Database Info

Activesync connects every 5 mins and disconnects.. help plz..

Ever since I installed phonealarm, ActiveSync has been a problem. Either it does not connect or auto-matically connects after every 4 to 5 mins, syncs calender and contacts for one minute and then disconnects.. Problem is if I am transferring a file to storage card, it disconnects before transfer is complete and then reconnects and then disconnects...
Somebody plz help me....

Have you tried this from the WiKi?
How can I stop Active Sync from always turning-on even when it is not connected to my PC?
Go to menu->add server source->write down any server address (fake)->complete procedure then menu->schedule->switch to manually (at the top of the list)
You have to give us more details. Was it working OK before phonealarm? How are you connected? Have you checked phonealarm's settings?
On my experience, the latest version of phonealarm causes problems, so I still am using version 1.58.
---

cktlcmd said:
Have you tried this from the WiKi?
How can I stop Active Sync from always turning-on even when it is not connected to my PC?
Go to menu->add server source->write down any server address (fake)->complete procedure then menu->schedule->switch to manually (at the top
You have to give us more details. Was it working OK before phonealarm? How are you connected? Have you checked phonealarm's settings?
On my experience, the latest version of phonealarm causes problems, so I still am using version 1.58.
---
Click to expand...
Click to collapse
of the list)
After you've done all this, un-check the boxes on the programs being sync'd. This should stop active sync, and creating a control log in windows. Here's a screen shot of un-checking boxes so you understand what I'm talking about.

[SOLVED] Exchange not Syncing Over the Air on All 6.1 ROMs

The Problem: I cannot get Exchange to sync correctly when using any 6.1 ROMs.
AT&T Tilt
AT&T SIM
Exchange 2003
Radio: 1.58.26.20
I really need to be able to Exchange sync in order to accomplish my job. From reading though the many 6.1 threads and searching around, I have found that people seem to be occasionally running into this problem, but there hasn't been any resolutions mentioned yet. The problem for me is that synchronization will not occur in ActiveSync. At one point, it would sync my contacts even though it said the sync failed. Others have reported that it will sync contacts and calendar but not email.
The Active Sync error code that I get after flashing a new 6.1 ROM and setting up Exchange the normal way is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
Here is a list of things that I have tried so far from searching and asking around that did not work:
1. Didn't work: Installing "remove hidden proxy" .cabs.
2. Didn't work: "What, exactly, are you having issues with? It's not an Exchange 2k3 incompatibility, as mine is synching fine. I did have to go into Settings > Connections > USB and turn off advanced network capabilities, though."
http://forum.xda-developers.com/showpost.php?p=1940649&postcount=1155
3. Verify the following Exchange setting (already checked): "On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to 'Ignore client certificates.'"
http://download.microsoft.com/downl...ices-Deploying_Microsoft_Mobile_Messaging.doc
4. Verify the following Exchange setting (not running Exchange 2007): "I also had trouble syncing with Exchange. I run Exchange 2007 and had to enable the option to allow the enrolment of non-supported devices in my ActiveSync policy. With WM5.0 or 6.0 it always worked flawlessly."
http://forum.xda-developers.com/showpost.php?p=1938858&postcount=1025
5: After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
http://forum.xda-developers.com/showpost.php?p=1957501&postcount=3
...attempting to force a sync gives this. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"

Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running.
b) whether you are using ssl to sync with the server
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both.
Rob

Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.

Same here
Hello,
I am having the same problem here.
I am using DCS 1.5 and windows Vista (Windows Mobilde Device Center). It has been working beautifully for a week..
But now I cannot connect the device to my computer through USB. When I do the charge led is on, but the device is not seen by vista.
I checked off "enable advanced network functionnality" in the USB to PC settings.... But nada!
Any help from otehrs would be appreciated.
Juju

I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.

rjefferis said:
Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running. Exchange 2003
b) whether you are using ssl to sync with the server. No SSL.
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both. The PC sync works fine, but over the air it does not.
Rob
Click to expand...
Click to collapse
See answers.

kewlair said:
Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.
Click to expand...
Click to collapse
Lots of good info there. Thanks and I will let you know if this works the next time I flash.

kewlair said:
I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.
Click to expand...
Click to collapse
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.

Camp said:
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.
Click to expand...
Click to collapse
Sorry for the confusion, I thought you were talking USB since you mentionned the PC to USB thing. Still annoying though . I will repost in the DCS thread!

Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.

Sleuth255 said:
Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.
Click to expand...
Click to collapse
It also happened to me on your newest 6.1 ROM Sleuth, thanks for chiming in here. I can only work on this issue during the weekend because come Monday I have to reflash to a working 6.0 ROM. I just reflashed with Dutty's newest 6.1 ROM and here are my updates (updated in first post also):
The ActiveSync error code that I originally got with all of the 6.1 ROMs is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
I get this ActiveSync error code. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"
Thanks for all the help so far everyone.

Anyone else have any other ideas that I can try?

Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck

All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers

Mario said:
All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers
Click to expand...
Click to collapse
Same for me DCS 1.5 and now 1.7 with SSL no problem at all

Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!

eagle 1 said:
Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!
Click to expand...
Click to collapse
Thx but in that case error code would help. Because not working could come from many factor.
More strange is not working config when "upgrading" from WM6 to WM6.1 with STRICTsame config...
So if people could put more details it will help

The error code indicates that your exchange server is set to use client certs btw. Here's the exact recommendation to fix:
1. On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”
Click to expand...
Click to collapse
This is a server-side fix though. If you're not the IT staff that did this, then you need to get them to give you the client cert again.
your upgrade to WM6.1 caused your client side cert to disappear. The cert store on WM6.1 contains different certs in the root store as well which could cause WM6.0 to have the cert your exchange server requires but not this beta version of WM6.1.
Exchange installations which require client side certs are very rare btw which is why everybody is saying "works great here". Generally, server certs are used instead (require SSL must be checked in this case)

eagle 1 said:
Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck
Click to expand...
Click to collapse
Solved. Thanks for everybody's help on this issue. eagle 1's answer above helped me find out what was wrong.
It was a really simple solution, but I have never had to mess with any of these settings on any of my previous WM devices. The solution was: The "Connection Setup" wizard did not set up my connection settings correctly. I had to set BOTH "Programs that automatically connect..." drop down options in the advanced connection settings to MEdia Net.
Thanks again to everyone that helped out.

surprising that you got a 0x80830003 error instead of the more common 0x8500200B (failed to contact server) message

Sprint Touch Pro2 Internet Sharing

Ok, so the data on the phone works... but if I try to tether it and share the internet to my laptop, I get a code 67 saying my username and/or password is incorrect... the thing is that the data works all the time except when tethering...
any idea on how to fix this?
thanks.

Apparently I can fix this error in EPST... however I cant get my MSL through any of the suggested methods... anyone know how to get the MSL from the touch pro2? its an MEID, but using a converted pESN doesn't work with GetSPC...

I am suddenly having the same issues also. I had this working just by installing the ICS and WModem Fix.CAB but then I did a hard reset and reinstalled the ICS and WModem Fix.CAB and now it doesn't work. Could this just be Sprint catching on?

why would you reinstall it? was it not working?

just download from thgis site the wifi software. it worked on my tp2 spri nt

Code:
1. Edit the following regestry entries.
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
2. Start the Internet Sharing application.
3. Hit Connect In the Internet Sharing application.
4. Connect the TP/TP2 to the Laptop/PC via USB
5. Done. No other applications needs to run on the PC/Laptop
Basically, you need to tether with "Sprint", not "Phone As Modem." Just tested this and it worked quite well. If you still are unable to connect, be sure you disconnect and reconnect the phone.

You might want to try to start a data connection manually first from Connection Manager. Then try to tether.

I had the same problem yesterday so i deleted
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
Click to expand...
Click to collapse
Now I don't get the code 67 thing when i start the modified ICS

Use the tp internet sharing fix.
I used the internet sharing fix from the touch pro 1 and it works well. U must make sure u allow dta connection from active sync on the pc...make sure it is turned on through comm mananger..should work like a charm

I have a TP2 now and tether with wmwifirouter. I have never had to do any editing/hacking of the reg or had any of the issues you describe but then I never tried to use ICS alone on TP2. My advice would be to download the free trial and see if that helps.
http://www.wmwifirouter.com/
I used to tether with my SPrint Mogul, first with just ICS in windows but had constant dropped connections. Then tried PDA net and had similar issues. I thought the newest PDAnet version might help so I purchased it but same issues. Still waiting for my refund.
Then I got wmwifirouter for my Mogul and it was like a beautiful dream. It worked 99.5% of the time. The difference in reliability between ICS and wmwifirouter or PDAnet + Activesync vs wifirouter cannot be overstated. Did I mention I really like wmwifirouter?
wmwifirouter doesn't depend on crappy Activesync on the PC side to function which may be part of the difference.
As for PDAnet, I used to save the error messages and email them to the company periodically. Eventually I ran out of hard drive space.
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=31 (state=8193)!
Connecting to your Device...
Dialup failed, error=797 (state=0)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=31 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
Connecting to your Device...
Connecting to Data Network...
Dialup failed, error=638 (state=2)!
Connecting to your Device...
Connecting to Data Network...
Dialup failed, error=638 (state=2)!
PDAnet connection failure 3039
PDAnet connection failure 3033
"cannot connect with the current connection settings. tap "settings" to change" after having been successfully connected for ~5 min
"cannot connect for an unknown reason" after having been successfully connected for ~5 min.
"make sure PDAnet is running on your phone" (it is)
PDAnet connection failure, error 3064
"network connection lost"
PDAnet connection failure 3033
Connecting to your Device...
Connecting to Data Network...
Verifying User Name and Password...
Dialup failed, error=619 (state=8193)!
PDAnet connection failure, error 3064

Simultaneous Voice and Data on CDMA?
jakert50 said:
Code:
1. Edit the following regestry entries.
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
2. Start the Internet Sharing application.
3. Hit Connect In the Internet Sharing application.
4. Connect the TP/TP2 to the Laptop/PC via USB
5. Done. No other applications needs to run on the PC/Laptop
Basically, you need to tether with "Sprint", not "Phone As Modem." Just tested this and it worked quite well. If you still are unable to connect, be sure you disconnect and reconnect the phone.
Click to expand...
Click to collapse
I did the above Reg Hack and now I can't get data while on the phone. Of course I can't remember if I could EVER get voice and data on CDMA as I just switched from GSM where that is possible.
I'm on Sprint and as soon as I use my phone the connection goes from an Ev to a 1x and it only switches back to Ev when I hang up. Is this normal or a result of the hack?
Thanks.

jonner said:
I did the above Reg Hack and now I can't get data while on the phone. Of course I can't remember if I could EVER get voice and data on CDMA as I just switched from GSM where that is possible.
I'm on Sprint and as soon as I use my phone the connection goes from an Ev to a 1x and it only switches back to Ev when I hang up. Is this normal or a result of the hack?
Thanks.
Click to expand...
Click to collapse
On CDMA you can't use data while on the phone. It's how CDMA works. It uses the same antenna/radio. So, nothing is wrong with your phone.

so this thread is confusing me. Are the instructions all you need or do I need to install something for standard internet sharing. Also, is this going through activsync? I have a mac and would like to use this (at rare times) on it. Is my only option a wifi program? Is there a bluetooth method?

I have done the registry hack and got tethering working, but upon a reset, the hack gets undone and the registry goes back to phone as modem. I am having to constantly change that key entry back to Sprint. Is no one else having this problem?

davea said:
I have done the registry hack and got tethering working, but upon a reset, the hack gets undone and the registry goes back to phone as modem. I am having to constantly change that key entry back to Sprint. Is no one else having this problem?
Click to expand...
Click to collapse
Install DotFred's TaskManager
Click select Menu, Tab Options, Select Tab, Services. Find "CM Guardian", click and hold until menu pop up and select "Set Manual".
Reboot
I posted more info here: http://forum.xda-developers.com/showthread.php?t=560865&highlight=enable

Why don't you just install the WiFi Sharing app... it works like a charm and you don't need to pay for internet sharing.

SOLVED
Ok, I had the same problem on my Sprint TP2. Here's the issue:
There is a program running that watches for you to change the "ForceCellConnection" registry key. It changes it back to "Phone as Modem" because Sprint REALLY wants you to pay $30/month for a tethering plan (despite the fact that your phone is capable of doing it for free).
The program running in the background is called "CMGuardian", and you'll find it in the registry under HKLM/Services/CMGuardian and HKLM/Services/CMGuaridan. (Note one is misspelled... probably on purpose by Sprint to keep people from searching the registry for it).
I set the DWORD key "Flags" to 4 in both keys and soft reset. This disabled CMGuardian (and frees up a lot of RAM too).
Next, you can edit the ForceCellConnection key and change it to Sprint permanently. ICS should now work. If you still get Error 67, establish a data connection first (open opera, or just go to conn manager and turn on data), then click Connect in ICS.

squishy2008 said:
Ok, I had the same problem on my Sprint TP2. Here's the issue:
There is a program running that watches for you to change the "ForceCellConnection" registry key. It changes it back to "Phone as Modem" because Sprint REALLY wants you to pay $30/month for a tethering plan (despite the fact that your phone is capable of doing it for free).
The program running in the background is called "CMGuardian", and you'll find it in the registry under HKLM/Services/CMGuardian and HKLM/Services/CMGuaridan. (Note one is misspelled... probably on purpose by Sprint to keep people from searching the registry for it).
I set the DWORD key "Flags" to 4 in both keys and soft reset. This disabled CMGuardian (and frees up a lot of RAM too).
Next, you can edit the ForceCellConnection key and change it to Sprint permanently. ICS should now work. If you still get Error 67, establish a data connection first (open opera, or just go to conn manager and turn on data), then click Connect in ICS.
Click to expand...
Click to collapse
So what all is CM Guardian doing? We don't really know if it's doing anything else or not. Are we sure we want to stop it if we don't know what all it does?

CM Guardian is a program that keeps certain things within factory specs for whatever reason..
as long as you dont screw something else up in the reg CmG wont even be needed..(i think its to prevent us from reg mods)
if you disable it, edit the reg for tether, soft reset.
open web browser, open internet sharing, click connect, then connect usb to pc to phone and it will work..

+1 for WMWiFiRouter!
Best money I've spent on something for my phone!
Try it at wmwifirouter.com

Wireless tether question

Ok so it won't send signal and 3g says its not being used why wont it work look at arrows
-------------------------------------
Sent via the XDA Tapatalk App

What rom are you using, and what version of WiFi Tether?
Also can you be more descriptive of the problem, are you unable to see the wifi broadcasted from your phone on your computer?
PS i have seem WiFi tether be a bit buggy on some roms, or maybe its just particular versions of wifi tether that cause it, to where you have to go into, and then back out of airplane mode after you start the tether. Have you tried this?

What rom are you using, and what version of WiFi Tether?
Also can you be more descriptive of the problem, are you unable to see the wifi broadcasted from your phone on your computer?
PS i have seem WiFi tether be a bit buggy on some roms, or maybe its just particular versions of wifi tether that cause it, to where you have to go into, and then back out of airplane mode after you start the tether. Have you tried this?
Click to expand...
Click to collapse
Blue echo and its.160 and its all theroms I try it won't work and airplane didn't help at all
-------------------------------------
Sent via the XDA Tapatalk App

rulyskull said:
I try it won't work
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Can you explain this more =D, what happends, can you see the network from your PC, can you see it and connect, but don't get internet? We will need more information if were going to be able to help you =D

I try it won't work
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Can you explain this more =D, what happends, can you see the network from your PC, can you see it and connect, but don't get internet? We will need more information if were going to be able to help you =D
Click to expand...
Click to collapse
It says its working but my up and down don't show and it doesn't say I'm using 3g like the app won't take the 3g and send it out
-------------------------------------
Sent via the XDA Tapatalk App

you can try downloading this version and installing it
http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0_2.apk
I still don't understand. Can you connect to the phone with a computer?
1. You can either connect to the phone over wifi, but don't have internet on your PC
2. You can see the phone as a wireless network, but trying to connect fails
or
3. You can't see the phone as a wireless network.
I know your typing on your phone, but it would make it easier for us to help you if you could give more specific information and used punctuation. I don't expect perfect grammar, but atleast use some periods every now and then. Your sentences run together and I cant tell what your saying. No hard feelings though
EDIT, after re-reading your posts a few times, I think your saying you can connect over WiFI to your phone after you enable Wireless tether, and it all seems good, but you don't have an internet connection on your PC; the wireless tether app never shows any data transferred either direction? If this is the case, open the app, start the tether, connect to it with your PC. Then, on your phone, press menu, then select "Show log", and lets see what it says.
Good luck =)

you can try downloading this version and installing it
http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0_2.apk
I still don't understand. Can you connect to the phone with a computer?
1. You can either connect to the phone over wifi, but don't have internet on your PC
2. You can see the phone as a wireless network, but trying to connect fails
or
3. You can't see the phone as a wireless network.
I know your typing on your phone, but it would make it easier for us to help you if you could give more specific information and used punctuation. I don't expect perfect grammar, but atleast use some periods every now and then. Your sentences run together and I cant tell what your saying. No hard feelings though
EDIT, after re-reading your posts a few times, I think your saying you can connect over WiFI to your phone after you enable Wireless tether, and it all seems good, but you don't have an internet connection on your PC; the wireless tether app never shows any data transferred either direction? If this is the case, open the app, start the tether, connect to it with your PC. Then, on your phone, press menu, then select "Show log", and lets see what it says.
Good luck =)
Click to expand...
Click to collapse
The edit is correct my brother. Sorry for the confusion, ill post what happens.
-------------------------------------
Sent via the XDA Tapatalk App

rulyskull said:
The edit is correct my brother. Sorry for the confusion, ill post what happens.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
ok so i tryed and the log said it was all done but it wonk work at all. so heres the deal ill try to explain it again. ok so i open it up (on every rom with it PRE installed so it should deff work) it says installing files for it. when its done i press the green button, it asks for super user and i press always allow. then at bottom were it should say the down is 0.~ and up is 0.~ it stays at o.o and in my taskbar were it should show im using 3g it doesnt at all. so its like the app cant find the 3g im using or something of that sort. its hard to explain this since i dont understand why it wont work. lastly is there a Cretan pri or anything like that i need to run this?

Looking at the task bar in the first post it shows you are connected to 3g, going from left to right in the pic you attached I see:
Battery(or memory?) % indicator, Wifi Tether icon,Location indicator icon(blue circle with crosshairs), 3g Icon that looks like this (3G), Signal strength bars(2), circular orange battery indicator( only partially visible because battery is low, and the clock.
Did you try the newer version linked to above?
Try the newer version if you haven't, also..
open wifi tether, press menu, go to setup...
be sure bluetooth is not checked,
turn off wifi-Encryption
try changing the SSID
try changing the channel
Disable access control
Does your computer say it connected successfully?
Lets be sure its actually connecting properly. We'll be sure its getting its IPaddress from the phone, and not trying to use default windows ip or no IP
From your computer, go to start->run then type in CMD, press enter.
from there, type ipconfig, and see what your IPv4 Address is.

You may want to uninstall the app completely either through the phone or using adb. Then download this one http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_1_60_htc.apk&can=2&q=HTC+Donut and move it to your tools folder in the sdk.
From command prompt type
Code:
adb install wireless_tether_1_60_htc.apk
Also once you start the wireless tether app can you see it from your computer. You might want to make sure you are choosing the correct network. Some of the wireless apps have AndroidTether as the network name and some have G1Tether. Once you click the correct one you should feel your phone vibrate after it is connected, somewhere between 5 and 20 seconds and in your drop down menu it should say it is connected.

urushiol said:
Looking at the task bar in the first post it shows you are connected to 3g, going from left to right in the pic you attached I see:
Battery(or memory?) % indicator, Wifi Tether icon,Location indicator icon(blue circle with crosshairs), 3g Icon that looks like this (3G), Signal strength bars(2), circular orange battery indicator( only partially visible because battery is low, and the clock.
Did you try the newer version linked to above?
Try the newer version if you haven't, also..
open wifi tether, press menu, go to setup...
be sure bluetooth is not checked,
turn off wifi-Encryption
try changing the SSID
try changing the channel
Disable access control
Does your computer say it connected successfully?
Lets be sure its actually connecting properly. We'll be sure its getting its IPaddress from the phone, and not trying to use default windows ip or no IP
From your computer, go to start->run then type in CMD, press enter.
from there, type ipconfig, and see what your IPv4 Address is.
Click to expand...
Click to collapse
GOD DAMNIT!!!!!!! now it says unable to start rawr i quit lol

Uninstall that version, put 1.6 back on. Turn tether on, then connect from your computer. Then back on your phone, press menu, then access control, and when you see a computer info pop up in that menu, click the check box beside it for good measure. Then give it about a minute or so, then try to connect. See, it may not be the app itself. Go into network connections on your computer, right click the wireless network adapter icon, go to properties. Where it says ip v4, click that and go to settings I believe, then click automatically get ip address. Press ok. Then disconnect from your hero tether and re tether.
-------------------------------------
Sent via the XDA Tapatalk App

Ok, So I was having this same exact problem and still from time to time do. I can connect my pc to it and it is connected but everytime I open the web browser its say the page cannot load, please check internet connection and try again. So after some searching around I found that this worked for me.
1.) start Wifi tether
2.) connect pc to new wifi network (default name "AndroidTether")
3.) on phone while in wifi tether (dont back out or close app) push and hold the phone off button to bring up the power menu
4.) Select Mobile network to disable the connection
5.) repeat last 2 steps but this time to re-enable the connection.
6.) close browser on computer and open back up... and...
Presto!!! internet connected and working great.
Dont know why it does this but it is a good work around.
Hope it helps and works for you as it did for me.

Uninstall that version, put 1.6 back on. Turn tether on, then connect from your computer. Then back on your phone, press menu, then access control, and when you see a computer info pop up in that menu, click the check box beside it for good measure. Then give it about a minute or so, then try to connect. See, it may not be the app itself. Go into network connections on your computer, right click the wireless network adapter icon, go to properties. Where it says ip v4, click that and go to settings I believe, then click automatically get ip address. Press ok. Then disconnect from your hero tether and re tether.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
It. Won't send signal out at all
-------------------------------------
sent from my god like hero

Can you use the browser on the phone. Or does it only disable data when you try to use WiFi tether
-------------------------------------
Sent via the XDA Tapatalk App

&RoidRage said:
Can you use the browser on the phone. Or does it only disable data when you try to use WiFi tether
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
yes i can use the internet on the phone

rulyskull said:
ok so i tryed and the log said it was all done but it wonk work at all. so heres the deal ill try to explain it again. ok so i open it up (on every rom with it PRE installed so it should deff work) it says installing files for it. when its done i press the green button, it asks for super user and i press always allow. then at bottom were it should say the down is 0.~ and up is 0.~ it stays at o.o and in my taskbar were it should show im using 3g it doesnt at all. so its like the app cant find the 3g im using or something of that sort. its hard to explain this since i dont understand why it wont work. lastly is there a Cretan pri or anything like that i need to run this?
Click to expand...
Click to collapse
it sounds like you forgot a couple of steps... after it asked you for SU permissions and you clicked always allow, it should then be connected..
BUT you have to click menu on your phone, then click access control. make sure your phone says "Access-Control is enabled." if not click "Enable"
Now don't back out on ur phone or anything.. leave it with this menu up..
On you computer pull up your wireless networks, and if your using version 1.60 pre3 then you will see G1Tether. Click to connect.. (make sure ur not connected to any other network at the time and if u are disconnect that first)
once you have connected to G1Tether on your computer, wait about 30 secs and on your phone, in that same menu that u left open, under Access-Control is enabled, it should now have a dialogue that says Connected/Authorized Clients and should have you credentials. MAKE SURE u tick the box. Then click on menu from ur phone and click Apply Settings.
after that u should be connected...

Irisht said:
Ok, So I was having this same exact problem and still from time to time do. I can connect my pc to it and it is connected but everytime I open the web browser its say the page cannot load, please check internet connection and try again. So after some searching around I found that this worked for me.
1.) start Wifi tether
2.) connect pc to new wifi network (default name "AndroidTether")
3.) on phone while in wifi tether (dont back out or close app) push and hold the phone off button to bring up the power menu
4.) Select Mobile network to disable the connection
5.) repeat last 2 steps but this time to re-enable the connection.
6.) close browser on computer and open back up... and...
Presto!!! internet connected and working great.
Dont know why it does this but it is a good work around.
Hope it helps and works for you as it did for me.
Click to expand...
Click to collapse
This is the exact method I had to do to get it to work for me. Sucks though because it took me an hour of screwing around with it to finally figure it out.

bk718 said:
it sounds like you forgot a couple of steps... after it asked you for SU permissions and you clicked always allow, it should then be connected..
BUT you have to click menu on your phone, then click access control. make sure your phone says "Access-Control is enabled." if not click "Enable"
Now don't back out on ur phone or anything.. leave it with this menu up..
On you computer pull up your wireless networks, and if your using version 1.60 pre3 then you will see G1Tether. Click to connect.. (make sure ur not connected to any other network at the time and if u are disconnect that first)
once you have connected to G1Tether on your computer, wait about 30 secs and on your phone, in that same menu that u left open, under Access-Control is enabled, it should now have a dialogue that says Connected/Authorized Clients and should have you credentials. MAKE SURE u tick the box. Then click on menu from ur phone and click Apply Settings.
after that u should be connected...
Click to expand...
Click to collapse
dude i love you so much!!!!!! that worked and holy crap im running youtube and a game no prob thats good sig!!!! thank you!

If anyone wants a completely bug-free wireless tether:
1. make a folder called android.tether on your SD card.
2. Unzip the file below into that folder.
3. Download the newest Wireless Tether from the market.
4. Enjoy bug free tethering.

[Q] HELP: c00d07c9 error in wireless sync

Hi there
I have a problem with my new HTC Trophy.
It works fine with my Wireless router, It connects fast when I'm in home, and I can surf and get emails and all the stuff.
But then I tried to use zune for configure the wireless sync and problems came.
Zune detecs fine my SSID (withc is not hidden and doesn¡t have MAC adress filter active). Then I click on "Set up wireless sync" button and on the next screen, on the "Confirm Network" one, this is what happens when I click "next":
"Can't detect your phone"
An error has ocurred.
Zune was unable to connect to the wireless network access point.
Error code: C00D07C9."​
I really don't understand what is going there. because My zune works pretty fine downloading apps and sync the phone.
Help Anyone?
Thanks in advanced!

I had the same problem with my Omnia7. I found out that you need to disable windows firewall or anyother antivirus firewall when doing the first sync.
Also, connect the phone to the computer and leave it idle for 10-15 mins before you setup wireless sync.

Oh man thanks very much for your help.
Just as soon I turned Off my windows Firewall the sync was completed without any kind of error.
Cheers!

I'm glad i could help.
Cheers

omniauser7 said:
I had the same problem with my Omnia7. I found out that you need to disable windows firewall or anyother antivirus firewall when doing the first sync.
Also, connect the phone to the computer and leave it idle for 10-15 mins before you setup wireless sync.
Click to expand...
Click to collapse
so, after the first sync you can turn your firewalls back on though, correct?

yes, I'd also add an exception for zune.exe to the firewall too

omniauser7 said:
I had the same problem with my Omnia7. I found out that you need to disable windows firewall or anyother antivirus firewall when doing the first sync.
Also, connect the phone to the computer and leave it idle for 10-15 mins before you setup wireless sync.
Click to expand...
Click to collapse
This worked for me also.. Great tip..

Worked for me as well. Thanks a lot

Nice one, I just spent 10 min trying to connect to an AP i forgot that i activated the access control months ago
*then it clicked*

I have same problem with Omnia 7. My laptop running Windows 7 64 bit is connected to same wireless network as my phone. Connection on both systems works without any problem. But when I try to setup wireless sync I have same problem like described here. I disabled Windows Firewall and also real time protection in Microsoft Security Essentials. I do not use any other security software. Any other solution?

same here

I'm also having issues getting wireless sync setup So far I've tried;
Disabling Windows Firewall
Connecting to network via cable
Removing wireless connection in phone and rebooting
Disabling AV
I'm at a loss as to what I else I can try. Wireless on the phone works, wireless on the laptop works, just setting up wireless sync doesn't

anything else to add
I have tried EVERYTHING to get this working. I have disabled everything that might be blocking the ports, I have reinstalled software, you name it.
Nothing.
The strange thing is, the phone worked and synced fine on Windows XP, then I upgraded (moved sideways?) to Vista and now I'm screwed. This is s**t Microsoft.
They can't tell me anything

MAke sure you are signed into the Zune software. i think this has to be done to let zune know that you are connected to the network. I think it is just a wierd bug thats never been caught. for some reason my auto sign in doesn't work. But i couldnt get it to work so i closed zune, then re-opened it signed in (top right corner of zune) then wen to settings and it worked.

I went into settings and click "Forget this phone" so that it would create a new profile. Still didn't work. Then I read on MS support Article ID: 952304 (goo.gl/6nsSm) that it may not work when connected to a public network.
D'Oh, I was connected to my VPN for work so it couldn't find my wireless access point. I disconnected/logged off my VPN, pressed Retry Wireless Sync and it worked like a charm. Then logged into my VPN again. Presto.
Hope this helps someone...

My Samsung Focus has never worked with wireless sync. I got it the day Windows Phone launched in the US and I've been through several hard resets over the past year and multiple reinstalls of Zune.
It sets up fine and then starts to sync and sometimes it will get through a song or two but it will eventually just stall during a transfer and there's no errors of any type. I can leave it there for hours and it won't progress any. I have no firewalls running or connected VPN's.
I've given up trying to get it to work. Very annoying.

I think I found the answer: According to [1] Zune is not compatible with routers using WPA/WPA2 mixed mode. Setting it to ONE of the two should make it work...
[1] http://www.zune.net/de-DE/support/w...help_originalid=C00D07C9&webhelp_locale=de-DE

hi guys,
so i think i have a solution but my modem ist airties it can be change with other models. so i have checked the link that hades has shared in german . yes you need to choose one of thee password code and then you go to ip adress of your modem default gateaway i mean, then then there should be isolation users something you need to untick that then save it . thats what i did and it worked.
i hope it works for you too
cheers

If this problem persists even after all the solutions provided, it is most likely that Zune does not currently properly support your Wireless Adapter associated with the computer.
I have this similar issue, I can sync fine on all computers but my desktop refuses to do so. I have even tried reinstalling everything.

Zune Sync USED to work for me... it now no longer works. The only change is that I've changed carrier ROMs since my phone's original carrier refused to update to 7440 and Internet Sharing. On my new ROM w/7440 I can't get it to work like it had... this sucks b/c I do miss it. Sigh WP7 was suppose to not require ROM flashing and hacking.
EDIT: Got it past the Set Up Wireless Sync prompts by going to "General Settings" on Zune and checking the Always start software when device is connected option box.
EDIT #2:Turns out, that did not get my LG Optimus 7 syncing, as now the PC would recognize the phone over wifi, but would fail to install proper drivers. I next had to uninstall Zune using this MS FixIt tool and then I reinstalled Zune as the tool prompts you. You don't lose any information during this process! And now my wifi sync works perfectly again. FWIW I think all this may have started when I installed specific LG drivers to be able to change LG ROMs.