Database Info

After wrong Rom update no Bootmenu MDA Compact 2

Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!

I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar

Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?

jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.

When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.

Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard

Please Help! My JAMin is dead!

help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance

Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD

johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance

Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD

please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened

Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!

Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.

Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin

Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.

PLease HELP..ROM update !!!

i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?

and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><

Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.

thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!

llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.

thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!

um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !

llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html

thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..

No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.

i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?

make hard reset after flash firmware!

yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !

you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.

llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.

Safe
Thanks guys, you saved my S200
Matos

Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!

Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope

hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice

[Plz Help] device can not pass the bootloader

hi all...
last time i try to flash my universal with wm6.1 , i see an error on my pc on ROM Upgrading progress... and after that i try many roms (wm5 Original,wm6 & 6.1) for several times but i see that error again & again & ... now my pc can detect my device and on bootloader mode the "Serial" change to "USB" when i connect it to pc but i can not flash the rom successfuly,and i can not hardreset it or came back to my old rom too
PLZ help me to solve the prblm
sorry 4 my poor english

Read Wiki.
Do a DOC format using mtty and reflash, things should be alright.
Regards

You shold find answeres here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

Tanx for the answer ... i will try it

tanx a lot...my universal back to life

mat226 said:
tanx a lot...my universal back to life
Click to expand...
Click to collapse
Good, I had a fat problem with the clear storage from Ranju's 7.7
I used MTTY to format the flash and my uni backs to life too...

[Q] jasjar problem in bootloader "DOC version is error!"

hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device

majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Have you tryied to hard rest, or look for HTC Universal in the XDA Wiki there is all information you may need. Good Luck

i do this too man but dont work

Reza WM said:
i do this too man but dont work
Click to expand...
Click to collapse
Try use MTTY tool if you stuck in the bootloader. Remove the sim card, The SD Card and have your battery fully charged. When u use mtty you must disable active sync's usb connectoin on ur pc so the mtty can connect through this port. What is the status of your device at the moment? what happens when u connect it to your pc?

here is my problem with mtty

majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Hi, Your Battery Is Dead, U Need To Change One. It Does Not Link To DOC Format. I Have This Problem Before.
Hope It Helps