Database Info

Xda mini Now DEad!!! Somebody Pls Help here

Hi All
I have received a Mini O2 XDA for language change from German to English. Going through the Forums I finally got downloded English Rom.After updating the Phone started to vibrate continously.Now the phone refuses to switch on.When I connect the USB cable ,only red light is seen on the earphone part. I cannot flash also with any other version as the USB does not detects the Phone.
Pls somebody give me a detailed explanation on how to revive the Phone.
Best Regards
Supremegsm

Try to get it into Bootloader: press power & camera & softreset all together & wait till the screen reads 'serial v1.xx'. No backlight so hard to read. If this works, connect usb & flash again with an exe file.
Doesn't sound any good that red led, did you charge it fully?
M

Thank you for your early reply.
I can now get into Boot mode and can read USB V1.02.But sir can you pls tell me where can I download the compatible ROM version .

Battery is fully Charged.

http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
or visit the wiki, link on top of the page, & go to the magician section.
Succes, M

Ok.will try and post results here.
Thks & Rgds

No prob, no fun at all killing your device. Or worse from a bloke who's much taller.

Thank you very much for your solution.Now I can switch on the phone and everything seems to be working perfect. Only one thing when that I have loaded phone rom with i-mate.IS there a way I can load O2 Rom or pls give link where I can download O2 XDA II mini ROM.
Thanks & Rgds
Supremegsm

Take a look overhere ftp://xda:[email protected]/Magician/Extended_Roms/ it contains several O2 branding ext-roms in different languages. Just put the desired cab-files on your storage card & execute them to install. Might be that you want to hard-reset first & skip the I-mate ext-rom from executing by a soft-reset just after the initialization ended (press screen to begin using your device).
Cheers, M

Please Help! My JAMin is dead!

help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance

Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD

johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance

Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD

please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened

Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!

Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.

Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin

Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.

PLease HELP..ROM update !!!

i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?

and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><

Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.

thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!

llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.

thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!

um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !

llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html

thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..

No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.

i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?

make hard reset after flash firmware!

yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !

you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.

llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.

Safe
Thanks guys, you saved my S200
Matos

Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!

Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope

hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice

ROM Update Problem

I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help

You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.

Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help

Hmm, can u fully upgrade your rom ?

Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo

I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.

how to flash dead s710(voxo101)

hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me

kripalu said:
hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me
Click to expand...
Click to collapse
1)press and hold the camera button and insert the usb cable
2)Flash the rom you had first

thanks a lot sir my phone is connected to active sync from your guide now i will hopfully flash the phone thanks

sir as per your guidence i trye to flash the vox but it stoped by givving error no (270) what should i do.
i think it is stopping due to my device is not unlocked
please sugest me

you said yu connected to active sync?
that means your phone is working and to flash a new rom you have to flash the uspl first..check the 1st thread on the vox section

sorry sir it is not connected to active sync but while pressing camera button i inserted the usb cable in phone phone comes in four color screen and i tried to flash the phone with your 6.5 rom it sdays error [ 270]
please help me
application unlock and uspl how is possible in dead phone

sir please help me it is giving error after 3% what should i do

There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.

tobbbie said:
There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.
Click to expand...
Click to collapse
Typing (Not Speaking - Joke) from personal experience... your best bet is to create the gold card with a sd card that's no more than 1gb. you can use the instructions from http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
once you got all the steps down, you will be able to flash the phone with any vox rom, but my recommendation is the clean custom rom from http://forum.xda-developers.com/showthread.php?t=414416 thanks to fireburned!
lots of credit to everyone that assisted me... dsixda,hikkey, hastowent, tobbie... much respect!

You can use any non(!)-SDHC card. You can hardly get small cards nowadays, so a 2GB is the best for later re-use (depite I dont have that problem I bought one just to see if it works - and it does!). Funny thing is that the sector that the Gold Card Key is written to is not used by the FAT (or data), so you can use even a full card and writing the sector to it with QMAP will not spoil the content of the card - so no need to buy one, just lend it if you find someone that trusts you (make a backup copy of the SD content before nevertheless).

thank you chardc but i have serch all the paze for making gold card but i am not able to find mtty and qmat is also trial version please help me

AT FINALLY I GOT OFFICIAL ROM OF VOX but phone is not getting on after 100% flash what could be the problem any body please help me out

okay try this
if ur phone totally dead so first make back working conditions first download vox orignial wm6 roms this roms are in exe files these rom install automatic in ur phone no process need for this roms first ur battery should fully charged then connect ur phone with ur pc for direct bootloader try this method Bootloader
Power off device
Press and hold the camera button
Attach USB to computer and smartphone
Done.
(Works with all HTC Smartphones)
after this method ur phone screen go blank know click on wm6 rom exe file this rom start automatic install in ur phone after install ur pone come back in working condition with wm6 roms this only method that ur phone come back alive