Database Info

My Jamin getting freez at startup

Hii my friends .. i have Jamin with the Last Origianl rom .. ok .. but after i isnatll some programs .... like live messenger and others .. the device working OK .... but when i try to restart ( soft reset ) my jaine it is getting frezz at logoing windows after light gone .. but to escape this error i must tap on screen te make the light on .. then the mobile getteng start ....
have any one have selution for this annoyed thing....

Make a Hard Reset and install all Apps again.

but that is the hard way and also the longst way .... u know this way will take my all day
no way to make something better than that ....

you doesnt say enough to found your problem ... its like ... A:my computer doesnt work and this is the only answer we get ... sure reset them :->

nothing but
1- hard reset
2- istall all my apllications ..
3- make soft reset ....
4- getting frezz ..

update ur ROM

I have the last Official rom for Jamin

PLease HELP..ROM update !!!

i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?

and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><

Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.

thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!

llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.

thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!

um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !

llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html

thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..

No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.

i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?

make hard reset after flash firmware!

yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !

you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.

llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.

Safe
Thanks guys, you saved my S200
Matos

Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!

Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope

hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice

My Jasjar dead after upgrading

Hi all
I was upgrade my Jasjar by mistake with jam rom, after upgrading my Jasjar didn't work and the screen didn't show any thing (black screen). Please I need help, if any one can solve this problem give me the solution.

Hi!!!
Take it easy.
Trye to see if the device can go to "bootloader" press "camera"+"on/off"+sof reset.
IF you can go to "boot loader", see the wiki in this forum.
Me too have the same problem, but i was enable to fix-it.
Remove the batery form device, until you find the solution, I think tat you can not charge the batery.
(sorry, by not making links, but I am Flashing my Universal)
Good luck

Thank you, my friend
I tried many times to go to boot loader but I can't, any how I am waiting for the solution.

try this . brightness button + power button + soft reset buton (using ur styles ofcourse) lol . then u enter bootloader the hard way i guess. from there connect the usb althou ur active sync may or may not detect the connection . but on ur fone the serial link wud change to USB . then try flashing a shipped rom 1st then . after that do CID unlock (that if u haven done it yet with ur fone). then flash any rom of ur choice

Look in Wiki... there are many methods =) Wiki rules!!
it saved my exec.. =)

i have the same problem and i treid this way it does not go some one told me that to charge the battary by another jasjar but right now i am not able to find one els to charge the battry..
also i did chat with imate support and they advice me to send it to the service center and i don't know what to do.
even wiki does not have a soultion for that.
I think the bootloader is broken and need to be reinstall but how????

of course you've got this bad rom form ce4ara.com right
it's soo bad

well how can the bootloader b fukd man ?? lol anyways here r the two bootloader editions the instructions to which u can find in universal wiki . here is the link ::
http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
well when u connect ur fone in bootloader mode to the pc do u c the "serial" on the top change to "usb" ?? if so go here ::
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
get the mtty utility and do as instructed
ps:: dumb azz customer care knows jus two things if u ask them anything about a screwed jasjar. :: install new shipped rom or get to service centre lol. not any other excusehas added to that list as of yet

aahmed12 said:
of course you've got this bad rom form ce4ara.com right
it's soo bad
Click to expand...
Click to collapse
try stable roms and not beta version to test ur fone efficiency for instance for start install jus shippd rom as they are the most stable with almost no bugs ! so always wen u have a broken jasjar n need to b reconstructed innercorely lol use shipped rom. thats wat i do ales lol

I tried these both links before the problem there is no serial or USB on the screen it's completly black no even when you connect it to usb gives u message on computer unrecoginze device then how to upgrade or reinstall bootloader??
with MTTy says usb device not found frist i have to run bootloader again on my jasjar frist to do what writen in wiki

does ur fone charge up by the wall charger n the charging led turns red? ? mayb ur fone not properly charged or so to even enter bootloader ??

I tried all mouthed but I can't fix it, last tried I toke it to the technician and he said the board was damaged.
Thank you,

Sorry for that but first try to charge you battary by another jasjar it might work

okay man .. if u didnt already solve ur prob
i had that prob b4 & here's the steps i took ( i thought i damaged my chip 2 )
1. disable usb connections in active sync 4 now (or remove it from ur pc)
2. get into boot loader by pressing backlight botton+power botton .. dont press soft reset
3. connect ur USB
4. open the MTTY utility .. download it from the wiki if u dont have it
5. press on USB botton on the right of the MTTY window
6. on the window that appears press (enter) ... a wiered word will appear .. press enter again
7. write task 28 55aa (just write it dont copy or it wont work) and press Enter
8 . write task 28 55aa again and press enter
now u can close the MTTY and setup a new rom on ur device .. just choose a proper 1 from this forums
these instructions worked 4 me & i hope u find it useful if u didnt already solved ur problem

jasjar problem
I completely have the same problem with my jasjar and non of these steps worked with me cuz it wont get in a bootloader
(It wont startup at all)
my problem is not solved yet.

my jasjar die

dear all :
i tried to download new rom to my jasjar but suddelly it did not boot , it just give me empty screen with one word in the above "serial" , when i connect it to my pc the serial work chabge to "usb" , itry to reninstall the rom with no luck , please help guysssssssssssssssssssssssssssssss !!!!!!!

Welcome to forums
Please read the Wiki!!
Hopefully you´ll find your way

1-take out the Memory Card
2-connect the serial cable
3-try to reinstall the rom

glman said:
dear all :
i tried to download new rom to my jasjar but suddelly it did not boot , it just give me empty screen with one word in the above "serial" , when i connect it to my pc the serial work chabge to "usb" , itry to reninstall the rom with no luck , please help guysssssssssssssssssssssssssssssss !!!!!!!
Click to expand...
Click to collapse
This will help; http://wiki.xda-developers.com/index.php?pagename=DOC_Format

hi, it's normal, just reinstall the rom, it's bootloader)))

Hello!
I think my uni is dead:S I can update the rom and the phone is bad. After the uptade its dont boot and dont enter the bootloader mode. Only Hard Reset srceen.
Help me!
Sorry my bad english!

[Q] Windows Mobile 6 Won't boot after first soft-reset !! Black Sceen !! PLEASE HELP!

Hi ! I have an Acer P300 Windows Mobile based device . I have tried to install Android on it ( i was able to install the rom from a device named GeeksPhone ONE which has the same hardware specs. ) , after the installation the screen was on , but all black . After that I've reinstalled my original FW . All went good , only that my phone wasn't reading my SIM CARD and no WI-FI connections ( although I was able to connect with the wifi at a point ).
After a Soft-Reset ( shutdown and startup ) the phone shows the Acer logo with the FW version , and after that the same black screen as with Android .
It might Android damaged my hardware ???

Now my device won't turn on at all .... No vibration on power button , no bootloader , nothing . Please Someone can help me ?? At least some notes ... One reply from you won't hurt !
P.S. Still waiting for some answer !

Now my device won't start at all ... Is completely DEAD !!! ...
If someone will want to answer , I need some help with the battery , I believe that is not charging anymore ! ...
Anybody with the same problem around here ?

lol have your same problem mate xD tell me if u managed to fix this pls