Hi
I have a problem connecting with my modem, I have to reconect a lot of times to get some internet and after some minutes it gets disconected.
The modem is a Thomson ST585 with software version 7.2.5.1 my ISP is Telmex.
My phone is an elfin with WM 6.1 Onyx 2.2 Patch 2.
By default the modem have some problems with the internet conection but the lan is good. In my elfin I can't get internet and lan (with Total Commander) when it says that it's conected to the wifi modem.
Is this can be corrected with an update of the modem? or is a problem in the phone with the wep security?
sorry for the errors in the english
Related
Hi everyone,
I need some help with my phone, my friend upgraded my phone to WM6 for me. After that he left town, so I'm lost on how to fix this. Before the upgrade I had no problems with my Wifi. Now I can't connect to my wireless router, I can connect to my friends but not my own. Its very strange, I wanted to know if anyone else had this problem and if you guys know how to fix this.
It is a wireless G router and I tested in Mix mode and in G only without any luck. Its not my router because my laptop works, encrytion and without encrytion. It works with the usb cable and with edge or GPRS.
Rom 1.1.0.811 WWE
Rom date 8/11/06
Radio 2.19.11
Protocol 4.1.13.09
Thanks in advance
Having same problem almost..i can connect to certain networks, while other networks work only like 1 out of 10 times....seems im going back to wm5 unless this darn wifi issue is solved..any solution anyone ???
I read with most new ROM images that they should have problems with wifi connecting. I think this is a misunderstanding.
The universal can connect to 54mbit networks only at 11mbit speed. it can connect to WPA secured networks only with TKIP encryption.
Not with WPA2 or AES! i think a lot of people here make this mistake!
so please test this and confirm my findings
If I remember my WiFi networking, you can configure a fast network (54 or 108Mb/s) to allow slower devices or not to.
So it can depend on the network.
In theory, yes, you can connect an 11Mb/s device to a 54Mb/s network. Mine works like that.
a small correction
latest WM6 images fail to connect to hotspot with WPA (TKIP) secured. there is a small trick to bypass it (shutdown and start the device).
It work
So ... I have a D-Link 2100AP - up to 108Mb/sec. I connect with notebook at 54MB/sec. WPA-TKIP
With Universal, at 5-11MB/sec - everything is ok.
This is with JWright 2.02.02 ROM and radio 1.18.
But, for example, with Indra latest wm6 rom, don't work. I find the AP with signal Strenght of 81%, I select WPS-PSK, TKIP, provide the password, but nothing
I have 2 questions:
1. Internet over wifi doesn't work. I think wifi is working fine, becouse conmanager easiliy find my home AP and conect to AP.
But IE dosn't working at all over wifi,and over usb(activsync) IE working fine. Any solution??
2. Can i use activesync over wifi or join to my local network over wifi?
I have Qtek 8310
ROM: Greek WM6 ROM v5 by NiTroGen
OS: WM6 5.2.1616.18120 - Radio: 02.61.01 - SPL: 2.00.0014
budy wi-fi connection has some issues, that it gets connected with pc, or ppc, coz the connection settings are stored in router.. but as the connection remains down so IE wont work atall..and on wi-fi router u cant guess net connection is working or not.. check with ur net connection..
malhaar said:
.. check with ur net connection..
Click to expand...
Click to collapse
i think i don't understand u...
i can connect my laptop on my AP,
solution is maybe in aplicatio "Tornado Wi-Fi Settings "
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
- my system is: windows mobile 6, OS 5.2.318, build 15341.0.0.1
hey guys,
I have the same problem. just flashed the new v3.6, can connect to the router, can even ping the mobile from my laptop via wlan, but still get the no connection error - from IE and opera.
what can I do?
EDIT:
finally got it. just had to change the type of internet from 'private/work' to 'internet'. thats it. stupid comment about vpn under it confused me...
fikol5 said:
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
I will try that
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
its ok
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
Click to expand...
Click to collapse
whatkind manager u use? i use "tornado WI-FI settings"
on home network i use static IP's
adsl router, 192.168.1.1 (gateway)
wirelles AP 192.168.1.252
phone is connecting with 192.168.1.5 ,
can i use DHCP and DNS?
one more thing, when i go in some caffe with hotspot i don't have any problems with connecting and surfing.
how should i set my wifi settings? i try to connect at home trough the modem provided by my isp (alice Gate 2+ wifi) it dosen't work but with my laptop i just insert the WPA then i'm on!
qtek 8310
rom: WM6 Standard 5.2.1616.18120.0.4.0 NiTroGenious
To diagnose what the problem is, I would first remove wpa and leave the network open. If you can connect at this point, it means wifi on your mobile device is working propertly, so you can continue with the wpa (make sure its not wpa2)
thx for the advise
Dear users,
I'm having trouble setting up 'Internet Sharing'.
Device informatie:
Wizard G3, T-Mobile NL, WM6 NL.
As all other programs work with my GPRS connection, Internet sharing won't connect. When I click 'connect' @ internet sharing, A balloon pops up to tell it cannot connect for unknown reason.
I had this problem with some other ROM's I tried, however, T-mobile WM5 (original) works...
Bytheway; I'm using Windows7 (won't work at XP too, already tried that) =)
Thanks for helping me out!
-- Edit --
Could'nt find anything on the net, getting full backup of my device now and trying Wm5 again within 60 minutes =)
-- > WORKED <--
@ WM5
Why not at WM6?
Which ROM do you have on your Wizard?
I have Xions WM6.1 ROM Build 20273 and I have the same problem. If I tell "Internet Sharing" to make a GPRS connection it fails. Any other program can make a GPRS connection.
Is this a Build 20273 specific problem or can it be fixed? Xions ROM is a kitchen ROM so changes can be done.
No mine is connected to GPRS but cannot connect due to a unknown error.
To solve your problem:
Settings -> Connections -> Manage existing (the gprs connection e.g. T-mobile Internet) -> Dropdown and select 'Connect'
Try again to use ICS
It does not matter if a GPRS connection is established or not. When I start "Internet Sharing" the status is alwyas disconnected. When I tell him to connect I get a bubblehelp that a connection cannot be established.
I tried it with no GPRS connection and I tried it with an established GPRS connection (discribed in your last posting). Always status: disconected!
I already build a vanaĆlla ROM to be sure that it is not an other software that makes the trouble.