely work in the way it should. Please make a backup using "bkondisk" and post the IPL (128kB) and the SPL (512kB). I can check these files, perhaps the hw is not properly set up by any of these.

Isn't the IPL and SPL replaced in the standard RUU flashes?

Normally yes, but in ur case maybe it is skipped.
Why don't u dump it so we can check it.
Radio is also interesting.

Have DK ROM - will give
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe

would be nice if you upload it to XDA developers FTP site

mHumle said:
Drop me a mail. Then we an figure out how to get it to you.
This is the file.
ruu_vox_htc_noric_1.15.402.4_4.1.13.37_02.83.90_ship.exe
Click to expand...
Click to collapse
Great! I've sent you a PM, can't get your email from this board

I've now flashed it back to the danish rom, and done some further testing.
I've found out that the phone boots fine with either the simcard OR the SD card inserted, but not both at the same time.
I've also found out that this problem seems to be a problem with 64k simcards, and not 32k simcards.
With a 32k simcard everything is just peachy.
Anyone got suggestions?

Edited the title to make more sense now

Seems that both 64k sim and sd cards draw too much current.
Looks like a HTC design flaw.
Did u try other sd cards?

Tried another 1gb card, they're both Kingston though. Both work fine in my P4350 / Herald.

Try with another brand and smaller sd card.
And now that you have your nordic rom back on, I'd also request service from HTC.

ERROR [260] Connection installing WM 6.1??? what to do?

Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks

Need More Info
We need more info to properly troubleshoot...
Make of phone (TyTn II, Tilt, Vario III, etc)
If you are trying to use this rom on anything other than an unbranded HTC TyTn II, then it will not work unless you have used HardSPL to remove carrier branding first.
Check out http://forum.xda-developers.com/showthread.php?t=369282 for more info.

260 errors are usually related to USB port access. If you are using McCafee or Firewall software, you will have problems unless you disable or gifve full access.
Again, to quote NotATreo, more info will help, but consider temporarily disabling firewall or virus software.

Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot

pyk said:
Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot
Click to expand...
Click to collapse
I was able to flash while running the mcafee, but I still can't connect to the internet after flashing the Hard SPL and the radio

Have you try using SD card to flash?
just renamr file "RUU_signed.nbh" to "KAISIMG.nbh" and place the file in your Micro SD card.
Power on the phone and enter bootloader mode by press "power botton" + "camera botton" and using stylus to reset the device. It will auto start reflashing the ROM. It only takes 1min to 2min.

Tried the mcafee thing but then it gave me the Vendor ID Error
Basically there is no way around except for flashing the Hard SPL and removing the vendor thingy.
Not sure if i want to do that cause that will void the warrenty.
Tanks so much guys

Well, technically you are but they don't know it untill you make it noticable and there are ways to make it back to OEM.

pyk said:
Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks
Click to expand...
Click to collapse
Just flash while you are in bootloader screen (tri-color)

Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks

well... When I purchase a new phone, I never think about returning it unless DOA. When I flash my Tilt and iPhone, there is no turning point. Oh well, I change a new phone almost every year......Currently wait on my new N96
pyk said:
Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks
Click to expand...
Click to collapse

well i had to do the same thing but i just used jump.spl. it worked great and now im runnin wwe 6.1.

ERROR 260
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean

sean_kore said:
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean
Click to expand...
Click to collapse
I would try plugging your cable into a different usb port and giving it another try- this has worked for me so far. Good luck

HTC Tytn II recover from bad flash

Hi.
I have not posted much on this site, yet I have used it plenty of times. And first off I have to say "Thank you oh so very much" to everybody who frequent this site. Most of all I would like to thank the developers and rest of the crew that helps users on a daily basis.
I've had plenty of phones the last few years: 9090, 9100, Tytn and now Tytn II - all of which have been flashed - successfully I might add - with software and aid from you guys. (Ok, so my Tytn nearly ended up as a paperweight, but with some fancy maneuvers using the CE SDK from Microsoft I was able to use it as a PDA again)
Now, I am stuck. Really stuck. (Not saying I'm not to blame, but I am still stuck)
I've got a Tytn II (The P4550 HTC Kaiser 120 I believe). A few weeks back I flashed this with Alex's Home ROM (http://wiki.xda-developers.com/index.php?pagename=Alex's ROMs). At the time I was running Radio 1.27.12.11, and continued to use it after the Alex flash.
That worked perfectly.
But being interested in always trying new stuff I yesterday decided to flash Alex.v5.WM61.HTC.302.UltraClean.ROM.beta2. And it really went bad.
I studied up on many postings (obviously not enough) and started the process:
#1: Hooked up the pda to my computer
#2: HardSPL v1
#3: Tri-Color mode and activesync grey
#4: Started the upgrade with KaiserCustomRUU.exe
Everything went smoothly until it hit 99% - there it stuck and the program ended with a communication error. My computer runs Vista (yes, I know. I wont even consider flashing another phone using Vista), but it has worked flawlessly 25-30 times before.
Anyways, what happened when I tried to recover was that the phone went into tri-color mode. Needless to say it was unable to recover. After much back and forth I reinstalled an old laptop with XP (as mtty does not work on Vista) and was able to boot it back in to the OS using a walk trough from this site - cudos to Laurentius26 for the post)
Anyways - it came back. But since it failed the flash I tried it again to make sure it finished properly. What I did was flash back the Alex Home ROM I had in the first place - that worked. Then I flashed back the 1.27.12.11 Radio ROM - which failed - seriously.
It hung on 17% and when reset it would only boot to tri-color. And this is where I am now.
Every time the phone resets it boots to tri-color. I've done and redone the mtty (with and without the task 28), but it stops in tri-color mode. If I at that point hook it up to mtty and issue the boot command it will boot properly, but thats kinda annoying - having to carry with me a XP laptop for each time I have to reset the phone. (Ive also tried the set 14 0 when the phone is in this state, but it will still only boot to tri-color)
So - what now?
I've tried flashing the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship, but it stops with 294 - invalid vendor id. I've tried flashing the same ROM with HardSPL installed - no vender id error but it fails at 16%.
In desperation I've tried HTC_Kaiser_NL_ROM_1.56.404.6_Radio_22.45.88.07_1.27.12.17_Ship, but this also fails at 16%.
I've studied many a post on this site, but have so far been unable to recover from this error.
Is there any hope of regain the much needed functionality of normal booting?
Hopefully there is.
Thanks in advance.

Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo

Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Most definetly.
These were also posted by e-men in another topic this morning so I am currently installing Windows XP on a computer at work to try this.
Will report back.

Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?

Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
ulfthomas said:
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Click to expand...
Click to collapse

WM6.0 and WM6.1 radio's are different, they are not compatible!
So be carefull which radio version you are flashing
Info about radio versions:
http://forum.xda-developers.com/showthread.php?t=349375
Cheers,

Laurentius26 said:
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
Click to expand...
Click to collapse
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?

This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
ulfthomas said:
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
Click to expand...
Click to collapse

Laurentius26 said:
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
Click to expand...
Click to collapse
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?

Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
ulfthomas said:
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Click to expand...
Click to collapse

Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
And all good tips Leo.
OS: Windows XP SP2. Freshly installed. Only Activesync 4.5 added.
HTC: Is orignial. Patched a few times using HardSPL
Original rom: As mentioned above I've tried a couple of them, but both ending in invalid vender id.
And no usb hub present.
Another comment - the flashing done today and yesterday has been done from two different xp computers - but with same result.

Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.

I'm going to upload a shipped ROM for you, this one if you didn't try it yet?
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Another question... did you use Custom RUU with ROM update?
http://forum.xda-developers.com/showthread.php?t=334890
ulfthomas said:
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
Click to expand...
Click to collapse

Yup - that one has been tested - fails with invalid vender id.
Also tried flashing that rom with HardSPL - comm. error.
And no, I have not tried the Custom RUU. Will for sure try that now.

The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?

Yes... try with another shipped ROM please?
ulfthomas said:
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Click to expand...
Click to collapse

Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.

Use one more time MTTY, clear all FATS and I've send you a PM.
ulfthomas said:
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Click to expand...
Click to collapse

If you're getting an invalid vendor id it sounds like your hardspl or superCID isn't working correctly. Before going any further it's probably best to go to your bootloader screen and check that hardspl is still installed.
After that, I'd try flashing from the SD card.

Good point ach2, but when launching HardSPL and starting the update it lists the correct data on the bootscreen (Jumpspl or something equivavlent to that)
Leo: Looking around xda I found an article about dumping the ROM from another device. In the same thread I found a link to dumped original ROM. I patched that and it worked like a charm.
My PDA came back to its original state.
After arriving home just now I thought I would give your ROM another go, but same result - stuck at 16% (With HardSPL and Custom RUU)
What can cause this?

OH GOD!! is my Uni dead? NO GSM

Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.

Hi,
Please consider a new battery.
As strange as it may sound, one of my MDA Pro's had similar symptoms with battery at 70%. Replacing the battery with a new one fixed it right away.
The symptoms were:
- less network signal
- random turning off of radio
- could not access phone settings
- radio crash when trying GPRS connection
Also, on my other MDA Pro, I had problems like this, but they were caused by radio ROM 1.18. I changed to 1.15 and everything is fine since.
It seems that aging batteries are a major problem for weird issues. Just buy a new one at ebay and dont start flashing as a fool, cause you can risk a brick.
Cheers,
vma

My battery is actually new... just bought it 2 weeks ago.. and I tried the phone with both my new and old batt. still no luck -_-
I can't flash any radio rom now... is my Uni certified dead?
Any help would be great.. thanks

Try charging the battery first in another universal if possible, if battery is ok, put it in and try again, read Wiki and check if you can go to boot loader mode, check whether pc recognising the Uni once on etc.,

Read everything and the computer recognised my Uni ... tried MTTY tools to reset all the DOC partition in my Uni yet no way to reflash my radio rom again

I think as long as PC is recognising, dont consider it as DEAD. Its very much alive and keep hopes.
as I read through this forum, Radio ROM flashing is the most risky thing and often takes longer.
If you are not already considering, try only flashing radio rom and do not club with extrom etc, try redownloading the ROM or try a different version from a different link, unless you are particular about the one you are trying.
Always use the original USB cable supplied with the Uni.
Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. Connect Unit to PC to the USB port directly and not through a USB HUB.
Start flash again..
All the best

ronaldphl said:
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Click to expand...
Click to collapse
From the problem behavior it seems your device got GSM locked, I'm afraid it's permanent. But at least try ...
1. Remove the SIM card
2. Must upgrade the bootloaded to 1.01 if it's a G3 (and not upgraded already).
3. Run the Buzz's CID unlocker tool and flash the radio (version 0.00) provided with the tool.
4. Do the HR and check the status

Flashing HardSPL Sprint HTC Snap (s511)

Ok, I'm kind of at my wits end. I've already bricked a Sprint Snap, and I'm trying to get HARD to display on my tri-color instead of 0000 before I try ookba's rom again.
But I can't. I've done everything correct. SDA application unlocker - auto.bat from the JockyW thread, JumpSPL and boot Rom Update Utility. Every time it goes to a 100%, but once I reboot and then hold volume down I still get
CEDA200
SPL-0.34.0000
MicroP-Willow#C (LED) v58B.
No luck. I've tried hard resetting my phone with brand new factory settings (my old 6.1 was heavily modded). I've tried XP and Vista. No luck. When I confirm jumpSPL my screen goes black. Then I run RomUpdateUtility while the screen is black. Is that right? Please advise me, I'd love to have 6.5 on my snap.

Please use the correct version of Hard SPL, suitable for your phone!(S 511). Above all use Jump SPL (depending on your SPL version) and follow the prompts in the DOS window. Just press space bar. On your phone, screen will turn black this is NORMAL!Then free to interact in any way with the phone and without disconnecting the phone from the PC will need to run Hard SPL.Again attention, according to your platform (S511).After all this if all is well you should install the favorite ROM .
Good Luck!!!

i have followed these steps
I have started the romupdateutility with the black screen and it completes to a 100 percent. however my tricolor splash screen doesn't change.

Strange ...Something is wrong there.Try on another PC, make sure Active Sync or Windows Mobile Device Center is working properly.But most importantly try another JumpSPL and HardSPL, those you have now may have errors or can be corrupt file.Had happened to me with my old Diamond.

what is supposed to happen?
The .0000 should say .HARD if the flash was successful right? If a phone is HARDSPL then it won't change after a hard reset right? I really can't get this to work... is there a newer jumpspl I should try? Everytime RomUpdateUtility completes with the black screen my phone reboots and nothing has changed

DAMN
I just bricked my second snap by trying a different version of JumpSPL, really really upsetting. I can't believe I did that again, all I wanted was my device to be HardSPL and now its a paperweight. UGHHHH no phone certainly isn't better than stock 6.1... I'm probably done trying to 6.5 this damn thing. I'm going to replace it and never mess with it again. Thank you for trying to help.

Sorry man, really sorry. And I agree with you, 6.5 is nothing better than 6.1 and I think so.I have 6.5 and do not see an obvious improvement or an addition to performance.Perhaps a higher consumption of resources.I think it depends on preference.In your case maybe not everything is lost.Read this very very very carefully: "Flashing and Unbricking your Maple" by Ookba.Even if they refer to Maple, can help you.Good luck!

yay!
After getting a new s511, I attempted this for the third time
Well, It worked like magic. .Hard is now visible on my tri-color screen. SO!
Now I can flash the ROM? Do I just turn my phone on to its homescreen and plug it in to run RomUpdateUtility? Any other precautions I should take?
@Johny, thanks so much man for all of your help i appreciate it.

Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!

Johnny_BV said:
Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!
Click to expand...
Click to collapse
salut Johnny . putem vorbi de telefon?

drc38 said:
salut Johnny . putem vorbi de telefon?
Click to expand...
Click to collapse
Please provide an english translation, since this is a english forum

Device Help
I have a HTC Snap 511 from a Wireless Carrier in Puerto Rico it works just as fine as Sprint's. Actually its the same phone under another carrier. I tried Updating the rom i got lucky it boots 6.5 but i downloaded the wrong rom because its for a GSM phone not CDMA now its asking me for SIM and i can't updated to the one it goes ( that i downloaded sometime later )... Tri-Color Says:
CEDA200
SPL-0.39.0000
MicroP-Willow#C (LED) v 58B
i tried putting the s511 Sprint ROM but says at upgrade communication error.
I think its because im downgrading roms?
CEDA is 2.00.XXXX
WILL is 1.50.XXX
Any comments are aprreciated.
PS-
SIM Failure
The SIM card is missing or is not valid.You can still make emergency calls if your service providers supports it.
--##_- 240x320 Fun! -_##--

Which Un RAR arhivator complete work on this device (Snap S511) ???
I`m test all and not working nothing. WM 6.5 and WM 6.1
Not description for Icons in the SYSTEM(WM 6.5) menu... Baaaaad.