HI all,
I'm experiencing the following problem with my Cruise.
When having the Cruise connected to my PC through USB cable (Activesync on), mobile applications other than IE cannot access the Internet.
My configuration is:
on ActiveSync
my computer is connected to: "work network"
on the Cruise
start > parameters > connections > connections
advanced tab > network selection is set to work network for both types of networks
proxy configuration on the other tab is the correct one for my network
The only application on the Cruise capable of connecting the Internet with this configuration is IE: when starting, it asks for proxy username & password and pages are loaded correctly.
Any other application (the HTC today screen, when looking for the meteo data, Opera, QuickGPS...) do not arrive to connect the Internet falling in timeout (no request for proxy authentication).
Of course, at home (ActiveSync configured as connected to the Internet) everything work fine and all applications connect to the Internet w/o problems.
Any idea?
Thanks
Hi all.... ive got pretty much the problem? Any solutions guys??
Pretty much same here, except for QuickGPS... it manages to connect somehow.
it works for me, but without proxy...
Maybe this would help you?
Hey Wis38!
Just try to open the following ports ins your proxy:
990 (RAPI)
999 (Status)
5721 (DTPT)
5678 (Legacy Replication)
5679 (Handshake & Legacy Replication)
26675 (Airsync)
For further informations try the MS kb259369 and kb904667.
btw, good luck
Frank
Yeah, thanks.
But I'm not proxy administrator, and can't open those ports...
Any other ideas?
Ask your admin
Hmm...
I think then you have to ask aour admin...
Frank
try this
I had the same problem
you can try this
http://www.mobilitysite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
How can I use my Polaris like USB modem to connect Notebook on internet.
Is there some application or something like that?
Thanks.
try this one
on your device, go to start menu > programs > internet sharing
choose which connection you want to use (USB or BT) then press connect
if you choose USB, plug the USB cable to both PC and device immediately after connetion established.
if you choose BT (you have to make sure that your device have been paired to the computer), connect to your device through BT network access
in internet sharing mode, all activesync connection will be disconnected
there is a registry hack for windows to fix this issue, but normally the issue also effects syncing. But the bad news is that itsmore then likley that your network admin has locked down this type of access.
only IE keeps working via proxy.
Other 3rd party apps seem to prefer a direct connection ignorinng how windows settings are actually used to reach the Internet
I have exactly the same problem: IE can reach the Internet via the proxy in our work network and other apps like QuickGPS cannot.
Strangely enough this happens only with my HTC Touch cruise and does not happen with my Fujitsu Loox N560, which has exactly the same settings.
I have to note that I upgraded recently to WM 6.1 on the TC and that with WM6 it used to work
Any ideas
same problem for me... (qtek S200 & win 6.1)
I have treo 750v, WM6.
I have done the procedure below:
1. Pairing my device with the laptop via Bluetooth.
2. On my Treo, clicked start > internet connection sharing > chosing bluetooth pan > click connect.
3. Device told me to activate Bluetooth on my PC. then I activated my Bluetooth PAN on my laptop. (I'm having BlueSoleil bluetooth manager installed on my laptop).
4. Treo said "Connected". My BlueSoleil manager said connected with an animation showing a link between my device and laptop icons. It even showed some message of its assigned IP address, etc.
But, i can not connect to internet on my laptop. I did ping to google, it said "Request time out".
Very weird, because when I choose USB Cable to do internet connection sharing, the connection is working seamlessly, i can connect to internet, good ping to google or any other sites, but not with BT PAN.
Please advice what to check, what to do, etc.. thanks
no replies yet, i hope someone will read and provide some suggestion for my problem. thanks
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
hapmas77 said:
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
Click to expand...
Click to collapse
I tried it just now as you suggested. it then says network connected. but then i cant connect to the internet from my laptop. so i back to using the USB cable, and it works flawlessly.
i wonder where's the missing key???
Two things:
1. With the Windows bluetooth, once the devices are paired and a connection is established (Internet Sharing on the Treo), goto the little bluetooth icon in the systray and right-click on it. Click on the "Quick Connect" menu and select "Network Access". Once you have clicked on "Network Access" you should see your phone listed (my 750 shows as the name I entered for "Owner Information"). Select your phone and that should do it. These steps are similar to the ones I use for my Macbook as well.
2. Regarding BlueSoleil Manager: when I lasted used it I remember having to set up the serial ports manually so they could be used for communication between the desktop and the phone. I haven't used the BlueSoleil since I had a Treo 650, but I still have the software. I'll load it up and see if I can't help you with your problem.
Regards,
idyllic
So I got to work and loaded up BlueSoleil on a system running MS Server 2003 SP2. The bluetooth dongle I'm using is a TRENDnet TBW-101UB V2 with BlueSoleil version 1.4.9.2 build 041108, stack version 04.03.15.20041105.
I paired my stock AT&T Treo 750 to the machine. Started "Internet Sharing" on the Treo making sure to select bluetooth pan and the AT&T network Once this was done I right-clicked on my phone icon in the BlueSoleil Manager and select "Connect." The I choose the "Bluetooth Personal Area Networking Service" and open a web browser to test... so far its worked every time.
Some notes:
1. The internet sharing on the treo isn't instant, give 20 seconds or so to fully connect.
2. The BlueSoleil manager connects even slower... give it 30 seconds.
3. Try repairing the phone.
4. If using the BlueSoleil software, disable the windows bluetooth as the MAY be a conflict there. Basically use one or the other.
I'm not sure if any of this is going to help, but I hope it puts you on the right track.
Regards,
idyllic
Hello everybody,
I'm trying to get on the internet with my Axim x51v.
And I'm using my Touch Cruise as BT PAN access point (using the Internet sharing option).
I've installer the widcomm bluetooth stack on my x51v, because the Microsoft stack cannot connect to a PAN.
Settings up the PAN connection works perfectly, the x51v even got his IP from the Cruise his DHCP.
But... when I'm trying to browse to a website, it goes wrong
Internet Explorer on the x51v gives the message: "The page cannot be found. Check the name and try again."
I also installed a network sniffer on the Cruise to check which data is send.
This sniffer views the DHCP request, no problem there.
But when I request a website, there are some ARP requests and responses.
AND... there are to packet who look like DNS requests to me, but there source address is the x51v's MAC address and th destination is the Cruise, and there's never a response.
So... I tried to connect to a website by IP instead of hostname, to check if this is a DNS problem, but without any luck
But there is a difference, the sniffer now only shows the ARP requests and responses and Internet Explorer gives a different message: "The page cannot be displayed or donwloaded because the connection was lost. Check the connection and try again later."
Sorry for the long story... I hope someone can help me with this problem
Or point me in the right direction.
Thanks in advance
did you try working with something other than the x51v?
btw, if you want to save yourself the headache, purchase WMWifiRouter..
I also tested this with my PC and Cruise and it worked perfectly. I was able to access the internet through the Cruise.
Forgot to mention that I did try WMWifiRouter, but got the same problem.
edit:
Maybe its usefull to know that the x51v is running WM6.1 (from Football) and the Cruise is running the official WM6.1 ROM from HTC.
Maybe someone knows another way to access the internet on the x51v through the Cruise.
I did also try the Wifi to 3G option from WMWifiRouter. At first the connection was to unstable to browse, but this problem seems to be solved by holding the Cruise further away from the x51v . But with a distance of almost 3 meters the connection still isn't stable enough, it reconnect about every minute.
And I think a distance of 3 meters between the two devices is to much.
Would it be possible to share the Cruise his internet connection over USB?
My idea is to do this using this CF USB card for the x51v.
if the polaris can read your device as a regular syncing device (like a pc or so) there's no reason why WMWifirouter won't pass your Polaris' 3G or Wifi connection to USB connection on your x51v.
I found another solution!
I (re)enabled DUN on the Cruise (throught the registry) and let the x51v dail in on the Cruise.
At first it wouldn't work, but after some messing with some settings it finally worked!
Thanks for your replies Nir36.
ahh. congrats. and a good idea it is.
if you don't mind, write the exact steps of what you did so i can put it in the GUIDES thread in the Q&A section.
Ok, here's what I did.
First to Enable DUN, which was removed since the introduction of internet sharing. (On the Cruise)
Import this keys into your registry
Code:
[HKEY_CURRENT_USER\Software\Microsoft\ATCmdInt]
[HKEY_CURRENT_USER\Software\Microsoft\ATCIV25T]
"TAPILineName"="Cellular Line"
[HKEY_LOCAL_MACHINE\Software\Microsoft\BTHATCI]
"Port"=dword:5
[HKEY_CLASSES_ROOT\atciuiapp\DefaultIcon]
@="shellres.dll,-8334"
[HKEY_CLASSES_ROOT\atciuiapp\SelectIcon]
@="shellres.dll,-8335"
[HKEY_LOCAL_MACHINE\Software\Microsoft\ATCIUI]
"WarningDisplayed"=dword:0
"Connections"=hex(7):53,00,65,00,72,00,69,00,61,00,6c,00,7c,00,43,00,4f,00,4d,\
00,31,00,3a,00,7c,00,31,00,31,00,30,00,20,00,33,00,30,00,30,00,20,00,36,00,\
30,00,30,00,20,00,31,00,32,00,30,00,30,00,20,00,32,00,34,00,30,00,30,00,20,\
00,34,00,38,00,30,00,30,00,20,00,39,00,36,00,30,00,30,00,20,00,31,00,34,00,\
34,00,30,00,30,00,20,00,31,00,39,00,32,00,30,00,30,00,20,00,33,00,38,00,34,\
00,30,00,30,00,20,00,35,00,36,00,30,00,30,00,30,00,20,00,35,00,37,00,36,00,\
30,00,30,00,20,00,31,00,31,00,35,00,32,00,30,00,30,00,20,00,31,00,32,00,38,\
00,30,00,30,00,30,00,20,00,32,00,35,00,36,00,30,00,30,00,30,00,00,00,49,00,\
72,00,43,00,4f,00,4d,00,4d,00,7c,00,43,00,4f,00,4d,00,33,00,3a,00,7c,00,00,\
00,55,00,53,00,42,00,7c,00,43,00,4f,00,4d,00,38,00,3a,00,7c,00,00,00,00,00
"ImplementationDLLs"=""
"LastConnectionIndex"=dword:0
"LastBaudRateIndex"=dword:8
Kopie all the files from the attached zip file into the \windows directory
Softreset the device
When you turn on bluetooth, the Dialup service will be available
Now we can configure the other device to use this Dialup service.
Using the Microsoft bluetooth stack (did not test this).
Go to Start > Settings > Connections > Bluetooth
Select or add the device with DUN enabled
Check the Dialup service for this device and save the settings
Go to Start > Settings > Connections > Connections
Choose 'Add new modem connection'
Give your connection a name, and select the modem type 'Bluetooth' and choose Next
Select the paired bluetooth you want to use and choose next
Now enter the phone number to dial, dial *99# to use your mobile internet connection and choose next
Now you have to fill in your providers username and password for your mobile internet connection. In my case (Vodafone, The Netherlands) the username and password have to be: vodafone
And Finish the wizard.
Using the WIDCOMM bluetooth stack.
Open the bluetooth manager
Create a new shortcut
Choose 'Connect to Internet via phone' and choose Next
Select your phone model (if listed) and choose Next
Make shure your phone's bluetooth is enable and set discoverable and choose Next
Select your phone, you will automaticly go to the next page
Insert a passkey you want to use to comunicate with your phone and choose Next
Accept the connection on your phone
Check the option 'Use this phone as default connection to the internet', Select 'new connection' and choose Next
Fill in a connection name and the phone number *99# (to use your phone's internet connection). And choose Next
Choose Finish to exit the wizard.
Go to Start > Settings > Connections > Connections
Choose 'Manage existing connections'
Choose Edit
Press Next a few times, until you get the username and password fields
Now you have to fill in your providers username and password for your mobile internet connection. In my case (Vodafone, The Netherlands) the username and password have to be: vodafone
And Finish the wizard.