Yup, first time disaster. I followed the guide here, installed the necessary Cert_SPCS.cab/EnableRapi.cab files, rebooted, and then started the Shelltool update...only to belatedly notice a notification screen on my 8125 asking if I wanted to run one of the programs.
I said yes, but even though the update completed, my 8125 is stuck at the boot screen.
Worse, I reset the 8125 into boot loader mode and tried to flash back, only to get a 300 error. I tried to use an updated RUU and ROM set, only to get 264 or 274 errors.
Any hope here, or did I just manage to brick my 8125?
Are you trying to flash an offical rom while in bootloader mode?
Yup. Tried to flash the official 8125 ROM from HTC. Tried to flash a number of different ROMs, actually - I always get a 264 or 274 "Communication" error, except for the official ROMs, which gave me a 300 error.
Not looking good here...
this has helped me with bad flashes
http://forum.xda-developers.com/showthread.php?t=298613
Been there, done that. In fact, that was the thread I first read. I've tried to flash to Wizard_love, but I get a 264 error.
From what I've read in the RUU Docs, a 264/274 error is rare, and fatal in this case. It's not looking good...
(On the bright side, the iPhone release has created a flood of used 8125's on eBay )
I did a little searching for you,
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
I read some were how to flash a phone that has errors, I couldn't find that post. Maybe someone else here knows of that post You didn't mention is your phone G3 or G4 I did find this post, doesn't look good. I hope someone has a better answer for you, good luck.
http://forum.xda-developers.com/showthread.php?t=304456
Another post I found for you.
http://forum.xda-developers.com/showthread.php?t=294107
Thanks for the links, unfortunately it's still a no-joy situation here.
This is a G4 Cingular 8125 - sorry I forgot to mention that earlier.
ActiveSync was set to allow USB connections, and I've tried using the official RUU update utility from HTC for the Cingular 8125 with the 8125 in Bootloader (3 color) mode - I get an error 274.
I then tried the Wizard_Love version - error 264.
Next, the MB WM6 ROM - error 300.
Finally, in desperation I try the Shelltool app method again, even though I can't copy over the necessary bootloaders. It hangs up mid-flash, as expected.
Can't go forward, can't go back. Looks like I've got myself a brick...sigh...
upd: ahh, it is g4.....
so ignore whats below
it IS NOT brick ,trust me i had exactly same prob while testing cooked ROM - all yyou need is to download chinese rescue ROM, THEN flash it by its RUU, then RUU wLOVE, then flash ..anythin(g3)...and then flash IPLSPL, as it will be unequal, usually.
its unclear, why RUU cant do flash sometimes, but i believe, that you do not have brick( i had same situation 3 times = 14 flashes..;/ but machine is alive !)
of course, you may have same errors with chinese..if connecting, reconnecting etc is not working, then...use any rescue ROM closest to original, old hogs. check your firewall, and remember - SR device before EACH try - oterwise you surely will have 300 error - 1 try for each reset, no more.
chinese rescue ROM(you MUST flash wlove after that 1), or shelltool will lead you to...3bars.;/
http://pda.oleyek.com/ROM/Others/RUU_Prodigy_1070302_103_10703102_CMCC_CHS_Ship.exe
if its not working...maybe that 1..
http://rapidshare.com/files/29657481/RUU_TMobile_US_226102_22610105_022511_WWE_Ship_tmob_rom.exe
maybe other...
wizard love rescue ROM:
http://rapidshare.com/files/8651097/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Just a "happy ending" update:
Was just about to buy a new 8125 on eBay, when I gave it another try - hard reset the device twice in a row, then tried again to flash back to the original Cingular 8125 ROM -- it worked!
Then, in a fit of flashing madness, I went ahead and flashed one of Faria's latest WM6 sets -- and it worked as well!
So, not only don't I have brick, I actually got it upgraded. Whew...
pls help for flashing rom
pr0naLd said:
this has helped me with bad flashes
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
I have spent 24 hrs flashing my qtek 9100 sim free - i think it is the g4 as IPL IS 2.17 / SPL 2.17 NO ZEROES THOUGH . IT DOES SYNC BEYOND 99% AND THE HELP WINDOWS COMES OUT - IT GOES BACK TO THE BOOTLOADER SCREEN ( 3 - 4 LINES OF RED BLUE GREEN ). PLS HELP AS I AM DYING TO GET THE WM 6.0 ONTO MY WIZARD. thanks and appreciate.
[email protected]
BOWERS said:
I have spent 24 hrs flashing my qtek 9100 sim free - i think it is the g4 as IPL IS 2.17 / SPL 2.17 NO ZEROES THOUGH . IT DOES SYNC BEYOND 99% AND THE HELP WINDOWS COMES OUT - IT GOES BACK TO THE BOOTLOADER SCREEN ( 3 - 4 LINES OF RED BLUE GREEN ). PLS HELP AS I AM DYING TO GET THE WM 6.0 ONTO MY WIZARD. thanks and appreciate.
[email protected]
Click to expand...
Click to collapse
Kindly confirm its a G3 or G4 before flashing. This will help you out. http://forum.xda-developers.com/showthread.php?t=298613
wizard G4 boot ok but jump to B/L screen
its aliveeee its aliveeeeeeeeee
Related
Hi!
Can anybody help me?
I was upgrading with faria's roms.
It all went ok until it reached 99%. after waiting for around 5 minute at that point, it sad that there was a communication error with the phone, and i need to do some recovery actions(remove from the usb, remove the batteries) It said that if i can see 3 bars, then everything is ok.I could see it, so i restarted the upgrade utility. But it did not want to do anything. It said to get a newer version of the upgrade utility. and my phone remained in that 3 color state, having 3 messages on it: IPL 2.16 then on the other corner saying RUU, then in a next row SPL 2.16
Can anybody help me to fix this phone?
Thank you in advance
ghola_2 said:
Hi!
Can anybody help me?
I was upgrading with faria's roms.
It all went ok until it reached 99%. after waiting for around 5 minute at that point, it sad that there was a communication error with the phone, and i need to do some recovery actions(remove from the usb, remove the batteries) It said that if i can see 3 bars, then everything is ok.I could see it, so i restarted the upgrade utility. But it did not want to do anything. It said to get a newer version of the upgrade utility. and my phone remained in that 3 color state, having 3 messages on it: IPL 2.16 then on the other corner saying RUU, then in a next row SPL 2.16
Can anybody help me to fix this phone?
Thank you in advance
Click to expand...
Click to collapse
Mine did something similar - PC Blue-screened about half way through the upgrade and left the Wizard at the Bootloader screen. I tried to re-run the upgrade and it said I needed a different version of the upgrade utility. I just re-installed the WM6 MB version and this worked fine, once it was back up and working I re-ran the Faria upgrade and it worked fine.
I think if you just copy the 'nk.nbf' file from Faria's ROM and use the upgrade utility from the MB version it will work.
HTH
Andy
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/showthread.php?t=271043&highlight=CID+unlock
DR.P'S UNLOCKING THREAD worked wonders for me.
BTW, after following Dr. P's instructions and loading Faria's ROM, my MDA took approx. 13-15 minutes at 99% before I hit the glorious 100%. Like a wise person before me said, patience is a virtue. I waited until the 5 minute mark, got up, used the restroom, grabbed an ice cold Pepsi and then waited some more.
Hi there,
I have a MDA Vario (G4) from T-Mobile and after following this http://forum.xda-developers.com/showthread.php?t=297762 and this http://forum.xda-developers.com/showthread.php?t=293480
I was able to install Faria's ROM on my Wizard but now i'm having some problems:
1 - I still have to watch that ugly bootscreen
(by the way, are those version numbers "right"?)
2 - Every time i reboot it i get this error about sddaemon
Problem solved:
knwlsh said:
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
Click to expand...
Click to collapse
3 - I often get this error about TimeWizard.exe
4 - As you can see on the previous photo, the memory is running low and so I everytime i try to syncronize with ActiveSync 4.5 (Beta2) i get this
Can anyone help me on those?
Thx
(Forgot to say thank you to Faria and Mun_rus. So... Thanks a lot!)
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Did you flash with shell tool? I think that you have no extended rom flashed, only OS.
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
funman said:
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Click to expand...
Click to collapse
DON'T use the 2.26 rom.... u've got a G4 and can't update IPL/SPL!
I downloaded this ROM
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
and tried to flash it but when it starts (the PPC screen turns red,green,blue) it gives me an error msg on the PC saying "ERROR [294]: INVALID VENDER ID"
(this PPC came from UK)
I tried to use the mun_rus How To with this ROM but apparently it stayed the same.
From the UK T-Mobile i can only find this http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but i think this is what a I have now running.
Ideas???
-----------------------------------------------------------------------
As for the Extended Rom i followed this:
http://forum.xda-developers.com/showthread.php?p=1172768&highlight=extended+rom+g4#post1172768
but i will double check it the next time i flash my Wizard.
(deleted - the same as the above)
Problems Aswell
Sorry if this has been mentioned many atime before but my rom is like really slow sometimes and most of the time on the today screen only the time/date is shown and no other items. Also when turning on the device sometimes it doesnt get pass the boot screen (green one) and is resolved by taking the battery out which is annoying. Someone said by putting the orginal factory rom then installing farias rom then it will improve - tried that same thing. And outlook wont let me change email type from plain text to html.
Anybody Know???
seanmig said:
Tried this one:
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
The PPC screen goes red, blue, green but then it gives me an error msg on the PC saying "WRONG ID VENDOR" or something similiar.
Click to expand...
Click to collapse
Missed my post or want a bricked device? You're CID-locked.... look here:
http://forum.xda-developers.com/showthread.php?t=298613
Actually I did miss you post.
Wizard still working
As for the link that you suggest it ends with de Mun_rus' HowTo and that was the one that i followed to flash Faria's Rom
--------------------------------------------------------------------------
knwlsh:
Sddaemon problem solved. At least it seams so...
Hey,
I just did the SAME upgrade you did and I am getting the same
timewizard.exe popup!
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
I have EVERYTHING working on wm6 with faria except for the annoying
popup.
have you been able to get ride of it?
Jeff
jeffr said:
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
Click to expand...
Click to collapse
Is that a WM5 backup you restored? WM6 has stuff in the registry in different places. You've probably added a bunch of keys that shouldn't be there, and in the wrong place.
Also, WM6 PIM database is different format. If you restored that, its likely thats been hosed too.
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !