Database Info

please help i think i messed up my mda using the rom kitchen

I ran it according to farias instructions I thought. It flashed but now I cant install anything and I cannot write to the storage card or the phone, any cab i try to install is unsuccessful and I cannot save any files to the storage card or the phones memory.
And it appears that I cannot flash the rom again. Am I screwed?

What is you IPL / SPL? IS your phone a G3 or G4? Can you get to the bootloader? (turn off your phone (pull the battery if you have to) then hold the camera key down while you turn it on). You can flash directly to the bootloader (even though activesync won't connect.
BTW: If this stuff makes you nervous, you probably shouldn't be cooking... Your phone will do all sorts of weird stuff when you screw up a build. And you should really know how to recover from most things that can happen...

I have done this before, this is the first time I have ever had a problem. my IPL/SPL is 2.26. And the phone is unlocked.

beowolf said:
I have done this before, this is the first time I have ever had a problem. my IPL/SPL is 2.26. And the phone is unlocked.
Click to expand...
Click to collapse
ok, cool... wasn't sure... So can you get to the bootloader?

yes I can get to it

I am flashing back to the t-mobile 2.26 rom. Working so far, I will leave the cooking alone. Can you recommend a good wm6 rom that doesnt have any problems?

"doesn't have problems" is the catch
I'm partial to my own Crossbow Reloaded ones, but they aren't perfect. If you don't hit the keypad issue with 1.7 though, its pretty close
Core 2.0n is very good and nice and clean.
Also NBD and Wizard Mobile 6 are both supposed to work well.
The new "official" rom we are playing with is beta, but I have to say its really fast and we aren't seeing much wrong with it (but its only been 12 hours since its been released). There are a couple of issues that are fixed with cabs (CommManager for one).
As for cooking, you probably eith had something wrong in a .rgu or somesuch. Just takes a number of builds and flashes to get it right to where it boots (then you debug what you forgot in packages and start over )

Flashing Nightmare: Stuck at Boot Screen + 264/274 Errors!

Yup, first time disaster. I followed the guide here, installed the necessary Cert_SPCS.cab/EnableRapi.cab files, rebooted, and then started the Shelltool update...only to belatedly notice a notification screen on my 8125 asking if I wanted to run one of the programs.
I said yes, but even though the update completed, my 8125 is stuck at the boot screen.
Worse, I reset the 8125 into boot loader mode and tried to flash back, only to get a 300 error. I tried to use an updated RUU and ROM set, only to get 264 or 274 errors.
Any hope here, or did I just manage to brick my 8125?

Are you trying to flash an offical rom while in bootloader mode?

Yup. Tried to flash the official 8125 ROM from HTC. Tried to flash a number of different ROMs, actually - I always get a 264 or 274 "Communication" error, except for the official ROMs, which gave me a 300 error.
Not looking good here...

this has helped me with bad flashes
http://forum.xda-developers.com/showthread.php?t=298613

Been there, done that. In fact, that was the thread I first read. I've tried to flash to Wizard_love, but I get a 264 error.
From what I've read in the RUU Docs, a 264/274 error is rare, and fatal in this case. It's not looking good...
(On the bright side, the iPhone release has created a flood of used 8125's on eBay )

I did a little searching for you,
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
I read some were how to flash a phone that has errors, I couldn't find that post. Maybe someone else here knows of that post You didn't mention is your phone G3 or G4 I did find this post, doesn't look good. I hope someone has a better answer for you, good luck.
http://forum.xda-developers.com/showthread.php?t=304456

Another post I found for you.
http://forum.xda-developers.com/showthread.php?t=294107

Thanks for the links, unfortunately it's still a no-joy situation here.
This is a G4 Cingular 8125 - sorry I forgot to mention that earlier.
ActiveSync was set to allow USB connections, and I've tried using the official RUU update utility from HTC for the Cingular 8125 with the 8125 in Bootloader (3 color) mode - I get an error 274.
I then tried the Wizard_Love version - error 264.
Next, the MB WM6 ROM - error 300.
Finally, in desperation I try the Shelltool app method again, even though I can't copy over the necessary bootloaders. It hangs up mid-flash, as expected.
Can't go forward, can't go back. Looks like I've got myself a brick...sigh...

upd: ahh, it is g4.....
so ignore whats below
it IS NOT brick ,trust me i had exactly same prob while testing cooked ROM - all yyou need is to download chinese rescue ROM, THEN flash it by its RUU, then RUU wLOVE, then flash ..anythin(g3)...and then flash IPLSPL, as it will be unequal, usually.
its unclear, why RUU cant do flash sometimes, but i believe, that you do not have brick( i had same situation 3 times = 14 flashes..;/ but machine is alive !)
of course, you may have same errors with chinese..if connecting, reconnecting etc is not working, then...use any rescue ROM closest to original, old hogs. check your firewall, and remember - SR device before EACH try - oterwise you surely will have 300 error - 1 try for each reset, no more.
chinese rescue ROM(you MUST flash wlove after that 1), or shelltool will lead you to...3bars.;/
http://pda.oleyek.com/ROM/Others/RUU_Prodigy_1070302_103_10703102_CMCC_CHS_Ship.exe
if its not working...maybe that 1..
http://rapidshare.com/files/29657481/RUU_TMobile_US_226102_22610105_022511_WWE_Ship_tmob_rom.exe
maybe other...
wizard love rescue ROM:
http://rapidshare.com/files/8651097/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar

Just a "happy ending" update:
Was just about to buy a new 8125 on eBay, when I gave it another try - hard reset the device twice in a row, then tried again to flash back to the original Cingular 8125 ROM -- it worked!
Then, in a fit of flashing madness, I went ahead and flashed one of Faria's latest WM6 sets -- and it worked as well!
So, not only don't I have brick, I actually got it upgraded. Whew...

pls help for flashing rom
pr0naLd said:
this has helped me with bad flashes
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
I have spent 24 hrs flashing my qtek 9100 sim free - i think it is the g4 as IPL IS 2.17 / SPL 2.17 NO ZEROES THOUGH . IT DOES SYNC BEYOND 99% AND THE HELP WINDOWS COMES OUT - IT GOES BACK TO THE BOOTLOADER SCREEN ( 3 - 4 LINES OF RED BLUE GREEN ). PLS HELP AS I AM DYING TO GET THE WM 6.0 ONTO MY WIZARD. thanks and appreciate.
[email protected]

BOWERS said:
I have spent 24 hrs flashing my qtek 9100 sim free - i think it is the g4 as IPL IS 2.17 / SPL 2.17 NO ZEROES THOUGH . IT DOES SYNC BEYOND 99% AND THE HELP WINDOWS COMES OUT - IT GOES BACK TO THE BOOTLOADER SCREEN ( 3 - 4 LINES OF RED BLUE GREEN ). PLS HELP AS I AM DYING TO GET THE WM 6.0 ONTO MY WIZARD. thanks and appreciate.
[email protected]
Click to expand...
Click to collapse
Kindly confirm its a G3 or G4 before flashing. This will help you out. http://forum.xda-developers.com/showthread.php?t=298613

wizard G4 boot ok but jump to B/L screen
its aliveeee its aliveeeeeeeeee

Have I bricked my Kaiser

Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks

If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.

But doesn't the SPL have to be either Hardspl or jumpSPL.
I have tried to do the rom update again but sticks on 0% and gives error 262

Alemaker said:
If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.
Click to expand...
Click to collapse
Not advisable if he has the default SPL still though which by the number appearing at the tri col screen it appears to be the case.
Try doing a hard reset and see if it boots into the original ROM then at least you will find out if it is bricked or not, however, i'm not sure it will work based on the fact you got part way through in the first place.
Hold down the keys directly next to the Send and End (green and Red) Hold in the stylus and keep them all held untill you get a screen telling you to press the green (send) key.

Tried the hard reset, takes me back into the bootloader. Any other ideas?

Hmm... ok then.... you are pretty much looking at a very expensive paperweight at this moment in time then.
Look at this thread...it "may" (i'm not promising anything but it may point you in the right direction) help you out. Let us know how it goes.
http://forum.xda-developers.com/showthread.php?t=361612&highlight=bricked

cmcmill01 said:
Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks
Click to expand...
Click to collapse
Hate to joint the parade, but the exact same thing happened here - 18% now stuck at 1.93.0000

For anyone else reading this BEFORE flashing a new ROM please read, read and read again EVERYTHING related to flashing on this site, wikis and wherever else you can get info.

Another idea for you. Search around here for how to flash from an SD card that may solve the issue out for you. As previously noted though....READ READ READ and be 110% certain you understand what you are doing before you do anything.

http://forum.xda-developers.com/showthread.php?t=276963&highlight=stuck+bootloader
details some info for a Wizard, should it be the same for a Kaiser?
Will Mtty get me any further?

MTTY will at least give you a USB connection to the device it is worth a shot given your current situation.

There is hope!
I did a clean reboot of my PC and disabled my antivirus (avast) and was able to sucessfully reflash the new 1.62 rom (released from ATT site today).

Thanks will try the new 1.62 rom.
What commands can you use with MTTY?

tried the At&t rom gives me an error on the vendor id. Will try a HTC rom

I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.

If you are stuck in boot loader & would like some help via MSN Messenger, please PM me or look for me on MSM messenger at [email protected]. I will be available to help later this evening or tomorrow morning.
I have most of the files to fix these issues & can use MSN fileshare folders to help you.
Good chance that you can be up again in a matter of minutes

cmcmill01 said:
I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.
Click to expand...
Click to collapse
Invalid Vendor I.D. is cuz it's locked.
Had the exact issue myself and found a ATT ROM that will boot. It saved me bigtime, so I saved it. It's in one of the posts on one of the threads but I have the actual ROM, it'll overide that lock.- PM me if ya need it.

Got the same solution, Holy S**t about to have a heart attack. Tried nearly ever ROM out there, it was the Asia one that got me going.
Lesson learned: make sure you Hardspl after jumpspl.
Thanks for all the help folks

Glad ya got it fixed. One quick question?
Is your original ROM ATT or HTC ?

It is a HTC ROM. Done My Hardspl and got Sleuth v3.0 on it already
Happy days

Almost giving up - Impossible to flash my Tytn II

Hello,
I've tried flashing my Kaizer by all different ways I could, but no way to make it work. I've downloaded a lot of different ROMs (Alex, Dutty, VIET, etc), but I always get stuck in the same point. Either in Vista or XP, RUU always stops with ERROR [262] and the phone after the three-color screen, get in blank with a bar in 0% and gets stuck.
So, I've tried flashing via microSD. No better luck on that; even using different SDs, I always get stuck in a Loading... message in the phone, and nothing happens.
I've read a lot of forums and done all suggestions such as not using Anti-Virus, Firewall, etc and formatting SD as FAT32.
One interesting thing is ActiveSync (and WMDC in Vista) simple "dies" after the phone goes to the Three-color screen so it sounds the "new hardware found" sound but no new hardware seems to become available. I always can soft reset it and my old ROM (and configs) come back, so nothing seems to be done to phone's ROM.
This Kaizer was bought in the US (Amazon.com), unlocked, in Feb/08. I had some rare Freezing Problems on it (freezes while idle).
Today's config:
WM 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
ROM 1.82.721.0 WWE
Radio 1.27.15.32
Thank you in advance for any ideas on flashing this phone.
Regards. RB.

I'm assuming you've RTFM'd, but nowhere do you mention that you have installed Hard-SPL.
http://forum.xda-developers.com/showthread.php?t=334679
Done?

You should probably do more research and reading. Start with the Wiki and specially HardSPL search for it. The answers are in here you just need to search. Welcome to the forum and this is not a spoon fed forum but rather put your time in the research before you brick your phone. HOPE YOU WON'T GET FLAMED....

What about HardSPL?

Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.

sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link

rfbrandao said:
Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.
Click to expand...
Click to collapse
Do a search for HardSPL white screen. There's a thread in this very forum about it freezing on a white screen.
I think I remember some issues with it on Vista, but I don't have Vista, so I don't pay attention.
You must HardSPL first. Search for HardSPL and whatever issue you're having, and I bet you can find a resolution and have it unlocked inside of ten minutes.
Xtreme_G took the time to search and post a link, and still managed to beat me to it. Bastard.

i guess you need a heavy paper weight so keep flashing without installing hardspl or without reading and searching ...

XtreMe_G said:
sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link
Click to expand...
Click to collapse
Thanks alot, i was taking a swig of mt.dew as i was glancing at your reply, thanks to you its coming out of my nose.

let me guess, you were a previous iphone user?

I'm feeling nice. Your answer is here. It will fix all of your problems.

P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
This is beautiful. Definitely solve this problem. ROFL

there's no problem that rick cannot solve

I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB

P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
==
rfbrandao said:
I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB
Click to expand...
Click to collapse
Rick saves the day again.

RUU error (262) update error

Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...

Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card

Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))

greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.

I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want

i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.

hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???

finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one

I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card

Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...

greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.

SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work

I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...

greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.

hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....